Hello,
I have been playing for more then a year with the idea of making Rum.
Did some research on the internet and it looked more complicated then I thought.
Just finished building my house, I live in Honduras, gives me the time, but it was
this web side that persuaded me.
What a tremendous amount of information !!
I'm planning to buy the Essential Extractor PSII high capacity - Complete Distiller.
Will this distiller in the Pot Distillation configuration be ok for rum ?
I like the two piece column idea, because later on I would like distill other spirits.
Thanks everybody for this fantastic web side !
Hello from Honduras
8 posts
• Page 1 of 1
Hello from Honduras
by Moscca » Mon May 14, 2012 5:34 am
-
Moscca - Rumrunner
- Posts: 53
- Joined: Sun May 13, 2012 11:11 am
- Location: Honduras
Re: Hello from Honduras
by Bushman » Mon May 14, 2012 7:30 am
Welcome to the forum, I believe that is a brewhaus still and have heard good reports about their products. You might do a search on this site for that still and see what others that own it say. We also have extensive threads on building your own but not sure what the availability of materials are in your area!
"Beer is not a good cocktail-party drink, especially in a home where you don't know where the bathroom is" Billy Carter
The only person you need to be better than is the person you were yesterday!
The only person you need to be better than is the person you were yesterday!
-
Bushman - Master Distiller
- Posts: 4685
- Joined: Tue Mar 30, 2010 5:29 am
- Location: Pacific Northwest if not on the water boating
Re: Hello from Honduras
by Samohon » Mon May 14, 2012 7:38 am
Welcome to HD Moscca... 
♦♦ Samohon ♦♦
Beginners should visit The New Distillers Reading Lounge and the Safety and Related Issues among others...
Beginners should visit The New Distillers Reading Lounge and the Safety and Related Issues among others...
-
Samohon - Site Donor
- Posts: 3297
- Joined: Mon Oct 05, 2009 4:22 am
- Location: Somewhere in the UK...
Re: Hello from Honduras
by Prairiepiss » Mon May 14, 2012 7:43 am
Welcome aboard.
Give the cm mod link in my signature a read through. It will give you some more info on that still. Pay close attention to the mods that BR mentions that Brewhaus will do before they ship it. They are worth the extra money.
Good luck be safe take your time.
Give the cm mod link in my signature a read through. It will give you some more info on that still. Pay close attention to the mods that BR mentions that Brewhaus will do before they ship it. They are worth the extra money.
Good luck be safe take your time.
It'scoldaroundhere. Whenyouloseyourjacket.
Advice For newbies by a newbie.
CM Still Mods
My Stuffs.
Mr. Piss
Advice For newbies by a newbie.
CM Still Mods
My Stuffs.
Mr. Piss
-
Prairiepiss - Master Distiller
- Posts: 11019
- Joined: Sat Dec 18, 2010 7:42 am
- Location: Heatland Prairie USA
Re: Hello from Honduras
by Andy Capp » Mon May 14, 2012 1:57 pm
Welcome to HD Moscca 
A hangover is when you open your eyes in the morning and wish you hadn't.
-
Andy Capp - Swill Maker
- Posts: 224
- Joined: Fri Mar 23, 2012 10:32 pm
- Location: Southern OZ
Re: Hello from Honduras
by Washashore » Mon May 14, 2012 2:00 pm
I own the 3" high capacity, have made the mods, and love the still. Welcome to the brotherhood.
"It's hard to argue with the government. Remember, they run the Bureau of Alcohol, Tobacco and Firearms, so they must know a thing or two about satisfying women." --- Scott Adams
-
Washashore - Distiller
- Posts: 1050
- Joined: Thu Dec 29, 2011 5:40 pm
- Location: New England
Re: Hello from Honduras
by Bayou-Ruler » Mon May 14, 2012 3:55 pm
welcome aboard
Bayou Ethanol ............... Google it!
AFP-LA-15027
AFP-LA-15027
-
Bayou-Ruler - Site Donor
- Posts: 1664
- Joined: Sun Jun 06, 2010 4:50 pm
- Location: SW Louisiana
Re: Hello from Honduras
by Moscca » Tue May 15, 2012 5:14 am
Hello Bayou-Rouler,
I've been reading with great interest your modifications on the Essential Extractor PSII high capacity by Brewhause.
Can you tell me what specific modifications I should ask for to have a better rum distillation unit.
I did send a mail to Rick from Brewhaus and he was asking just what changes I wanted.
It's all new to me and I want to make sure to get the best one I can buy.
Later on I will build my own one, Tig-welding is no problem for me, based on my expertise and the hugh amount of
info on this forum.Thanks.
I've been reading with great interest your modifications on the Essential Extractor PSII high capacity by Brewhause.
Can you tell me what specific modifications I should ask for to have a better rum distillation unit.
I did send a mail to Rick from Brewhaus and he was asking just what changes I wanted.
It's all new to me and I want to make sure to get the best one I can buy.
Later on I will build my own one, Tig-welding is no problem for me, based on my expertise and the hugh amount of
info on this forum.Thanks.
-
Moscca - Rumrunner
- Posts: 53
- Joined: Sun May 13, 2012 11:11 am
- Location: Honduras
8 posts
• Page 1 of 1
Return to ** Welcome Center **
Who is online
Users browsing this forum: Jkhippie and 2 guests