Hey everyone, thanks for all the help so far. I'm looking to replace the drain valve on my t500 boiler. I'd like to put a SS ball valve in its place. Has anyone here replaced their drain?
Sent from my iPhone using Tapatalk
T500 boiler drain
Moderator: Site Moderator
-
- Master of Distillation
- Posts: 3036
- Joined: Thu Feb 12, 2015 12:03 am
- Location: Texan living in Missouri
Re: T500 boiler drain
Google "stainless steel bulkhead fitting with ball valve" and it should get you close to what you want.
Remember not to blow yourself up,you only get to forget once!
Deo Vendice
Never eat Mexican food north or east of Dallas tx!
Deo Vendice
Never eat Mexican food north or east of Dallas tx!
Re: T500 boiler drain
A while back I was reading a thread (here I believe) that showed a 90 degree copper elbow attached to the drain on the inside of the boiler. This was to be able to drain more out of the boiler without having to tip it out. Can't seem to find it anymore. If anyone remembers it, I'd love to read it again.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk