Stripping run cuts
Moderator: Site Moderator
- Hillbilly Popstar
- Site Donor
- Posts: 1396
- Joined: Sun Jan 24, 2016 6:02 am
Stripping run cuts
Who all makes cuts during your stripping run on a pot still?
What's your protocol?
What differences have you noticed in the end product?
What's your protocol?
What differences have you noticed in the end product?
"Making likker with a hydrometer and thermometer is like measuring the length of a 2x4 with a clock"
Re: Stripping run cuts
I draw fores nice and slow at the start of a stripping run. I believe this really reduces the fores and early heads on my spirit runs.
With a sugar wash I don't go too deep on the strip to limit the nasty tails. With a flavoured wash / mash / beer I go deeper to hopefully grab late flavours that might be interesting in the final blend.
With a sugar wash I don't go too deep on the strip to limit the nasty tails. With a flavoured wash / mash / beer I go deeper to hopefully grab late flavours that might be interesting in the final blend.
----------
Zed
When the Student is ready, the Master will appear.
If you can't explain it simply, you don't understand it well enough.
Zed
When the Student is ready, the Master will appear.
If you can't explain it simply, you don't understand it well enough.
Re: Stripping run cuts
Depends what I'm making. Sugar wash ain't whiskey, ain't rum, ain't brandy, ain't fruit, etc. and within all of them I''ll run differently depending on the style I'm aiming for.
What are you making?
What are you making?
-
- Master of Distillation
- Posts: 3387
- Joined: Thu Dec 01, 2016 6:27 pm
- Location: Ontario
Re: Stripping run cuts
I guess a better question would be why make cuts on a stripping run..Hillbilly Popstar wrote: ↑Fri Feb 28, 2020 5:06 pm Who all makes cuts during your stripping run on a pot still?
For one, a pot still is not will design for doing cuts or compressing for making cuts..
The low volume abv of a wash/mash if really not beneficial for making cuts..
The nature of how a pot run does not encourage cuts, as all four component are all mixed in the run..
Just a few thoughts on the matter..
Mars
" I know quite certainly that I myself have no special talent. Curiosity, Obsession and dogged endurance, combined with self-criticism, have brought me to my knowledge and understanding "
– Albert Einstein
– Albert Einstein
-
- Master of Distillation
- Posts: 3387
- Joined: Thu Dec 01, 2016 6:27 pm
- Location: Ontario
Re: Stripping run cuts
If I read it right, it would imply that you use different power energy setting, in other word, run the stripped either slower for flavor and go deeper in the overall average, and faster for neutral and not go as deep overall..
If so, those are not cuts..
Mars
" I know quite certainly that I myself have no special talent. Curiosity, Obsession and dogged endurance, combined with self-criticism, have brought me to my knowledge and understanding "
– Albert Einstein
– Albert Einstein
Re: Stripping run cuts
That's why I didn't use the word 'cuts'.
-
- Master of Distillation
- Posts: 3387
- Joined: Thu Dec 01, 2016 6:27 pm
- Location: Ontario
Re: Stripping run cuts
Thanks.. that why I wanted to point it out.. most stiller's don't understand how the use of power can make a different in the end product in stripping, not cuts..
Mars
" I know quite certainly that I myself have no special talent. Curiosity, Obsession and dogged endurance, combined with self-criticism, have brought me to my knowledge and understanding "
– Albert Einstein
– Albert Einstein
- Hillbilly Popstar
- Site Donor
- Posts: 1396
- Joined: Sun Jan 24, 2016 6:02 am
Re: Stripping run cuts
2 reasons I can think of,StillerBoy wrote: ↑Fri Feb 28, 2020 6:01 pmI guess a better question would be why make cuts on a stripping run..Hillbilly Popstar wrote: ↑Fri Feb 28, 2020 5:06 pm Who all makes cuts during your stripping run on a pot still?
-To decrease the amount of undesired volatiles smearing into the kept fraction of the spirit run. Or in other words, increase the hearts.
-To promote and nurture the esterification that happens during distillation. (This later one is something I understand very little)
Also, I'd argue that because of the nature of pot distillation, the art of making good cuts is even more imperative.
"Making likker with a hydrometer and thermometer is like measuring the length of a 2x4 with a clock"
- Hillbilly Popstar
- Site Donor
- Posts: 1396
- Joined: Sun Jan 24, 2016 6:02 am
Re: Stripping run cuts
Then tell me about the ones in which you find making cuts during the stripping run to be beneficial.
And why?
"Making likker with a hydrometer and thermometer is like measuring the length of a 2x4 with a clock"
- Hillbilly Popstar
- Site Donor
- Posts: 1396
- Joined: Sun Jan 24, 2016 6:02 am
Re: Stripping run cuts
From my reading, making cuts during the first distillation is common amongst scotch makers.
I'm wondering if any bourbon, rum, and brandy distillers find the practice beneficial as well.
This article is the one which has my curiosity peaked:
https://www.bostonapothecary.com/from-f ... de-simple/
I'm wondering if any bourbon, rum, and brandy distillers find the practice beneficial as well.
This article is the one which has my curiosity peaked:
https://www.bostonapothecary.com/from-f ... de-simple/
"Making likker with a hydrometer and thermometer is like measuring the length of a 2x4 with a clock"
-
- Master of Distillation
- Posts: 3387
- Joined: Thu Dec 01, 2016 6:27 pm
- Location: Ontario
Re: Stripping run cuts
There is a difference between low wine and spirit.. in a strip run pot mode, if one does the fores at a drop rate, and do the same for the head section, and discarded them, then I guess they would end up with less heads.. but there will also be a lost of flavor, and a higher cost in running time, when the same can be done in reflux column run for spirit..Hillbilly Popstar wrote: ↑Fri Feb 28, 2020 6:59 pm To decrease the amount of undesired volatiles smearing into the kept fraction of the spirit run. Or in other words, increase the hearts.
In a strip run pot still mode, you can not control the amount of undesirable from smearing into the low wine by making cuts like a reflux column can.. you only have control of the amount of energy used and duration of run during the process.. and by controlling the power used and the duration of the run, those are the only tools available to impact the result of the low wine..
If you are after flavor or more of it, you may want to look into how to control the power usage and the duration of the run.. that in turn will provide you the opportunity to create a better finish product.. this process has been documented many time here..
Mars
" I know quite certainly that I myself have no special talent. Curiosity, Obsession and dogged endurance, combined with self-criticism, have brought me to my knowledge and understanding "
– Albert Einstein
– Albert Einstein
- Hillbilly Popstar
- Site Donor
- Posts: 1396
- Joined: Sun Jan 24, 2016 6:02 am
Re: Stripping run cuts
Even in strip mode, whilst running as hard and fast as you can, it stands to reason that the early distillate contains a higher percentage of heads and the late distillate contains more tails.
Just cause there is more smearing than is occurring during a spirit run, doesnt mean that the distillate doesn't still change throughout the run.
It stands to reason that if you cut a slightly larger portion than a regular foreshots portion you'll end up with less heads smearing throughout your hearts on the spirit run.
Likewise, if you were to slow down and catch a jar of tails that contains a lot of fusel oils, you cant count on those not showing up during the spirit run either.
I am looking to see if anyone has actually practiced this and been able to meet a larger or more high quality hearts cut during the spirit run.
Mars, did you happen to peruse the article I shared above? It's not as if I am making all this up. Apparentlynuts a common practice for distillers aiming to net certain styles and flavors.
Just cause there is more smearing than is occurring during a spirit run, doesnt mean that the distillate doesn't still change throughout the run.
It stands to reason that if you cut a slightly larger portion than a regular foreshots portion you'll end up with less heads smearing throughout your hearts on the spirit run.
Likewise, if you were to slow down and catch a jar of tails that contains a lot of fusel oils, you cant count on those not showing up during the spirit run either.
I am looking to see if anyone has actually practiced this and been able to meet a larger or more high quality hearts cut during the spirit run.
