My simple keg setup
Moderator: Site Moderator
-
BoisBlancBoy
- Distiller
- Posts: 1165
- Joined: Wed Mar 27, 2013 7:17 pm
- Location: Tip of the Mitt
My simple keg setup
Well she is nothing serious, but with one run on her belt she seems to work just fine. Just a simple 7.75 gallon keg, with a 12" length of 2" copper pipe. I capped the 2", drilled and fitted a brass compression fitting into the Copper cap and soldered it in. Then just simply ran 3/8" tubing, with another compression fitting oitside the condenser for easy breakdown and storage. I'm working on making a more permanent stand for the condensor.
You do not have the required permissions to view the files attached to this post.