Burner with Australian standards

LP NG gas burners of all types. Wood coal or Steam equipment

Moderator: Site Moderator

Burner with Australian standards

Postby Copperhead road » Sat Jan 14, 2017 12:39 pm

I wanted either blichmann hellfire or bayou KAB4 but neither meet Australian standards, I have a ten gallon copper pot
Any suggestions from people in Aussie?????
Stillbilly wars is the sound of a propane jet in the dead of night
User avatar
Copperhead road
Novice
 
Posts: 34
Joined: Thu Jan 12, 2017 4:28 pm

Re: Burner with Australian standards

Postby cob » Sun Jan 15, 2017 2:42 pm

search 3/three ring burner
be water my friend
cob
Master Distiller
 
Posts: 1630
Joined: Sun Jul 26, 2009 4:38 pm
Location: little puffs of dust where my feet used to be

Re: Burner with Australian standards

Postby Saltbush Bill » Sun Jan 15, 2017 8:35 pm

For a ten gallon boiler you don't need a fancy burner like those....just go to a camping store or similar and buy a standard old 3 ring burner.
You may want to invest a bit more in an adjustable regulator, but thats not really necessary.
User avatar
Saltbush Bill
Trainee
 
Posts: 937
Joined: Thu Mar 17, 2011 2:13 am
Location: Northern NSW Australia

Re: Burner with Australian standards

Postby The Baker » Mon Jan 16, 2017 9:07 am

Of course you would know that gas rings that use propane bottles ( which probably most use) are different to the ones for domestic gas. Though you can adjust them by using a different (thing with the little hole in it).
Be safe.
Geoff
The Baker
The Baker
Distiller
 
Posts: 1360
Joined: Sun Aug 27, 2006 4:48 am
Location: Australia

Re: Burner with Australian standards

Postby rad14701 » Mon Jan 16, 2017 12:46 pm

The Baker wrote:Of course you would know that gas rings that use propane bottles ( which probably most use) are different to the ones for domestic gas. Though you can adjust them by using a different (thing with the little hole in it).
Be safe.
Geoff

That thing with the little hole in it is a metering orifice... :idea:
User avatar
rad14701
Master Distiller
 
Posts: 20873
Joined: Wed Dec 19, 2007 4:46 pm
Location: New York, USA

Re: Burner with Australian standards

Postby The Baker » Mon Jan 16, 2017 9:14 pm

Thanks, Rad.
I have only heard it called something else that I couldn't remember. Possibly a 'jet'.
Geoff
The Baker
The Baker
Distiller
 
Posts: 1360
Joined: Sun Aug 27, 2006 4:48 am
Location: Australia

Re: Burner with Australian standards

Postby cuginosgrizzo » Tue Jan 17, 2017 12:48 am

yes, a gas jet, that needs to be changed depending of the gas type.

jet_4.jpg
A gas jet
User avatar
cuginosgrizzo
Site Donor
Site Donor
 
Posts: 447
Joined: Tue Oct 20, 2015 1:41 am
Location: a land of saints, poets and navigators

Re: Burner with Australian standards

Postby rad14701 » Tue Jan 17, 2017 6:17 am

The Baker wrote:Thanks, Rad.
I have only heard it called something else that I couldn't remember. Possibly a 'jet'.
Geoff

Yep... The terms jet and metering orifice are interchangeable in many applications...
User avatar
rad14701
Master Distiller
 
Posts: 20873
Joined: Wed Dec 19, 2007 4:46 pm
Location: New York, USA


Return to Related Gas Accessories



Who is online

Users browsing this forum: No registered users and 2 guests