Mars, did you happen to peruse the article I shared above? It's not as if I am making all this up. Apparentlynuts a common practice for distillers aiming to net certain styles and flavors.
"Making likker with a hydrometer and thermometer is like measuring the length of a 2x4 with a clock"
- Hillbilly Popstar
- Site Donor
- Posts: 1396
- Joined: Sun Jan 24, 2016 6:02 am
Re: Stripping run cuts
Btw, I am not suggesting that it's possible to cut all of the heads or the tails during a spirit run. So if that's what you think I am getting at, I think you may have misunderstood me. Sorry if I wasnt more clear.
"Making likker with a hydrometer and thermometer is like measuring the length of a 2x4 with a clock"
Re: Stripping run cuts
What? You want me to write up a treatise on everything I do just in case you might happen to want to do one of them one day? It's never gonna happen.Hillbilly Popstar wrote: ↑Fri Feb 28, 2020 7:00 pmThen tell me about the ones in which you find making cuts during the stripping run to be beneficial.
And why?
And no, I don't do 'cuts' on a stripping run. I take a foreshot, or not, depending on what I'm making, then shut down when I have collected the low wines I want for what I'm making.
- Hillbilly Popstar
- Site Donor
- Posts: 1396
- Joined: Sun Jan 24, 2016 6:02 am
Re: Stripping run cuts
No, I just figured you were smart enough to just include whatever might be relevant.NZChris wrote: ↑Fri Feb 28, 2020 9:39 pmWhat? You want me to write up a treatise on everything I do just in case you might happen to want to do one of them one day? It's never gonna happen.Hillbilly Popstar wrote: ↑Fri Feb 28, 2020 7:00 pmThen tell me about the ones in which you find making cuts during the stripping run to be beneficial.
And why?
And no, I don't do 'cuts' on a stripping run. I take a foreshot, or not, depending on what I'm making, then shut down when I have collected the low wines I want for what I'm making.
Would have been a whole lot easier to just say no from the start.
I should have clarified that I meant cuts, other than the usual foreshots in my OP. I guess i thought that was obvious.
I swear, sometimes getting a conversation started around here is like pulling teeth.
"Making likker with a hydrometer and thermometer is like measuring the length of a 2x4 with a clock"
- Hillbilly Popstar
- Site Donor
- Posts: 1396
- Joined: Sun Jan 24, 2016 6:02 am
Re: Stripping run cuts
Btw, I am not looking to make anything specific.
I am looking to better understand the overall concept so I may know when and if it could be of use with any of the various styles I like to make.
Also looking for criticism or conformation of the practice from those who have studied it and/or tried it.
I am looking to better understand the overall concept so I may know when and if it could be of use with any of the various styles I like to make.
Also looking for criticism or conformation of the practice from those who have studied it and/or tried it.
"Making likker with a hydrometer and thermometer is like measuring the length of a 2x4 with a clock"
Re: Stripping run cuts
When I'm making something I've never made before, I research that. Never mind all the other stuff, my research is focussed on the product I want. When that job is done, I move on to the next one.
That way, I'm only pulling one tooth at a time.
That way, I'm only pulling one tooth at a time.
- Hillbilly Popstar
- Site Donor
- Posts: 1396
- Joined: Sun Jan 24, 2016 6:02 am
Re: Stripping run cuts
Maybe just check out the article.
Then you'll at least see where I am coming from.
You dont even have to agree with the practice, I'm not even sure I do, havent really tried it yet. But at least you'll see I am not just making shit up. Although, theres not really anything wrong with that either, as long as you're not flailing around in the dark.
Then you'll at least see where I am coming from.
You dont even have to agree with the practice, I'm not even sure I do, havent really tried it yet. But at least you'll see I am not just making shit up. Although, theres not really anything wrong with that either, as long as you're not flailing around in the dark.
"Making likker with a hydrometer and thermometer is like measuring the length of a 2x4 with a clock"
Re: Stripping run cuts
Look up graphs of components that come over in a spirit run. Heads components start high and finish low, tails components start low and finish high, but the amounts in the original charge affects the levels through the entire run. You can have some control over them by how much of these components you leave in, or remove from, the low wines when doing the strip. Use that control when creating your products.
