Tell us about your mistakes.

This hobby is fun & enjoyable, but it is not tiddlywinks. Be safe!

Re: Tell us about your mistakes.

Postby blind drunk » Mon Nov 28, 2011 5:23 pm

I took my setup apart after my rummy spirit run. Then I lifted my boiler to flip it upside down and my left hand was stuck to the very hot keg ring. It sizzled and I almost got the grill marks. Ouch. My hand is throbbing in pain. What a dumb ass.
User avatar
blind drunk
Master Distiller
 
Posts: 4649
Joined: Mon Feb 04, 2008 12:59 am

Re: Tell us about your mistakes.

Postby LWTCS » Mon Nov 28, 2011 5:39 pm

Prairiepiss wrote:You are using carrots to make alcohol?


Lots of sugar in carrots PP

You should see Damien's outfit. I'll find it
Trample the injured and hurdle the dead.
LWTCS
Site Donor
Site Donor
 
Posts: 8349
Joined: Mon Jan 26, 2009 6:04 pm
Location: North Palm Beach

Re: Tell us about your mistakes.

Postby Ian Jay » Mon Nov 28, 2011 9:19 pm

LWTCS wrote:
Prairiepiss wrote:You are using carrots to make alcohol?


Lots of sugar in carrots PP

You should see Damien's outfit. I'll find it


I make carrot and beetroot wine, but have never ran it through the still. It tastes surprisingly good, but needs laying down for six months or so. Perhaps next year I will disitl some?
User avatar
Ian Jay
Swill Maker
 
Posts: 184
Joined: Sat Oct 08, 2011 7:28 pm

Re: Tell us about your mistakes.

Postby Odin » Mon Nov 28, 2011 11:57 pm

Went away for a minute to get me a cup of coffee. Came back and saw one of my hoses had come out of the 210 liter vessel I use for cooling. Allmost a swimming pool in the room. Around 30 liters got out. Not the way to impress the Mss.

Odin.
"Great art is created only through diligent and painstaking effort to perfect and polish oneself." by Buddhist filosofer Daisaku Ikeda.
User avatar
Odin
Master Distiller
 
Posts: 3089
Joined: Wed Nov 10, 2010 10:20 am
Location: Three feet below sea level

Re: Tell us about your mistakes.

Postby DamianRyan » Tue Nov 29, 2011 3:40 am

Sorry guys, I posted the photographs of my leg, or thought I did, were they taken down by the administrators? I would certainly understand as they are "graphic" as saying goes, or did I load them up and not post the reply?
DamianRyan
Swill Maker
 
Posts: 105
Joined: Thu May 21, 2009 12:06 pm

Re: Tell us about your mistakes.

Postby Ian Jay » Tue Nov 29, 2011 3:44 am

Odin wrote:Went away for a minute to get me a cup of coffee. Came back and saw one of my hoses had come out of the 210 liter vessel I use for cooling. Allmost a swimming pool in the room. Around 30 liters got out. Not the way to impress the Mss.

Odin.


210 Litres! :shock:

You have a production plant there, buddy! :lol:
User avatar
Ian Jay
Swill Maker
 
Posts: 184
Joined: Sat Oct 08, 2011 7:28 pm

Re: Tell us about your mistakes.

Postby Odin » Tue Nov 29, 2011 3:49 am

No, I only have a 30 liters potstill and some smaller ones. A 50 liter version is under construction. 210 liters is the vessel I keep my cooling liquid in.

Odin.
"Great art is created only through diligent and painstaking effort to perfect and polish oneself." by Buddhist filosofer Daisaku Ikeda.
User avatar
Odin
Master Distiller
 
Posts: 3089
Joined: Wed Nov 10, 2010 10:20 am
Location: Three feet below sea level

Re: Tell us about your mistakes.

Postby WalkingWolf » Tue Nov 29, 2011 5:35 am

LWTCS wrote:You should see Damien's outfit.


Damianryan -- sorry to here about such an unfortunate injury. Hopefully the healing will give you back "most" of the function you enjoyed before.

As Larry mentioned, your setup is worth mentioning (and viewing) again. The link to DR setup.

viewtopic.php?f=36&t=10263&p=6788769#p6788870
Advice- For newbies, by a newbie

kook04 wrote: maybe cuts are the biggest learning curve, here.
User avatar
WalkingWolf
Master Distiller
 
Posts: 1721
Joined: Fri Nov 20, 2009 6:04 pm
Location: LA

Re: Tell us about your mistakes.

Postby The Baker » Tue Nov 29, 2011 5:38 am

It hurts to even think about the accident.

You certainly have my best wishes for a speedy and complete recovery.
The Baker
The Baker
Trainee
 
Posts: 765
Joined: Sun Aug 27, 2006 4:48 am
Location: Australia

Re: Tell us about your mistakes.

Postby heartcut » Tue Nov 29, 2011 5:53 am

That's rough, DamianRyan. Hope you get better fast.

This one didn't hurt, but I had 6 gal rum dunder in 2 old HDPE carboys, dropped one in the garage that we ferment and store in. When a corner broke out of the bottom I dropped the other one trying to stop the spill and it broke too. Dumbass. It takes a lot of time and energy to get rid of 6 gallons of stillage and a couple more passes with a mop to get rid of the smell. The wife isn't pleased.
heartcut

My Theory of Evolution is that Darwin was adopted.
Steven Wright
User avatar
heartcut
Site Donor
Site Donor
 
Posts: 1337
Joined: Tue Mar 29, 2011 9:31 am
Location: Houston, Texas

Re: Tell us about your mistakes.

Postby The Baker » Tue Nov 29, 2011 6:02 am

A while back I was throwing out a bucket of boiling hot spent wash.
And I threw it all over my leg and foot.
Next to me was an open top 205 litre, full, container of cold water.

Well, I've never been quick on my feet but I would have made a ballerina proud, the speed and grace of the high leg lift as I submerged my leg in that beautiful cold water!
The foot was a bit scalded but soon recovered completely.
The Baker
The Baker
Trainee
 
Posts: 765
Joined: Sun Aug 27, 2006 4:48 am
Location: Australia

Re: Tell us about your mistakes.

Postby Prairiepiss » Tue Nov 29, 2011 11:09 am

WalkingWolf wrote:
LWTCS wrote:You should see Damien's outfit.


Damianryan -- sorry to here about such an unfortunate injury. Hopefully the healing will give you back "most" of the function you enjoyed before.

As Larry mentioned, your setup is worth mentioning (and viewing) again. The link to DR setup.

viewtopic.php?f=36&t=10263&p=6788769#p6788870


Thanks for the link WalkingWolf. And well worth the look. I see what you mean Larry.
It'scoldaroundhere. Whenyouloseyourjacket.

Advice For newbies by a newbie.

CM Still Mods

My Stuffs.

Mr. Piss
User avatar
Prairiepiss
Master Distiller
 
Posts: 11225
Joined: Sat Dec 18, 2010 7:42 am
Location: Heatland Prairie USA

PreviousNext

Return to Safety and Related Issues

Who is online

Users browsing this forum: No registered users and 5 guests