Fermenting under pressure

Any hardware used for mashing, fermenting or aging.

Moderator: Site Moderator

Post Reply
User avatar
jimmayhugh
Site Donor
Site Donor
Posts: 71
Joined: Mon Aug 20, 2018 11:19 am

Fermenting under pressure

Post by jimmayhugh » Sun Sep 20, 2020 10:25 am

I use a Brite tank and spunding valve when I'm making IPAs as it allows me to ferment under a wider temperature range while keeping unwanted esters to a minimum.

I searched the site and didn't see a similar topic as it applies to this hobby, so I thought I'd bring it up.

It seems to me that if you are interested in minimizing ester production for vodka and gin, this may be useful.

Any thoughts?

User avatar
Expat
Site Donor
Site Donor
Posts: 1845
Joined: Fri Feb 24, 2012 3:58 pm

Re: Fermenting under pressure

Post by Expat » Sun Sep 20, 2020 10:40 am

It's funny that you mentioned this. Just yesterday I was watching a presentation video from my local brew club on this very topic.

To me it brings to mind the idea of pushing the needle both ways, increasing pressure to reduce esters for neutral, and maybe finding other ways to do the opposite.

Have to get a spare keg and a spunding valve to experiment with.
_____________________
EXPAT

Current boiler and pot head viewtopic.php?f=50&t=71855
Cross flow condenser viewtopic.php?f=87&t=47632
Modular 3" Boka - pics tbd
___________________

User avatar
bluedog
Novice
Posts: 22
Joined: Tue May 08, 2018 1:30 pm

Re: Fermenting under pressure

Post by bluedog » Sun Sep 20, 2020 12:31 pm

My first instinct would say that increasing the pressure on the fermenter would increase stress on the yeast, and create more esters. Any idea why the opposite happens?

seabass
Rumrunner
Posts: 615
Joined: Tue Feb 26, 2013 1:08 am

Re: Fermenting under pressure

Post by seabass » Sun Sep 20, 2020 3:05 pm

I doubt you'd notice much difference in final product assuming you're already minimizing yeast stress and have good pitch rates. That said, it's pretty damned easy to set a spunding valve and experiment.

Post Reply