- Hillbilly Popstar
- Site Donor
- Posts: 1396
- Joined: Sun Jan 24, 2016 6:02 am
Re: Stripping run cuts
How is this different from making cuts? Maybe I am misunderstanding you, but it sounds like you just described and suggested making cuts during a stripping run.NZChris wrote: ↑Fri Feb 28, 2020 11:51 pm Look up graphs of components that come over in a spirit run. Heads components start high and finish low, tails components start low and finish high, but the amounts in the original charge affects the levels through the entire run. You can have some control over them by how much of these components you leave in, or remove from, the low wines when doing the strip. Use that control when creating your products.
"Making likker with a hydrometer and thermometer is like measuring the length of a 2x4 with a clock"
- jonnys_spirit
- Site Donor
- Posts: 3667
- Joined: Wed Oct 21, 2015 7:58 am
- Location: The Milky Way
Re: Stripping run cuts
Just because you might make a low wines cut on a strip doesn’t mean you have to throw it away lol. What about cutting LW about 50/50 with feints and hearts (sure it’ll be smeared) so you then collect two different LW profiles for two different pot spirit runs?
Cheers,
Jonny
Cheers,
Jonny
————
i prefer my mash shaken, not stirred
————
i prefer my mash shaken, not stirred
————
- still_stirrin
- Master of Distillation
- Posts: 10344
- Joined: Tue Mar 18, 2014 7:01 am
- Location: where the buffalo roam, and the deer & antelope play
Re: Stripping run cuts
He already told you:Hillbilly Popstar wrote: ↑Sat Feb 29, 2020 6:12 amHow is this different from making cuts? Maybe I am misunderstanding you, but it sounds like you just described and suggested making cuts during a stripping run.
So, the amount of heads in the low wines can be controlled by the size of (if taken) the foreshots. And the amount of the tails left in can be controlled by the %ABV of the low wines collection, or “when” the strip is shut down.NZChris wrote: ↑Fri Feb 28, 2020 11:51 pm....Heads components start high and finish low, tails components start low and finish high, but the amounts in the original charge affects the levels through the entire run...
You can have some control over them by how much of these components you leave in, or remove from, the low wines when doing the strip. Use that control when creating your products.
Also, if you pay attention to the recipe and how you ferment it, you can control the proportions of congeners present in the distiller’s beer to begin with, which affects the amounts of heads and tails you have to deal with during the stripping runs.
See, he already told you...if you’d just listen.
ss
My LM/VM & Potstill: My build thread
My Cadco hotplate modification thread: Hotplate Build
My stock pot gin still: stock pot potstill
My 5-grain Bourbon recipe: Special K
My Cadco hotplate modification thread: Hotplate Build
My stock pot gin still: stock pot potstill
My 5-grain Bourbon recipe: Special K
- Hillbilly Popstar
- Site Donor
- Posts: 1396
- Joined: Sun Jan 24, 2016 6:02 am
Re: Stripping run cuts
I am listening, but a larger fores cut is by any deffinition a heads cut.
So if there is reasoning behind how and where you increase the cut, that's the part I am trying to discuss here.
Also, you cant control tails by how deep you run the strip.
The reason is cause the late tails often contain the flavors and components you want, but the fusel oils that you might want to cut come over earlier.
There is also to consider, during a stripping run the abv is much lower than a spirit run. So certain unwanted oils and fatty acids will not go into solution in the low wines, whereas they will be much more difficult to sperate during a spirit run.
So if there is reasoning behind how and where you increase the cut, that's the part I am trying to discuss here.
Also, you cant control tails by how deep you run the strip.
The reason is cause the late tails often contain the flavors and components you want, but the fusel oils that you might want to cut come over earlier.
There is also to consider, during a stripping run the abv is much lower than a spirit run. So certain unwanted oils and fatty acids will not go into solution in the low wines, whereas they will be much more difficult to sperate during a spirit run.
