Stuck fermetation

These little beasts do all the hard work. Share how to keep 'em happy and working hard.

Moderator: Site Moderator

montyg
Novice
Posts: 4
Joined: Thu Mar 03, 2016 6:30 pm

Re: Stuck fermetation

Post by montyg »

Second time around for this, and virtually same result. Started with -

25kg blackstrap
30kg sugar
50 g ec118
40 gal water
2 cans of tomato paste

Initial reading on Hdrometer was 1.092 - Oct 18th - temp 25c. Today 0 Dec 22nd - 1.020 - Ph 4.37 - No activity to speak of.

What am i doing wrong?

Thanks in advance for some help

mgh
User avatar
shadylane
Master of Distillation
Posts: 10401
Joined: Sat Oct 27, 2007 11:54 pm
Location: Hiding In the Boiler room of the Insane asylum

Re: Stuck fermetation

Post by shadylane »

First I'd test the hydrometer :lol:
And on the next sugar wash I'd use a yeast bomb for nutrients
Blackstrap molasses has a lot of unfermentable sugars, the wash might be done
User avatar
still_stirrin
Master of Distillation
Posts: 10344
Joined: Tue Mar 18, 2014 7:01 am
Location: where the buffalo roam, and the deer & antelope play

Re: Stuck fermetation

Post by still_stirrin »

montyg wrote:Second time around for this, and virtually same result...(OG) 1.092...Today (FG) 1.020...No activity to speak of. What am i doing wrong?
shadylane wrote:...molasses has a lot of unfermentable sugars, the wash might be done
Winner, winner, chicken dinner. :clap:

Montyg, if your hydrometer reads 1.020 and you've got no activity (after starting at 1.092 :esurprised: )...you're DONE.

Rack it to clear and strip it. You're ready.
ss
My LM/VM & Potstill: My build thread
My Cadco hotplate modification thread: Hotplate Build
My stock pot gin still: stock pot potstill
My 5-grain Bourbon recipe: Special K
User avatar
shadylane
Master of Distillation
Posts: 10401
Joined: Sat Oct 27, 2007 11:54 pm
Location: Hiding In the Boiler room of the Insane asylum

Re: Stuck fermetation

Post by shadylane »

still_stirrin wrote:
montyg wrote:Second time around for this, and virtually same result...(OG) 1.092...Today (FG) 1.020...No activity to speak of. What am i doing wrong?
shadylane wrote:...molasses has a lot of unfermentable sugars, the wash might be done
Winner, winner, chicken dinner. :clap:

Montyg, if your hydrometer reads 1.020 and you've got no activity (after starting at 1.092 :esurprised: )...you're DONE.

Rack it to clear and strip it. You're ready.
ss
If, the ferment isn't done, getting it to restart would be almost impossible :lol:
Personally, I've had bad luck restarting stuck ferments
Even if I got it going again, it didn't taste right.
Edited
As SS said "Rack it to clear and strip it"
And watch out for the wash wanting to puke :oops:
montyg
Novice
Posts: 4
Joined: Thu Mar 03, 2016 6:30 pm

Re: Stuck fermetation

Post by montyg »

Thanks Very much folks. When this happened last time our end quantity was down by about a 1/4. I must admit that there was a warning re the thickness of the mollasses that it would be hard to read with the hydometer. I have not experienced any sludge at the bottom at all but the liquid was fairly thick, like floating molasses in very small drops amount.

Going along with unused sugars, should I have started with a greater amount of refined sugar? Thanks admit for the help.

mgh
Last edited by montyg on Fri Dec 23, 2016 3:59 pm, edited 1 time in total.
User avatar
still_stirrin
Master of Distillation
Posts: 10344
Joined: Tue Mar 18, 2014 7:01 am
Location: where the buffalo roam, and the deer & antelope play

Re: Stuck fermetation

Post by still_stirrin »

montyg wrote:...should I have started with a greater amount of refined sugar?
What's your goal here...a higher OG, a higher %ABV of the wash, or less molasses flavor?
My LM/VM & Potstill: My build thread
My Cadco hotplate modification thread: Hotplate Build
My stock pot gin still: stock pot potstill
My 5-grain Bourbon recipe: Special K
User avatar
NZChris
Master of Distillation
Posts: 13115
Joined: Tue Apr 23, 2013 2:42 am
Location: New Zealand

Re: Stuck fermetation

Post by NZChris »

I've never racked and cleared rum and don't know of any reason to unless it is for a continuous still that needs to run 24/7.

The more sugar you add, the more you dilute the molasses flavor so, with that in mind, adjust your recipe to suit your taste.
User avatar
shadylane
Master of Distillation
Posts: 10401
Joined: Sat Oct 27, 2007 11:54 pm
Location: Hiding In the Boiler room of the Insane asylum

Re: Stuck fermetation

Post by shadylane »

It all depends on what you want.

If your going to drink the Rum, young and white
Use more sugar, less molasses and let the wash clear before distilling.

If your going to age it.
Get crude, heavy on the molasses, ferment hot, fast and distill the wash as soon as it's done.

There's also a BIG difference on the cuts
Post Reply