I went to band camp

[jedneck]

30 gallon ss barrel for boiler
1" drain
2x 4500 elements
3/4 port for manometer
2" fill port
8" manway/column mount

column
Fully modular 4" plated made from type L
Five perf plates most likely will run 4
deflag 5.5" lomg with 5 tubes of 3/4
Shotgun product condenser 22" long with 4 tubes of 1/2 with a coolin length of 19"

tools used
electic hand drill
angle grinder
chop saw
propain and mapp torches
mess of redneck ingenuity (good thing for auto spell)


Dont have many build pics but will post what I have

[jedneck]

The plates are 2nd hand.
all the plate modules are the same. 5.5 inches lomg with a 2" siteglass.

http://www.harderwoods.com/pipetemplate.php" onclick="window.open(this.href);return false;" rel="nofollow
this is how I ground the saddles. Plug in the diameters and print. Wrap around the pipe and grind to lines.

[jedneck]

Reflux condenser
5.5 imches of cooling woth 5 tubes of 3/4.
all soft soldered

[jedneck]

The block head
top has a 8g wire around the inside to gove better solder joint
the side ferule has a stub of 2" flared out inside the 4" for better strength
Willmtry to remember to get pic of the inside soon

[jedneck]

The shotgun
22?" Long with 4 tubes
1/2 tubes 19" long

[jedneck]

A 2, 4, and 8inch triclamp. BIG difference in size. O thought it was a jump from 2 to 4. 4 to 8 is bigger yet

[cob]

she's a beauty

[Blarney Stoned]

Jedneck, tell us about the barrel.

[jedneck]

Barrelnos a new stainless 30 gallon.
Added a 1" drain in the bottom
fittimgs for 2 elements ome at 4 gallons to cover and the other at close 7
used the 2" bung as a fill port and plan on using the 3/4 as a manometer hookup
column mount os a 8" ferule welded to the top.

will try to get pictures of the barrel boiler tomorrow

[Swedish Pride]

Sure is some tidy work Jed, should do you for a while.
Did you get around to making a packed column to run on top of the milkcan?

[Saltbush Bill]

Nice going Jed

[googe]

Awesome stuff jed . Love the boiler!.

[MichiganCornhusker]

Sure is purdy, I'll be looking forward to your taste testing once you get a couple whiskeys run through it.
I know you tend to the more flavorful spirits so it will interesting to see where you end up with number of plates and such.
I bet she's really gonna sing.

[HDNB]

Awesome work Jed! where did you score the ferrules?

[jedneck]

Awesome work Jed! where did you score the ferrules?

the 2 amd 4 inch came from vision. The 8" is new 2nd hand

[jedneck]

Inside the hat. Should be sturdy.

[frunobulax]

Looks great! You may have already figured it out but, ya may want to put a short piece of 2" after your deflag just before your 2" elbow so it brings your condenser further away
from the boiler so the parrot doesn't hit the boiler.

[Pikey]

That's really nice

A few hours work in there I reckon.

[OtisT]

It's a beauty. Great work Jed.

[ShineonCrazyDiamond]

Jed's not exactly the parrot type of guy. Unless it doubles as a steak knife, an inline thumper, and he was trying to disguise empty shot gun shells from the man

[jedneck]

DOUCE RUN BABY

[Oldvine Zin]

Welcome to the band!!

OVZ

[bitter]

very nice! Time for some apple pie

[emptyglass]

You're all growed up now Jed

[Dallywolf]

Where did you pick up the brass tri clamp flanges?

[jedneck]

Where did you pick up the brass tri clamp flanges?

Awesome work Jed! where did you score the ferrules?

the 2 amd 4 inch came from vision. The 8" is new 2nd hand

[thecroweater]

Looking good Jed