"Making likker with a hydrometer and thermometer is like measuring the length of a 2x4 with a clock"
- Hillbilly Popstar
- Site Donor
- Posts: 1396
- Joined: Sun Jan 24, 2016 6:02 am
Re: Stripping run cuts
I like that idea. Then you can choose to blend them later, or not.jonnys_spirit wrote: ↑Sat Feb 29, 2020 6:31 am Just because you might make a low wines cut on a strip doesn’t mean you have to throw it away lol. What about cutting LW about 50/50 with feints and hearts (sure it’ll be smeared) so you then collect two different LW profiles for two different pot spirit runs?
Cheers,
Jonny
"Making likker with a hydrometer and thermometer is like measuring the length of a 2x4 with a clock"
-
- Master of Distillation
- Posts: 3387
- Joined: Thu Dec 01, 2016 6:27 pm
- Location: Ontario
Re: Stripping run cuts
I surely did read the article, and it's not a bad article for someone who has not expanded or wants to expand his knowledge of understanding on how to use a still or on the many possibilities of using a still.. but I think you missed this part in the article, and I quote: "One of my goals was to give an introduction to the topic and some general advice for distillers of low levels of involvement. Many of the ideas are speculative. I was hoping to shed light on the science just below the surface of many distilling rules of thumb."Hillbilly Popstar wrote: ↑Fri Feb 28, 2020 9:15 pm Mars, did you happen to peruse the article I shared above? It's not as if I am making all this up. Apparentlynuts a common practice for distillers aiming to net certain styles and flavors.
His advise is very much in line to what I stated earlier.. plus the rest is a lot of ? ? ?
Mars
" I know quite certainly that I myself have no special talent. Curiosity, Obsession and dogged endurance, combined with self-criticism, have brought me to my knowledge and understanding "
– Albert Einstein
– Albert Einstein
Re: Stripping run cuts
Heads isn't a thing. Tails aren't a thing. Heads, hearts and tails are all made up of the same components, but in different amounts.
In my shed, heads is the name for the early distillate that didn't make the heart cut and I only get heart cuts from spirit runs. If you want to have a different definition in your shed, that's ok.
In my shed, I use the word 'cut' when talking about spirit runs, but I don't actually do cuts for most products I make, instead, I choose blends from the jars I've collected. I still use the word 'cut', but I know I really mean choosing a blend.
By taking fores, you can reduce components like ethyl acetate in the low wines. Whether, or not, or by how much you should do this, depends on your take on the product you are making. Removing the same sized foreshot from an apple strip that you might do for a whiskey is likely to be a mistake.
In my shed, heads is the name for the early distillate that didn't make the heart cut and I only get heart cuts from spirit runs. If you want to have a different definition in your shed, that's ok.
In my shed, I use the word 'cut' when talking about spirit runs, but I don't actually do cuts for most products I make, instead, I choose blends from the jars I've collected. I still use the word 'cut', but I know I really mean choosing a blend.
By taking fores, you can reduce components like ethyl acetate in the low wines. Whether, or not, or by how much you should do this, depends on your take on the product you are making. Removing the same sized foreshot from an apple strip that you might do for a whiskey is likely to be a mistake.
- Hillbilly Popstar
- Site Donor
- Posts: 1396
- Joined: Sun Jan 24, 2016 6:02 am
Re: Stripping run cuts
Ok, fine. If your really want to be so pedantic dont judge me for voicing my frustration.
The term cuts, comes from cutting a portion out of a run.
So anything that doesnt get in the "blend" is a cut.
Cutting during the stripping run can mean the same thing. The portions getting cut dont progress to the spirit run.
You can reduce the amount of volatiles that generally are responsible for the "heads" and you can also reduce the number of fussel oils.
What I am looking for is anyone who has done either of these with enough success to justify the effort.
Chris, you are one of the members here who is general helpful and least condescending. I do not know why you're being so obstinate now. The terminology I am using is normal on this board and I think your smart enough to know exactly what I mean. Furthermore, I am not making shit up. This is a practice done by other distillers. It may not be common, but it peaked my curiosity, so I am trying to learn if any of the respected members here have any experience with it. If you dont have personal experience with it, then why bother commenting?
So why are you being pedantic?
The term cuts, comes from cutting a portion out of a run.
So anything that doesnt get in the "blend" is a cut.
Cutting during the stripping run can mean the same thing. The portions getting cut dont progress to the spirit run.
You can reduce the amount of volatiles that generally are responsible for the "heads" and you can also reduce the number of fussel oils.
What I am looking for is anyone who has done either of these with enough success to justify the effort.
Chris, you are one of the members here who is general helpful and least condescending. I do not know why you're being so obstinate now. The terminology I am using is normal on this board and I think your smart enough to know exactly what I mean. Furthermore, I am not making shit up. This is a practice done by other distillers. It may not be common, but it peaked my curiosity, so I am trying to learn if any of the respected members here have any experience with it. If you dont have personal experience with it, then why bother commenting?
So why are you being pedantic?
"Making likker with a hydrometer and thermometer is like measuring the length of a 2x4 with a clock"
- Hillbilly Popstar
- Site Donor
- Posts: 1396
- Joined: Sun Jan 24, 2016 6:02 am
Re: Stripping run cuts
So you're saying that focusing on a healthy ferment and the controlling the nergy input of your strip and spirit runs renders cutting extra heads and fussel oils out of your low wines to be of no benefit?StillerBoy wrote: ↑Sat Feb 29, 2020 12:56 pmI surely did read the article, and it's not a bad article for someone who has not expanded or wants to expand his knowledge of understanding on how to use a still or on the many possibilities of using a still.. but I think you missed this part in the article, and I quote: "One of my goals was to give an introduction to the topic and some general advice for distillers of low levels of involvement. Many of the ideas are speculative. I was hoping to shed light on the science just below the surface of many distilling rules of thumb."Hillbilly Popstar wrote: ↑Fri Feb 28, 2020 9:15 pm Mars, did you happen to peruse the article I shared above? It's not as if I am making all this up. Apparentlynuts a common practice for distillers aiming to net certain styles and flavors.
His advise is very much in line to what I stated earlier.. plus the rest is a lot of ? ? ?
Mars
"Making likker with a hydrometer and thermometer is like measuring the length of a 2x4 with a clock"
Re: Stripping run cuts
Most of us have. Past and present members here have been successfully using stripping runs to make fine products for years and posting how they do it for our and your, benefit.Hillbilly Popstar wrote: ↑Sat Feb 29, 2020 1:49 pmYou can reduce the amount of volatiles that generally are responsible for the "heads" and you can also reduce the number of fussel oils.
What I am looking for is anyone who has done either of these with enough success to justify the effort.
Try using the search function instead of holding out a spoon then dissing answers you don't like.
-
- Master of Distillation
- Posts: 3387
- Joined: Thu Dec 01, 2016 6:27 pm
- Location: Ontario
Re: Stripping run cuts
Again.. you are failing to understand the article and what Chris is saying.. the main drift of the article was about how acidity affects the end result of the product.. read the article from that point of view..Hillbilly Popstar wrote: ↑Sat Feb 29, 2020 1:52 pm ok you're saying that focusing on a healthy ferment and the controlling the nergy input of your strip and spirit runs renders cutting extra heads and fussel oils out of your low wines to be of no benefit?
So instead of passing judgement on all of us.. re-reading the article from a different point of view, as pointed out above..
You are correct in that it all start in a healthy fermenting environment, and I have stated many of times here in the forum.. but members don't want to recognize its important. then what you do after that is limited by your ability to understand how a still works..
Here's something for you to answer me on.. have you ever check the acidity of your low wine.. have ever check the acidity of you finished spirit.. well I have.. and it does create a different in the finish product when that is understood..
Mars
" I know quite certainly that I myself have no special talent. Curiosity, Obsession and dogged endurance, combined with self-criticism, have brought me to my knowledge and understanding "
– Albert Einstein
– Albert Einstein