Page 1 of 1

Hello from the South Carolina

Posted: Wed Jan 18, 2012 4:54 pm
by dixiechop72
new to the forums, but have been reading alot, seems I have plenty to learn. Thanks for any help yall can offer.

Re: Hello from the South Carolina

Posted: Wed Jan 18, 2012 5:33 pm
by SteveSC
Welcome Dixiechop.... I'm from the upstate - near Spartanburg - there's a good SC show'n here. Most of us are noobs but everyone was a noob at one time or another.
I've got a 15.5 gal keg - 2" copper column tilt reflux electric still 80 % complete, just need to complete the soldering. There's tons of knowledge here - read first
then ask - you'll get your answers. Good luck and talk soon.....

Re: Hello from the South Carolina

Posted: Wed Jan 18, 2012 5:55 pm
by dixiechop72
I'm also running a keg set up, but mine is more a pot still. I was using 3/8 ling coming out of the top of the boiler and needless to say wasn't catching near the vapor I wanted so it's going back under the knife and were praying for some better runs.meanwhile I'm just trying to learn as much as I can so I'm ready when it's done.

Re: Hello from the South Carolina

Posted: Wed Jan 18, 2012 6:25 pm
by Bayou-Ruler
welcome to HD

Re: Hello from the South Carolina

Posted: Wed Jan 18, 2012 6:58 pm
by NcHooch
Welcome from north of the border Dixie.
Lots of good build ideas as well as recipes here, take your time and it'll all come together

Re: Hello from the South Carolina

Posted: Thu Jan 19, 2012 7:08 am
by nodollas
Welcome Dixie from Spartanburg.....