Page 1 of 1

Anyone up for a Swap Meet?

Posted: Mon Jun 12, 2017 9:18 am
by BoomTown
Hi Folks,

As many of you know, we had to close our distillery last year. We find ourselves with a pretty healthy number of items that would be useful to home distillery as well as craft distillers, and no way to use it.

I'm thinking I might host a Swap Meet and invite all me Distilling friend around the area?

Anyone interested?

Boom

Re: Anyone up for a Swap Meet?

Posted: Mon Jun 12, 2017 10:12 am
by ShineonCrazyDiamond
I know I wound be interested in seeing you guys again :thumbup: . Hope it lands on a manageable time for me :clap:

Re: Anyone up for a Swap Meet?

Posted: Mon Jun 12, 2017 2:12 pm
by Single Malt Yinzer
I'm in.

You can also call Kim (guy) at McLaughlin's, he might be able to use some stuff at the distillery. He has a similar setup to what you had.

Re: Anyone up for a Swap Meet?

Posted: Tue Jun 13, 2017 5:14 am
by BoomTown
Single Malt Yinzer wrote:I'm in.

You can also call Kim (guy) at McLaughlin's, he might be able to use some stuff at the distillery. He has a similar setup to what you had.
Thanks.
d

Re: Anyone up for a Swap Meet?

Posted: Tue Jun 13, 2017 10:29 am
by OtisT
Where are you located BoomTown?

Re: Anyone up for a Swap Meet?

Posted: Wed Jun 14, 2017 7:00 am
by BoomTown
OtisT wrote:Where are you located BoomTown?
I'm in Alexandria VA, but the gear I have in mind for a swap meet is in State College PA. Time line would have to be like late August...

some of the gear would include:

LIST ONE

3. One 300gal plastic tank.

4. One 250gal plastic tank.

8. One sump pump.

12. One 12 cup coffee pot.
13. One 6000 Lbs pallet Jake -sold

15. One 12amp hoover vacuum.
16. Two 30gal plastic barrels with lids-sold

17. Three 32gal trash cans with lids.

18. Two 30gal trash cans with lids.

19. One football barrel with lid.

20. Fourteen 5 to 6 gal buckets with lids.

21. Two 120v pumps.

22. One wooden ore.

23. Two 12v winches.

24. One mop and mop bucket and square.

25. One shop vacuum 12gal.

27. Two and a half boxes of boxes (3×3×5).

28. One heat gun-sent to you

29. One toaster oven.

30. One dolly.

31. Three fans.

Re: Anyone up for a Swap Meet?

Posted: Wed Jun 14, 2017 7:35 am
by ShineonCrazyDiamond
BoomTown wrote:
OtisT wrote:Where are you located BoomTown?
I'm in Alexandria VA, but the gear I have in mind for a swap meet is in State College PA. Time line would have to be like late August...

some of the gear would include:

LIST ONE

3. One 300gal plastic tank.

4. One 250gal plastic tank.

8. One sump pump.

12. One 12 cup coffee pot.
13. One 6000 Lbs pallet Jake -sold

15. One 12amp hoover vacuum.
16. Two 30gal plastic barrels with lids-sold

17. Three 32gal trash cans with lids.

18. Two 30gal trash cans with lids.

19. One football barrel with lid.

20. Fourteen 5 to 6 gal buckets with lids.

21. Two 120v pumps.

22. One wooden ore.

23. Two 12v winches.

24. One mop and mop bucket and square.

25. One shop vacuum 12gal.

27. Two and a half boxes of boxes (3×3×5).

28. One heat gun-sent to you

29. One toaster oven.

30. One dolly.

31. Three fans.
Hey boom. I'm out for the end of August. Got a Little one due then.

Was wonder the particulars of the wooden ore. Been looking for one. How big and how much would you take for it?

Thanks, hope you're feeling better and the family is doing well.

Re: Anyone up for a Swap Meet?

Posted: Wed Jun 14, 2017 11:01 am
by Swedish Pride
an other one SCD :thumbup:
are you part rabbit :lol:

Re: Anyone up for a Swap Meet?

Posted: Wed Jun 14, 2017 11:40 am
by ShineonCrazyDiamond
Oops. Sorry Boom. That was supposed to be a PM. Don't know how I messed that one up. :oops: Feel free to respond by PM.

Re: Anyone up for a Swap Meet?

Posted: Wed Jun 14, 2017 11:43 am
by ShineonCrazyDiamond
Swedish Pride wrote:an other one SCD :thumbup:
are you part rabbit :lol:
Ha. Thanks swed. This one I swear happened from the other side of the freaking room.

Just waiting till a good football game to fix that issue once and for all :thumbup:

Re: Anyone up for a Swap Meet?

Posted: Tue Jun 27, 2017 6:25 am
by BoomTown
This is an example of the kinds of things I'd like to bring to a swap meet this fall, if anyone is interested. We used this as a boiler and the valving includes a high pressure blow-off, and suck-back valve. All the joints were made with silver soldier and copper or bronze fittings. The valve tree mounts to the keg with a standard 2" tri-clamp.

Am looking to trade it or sell it.

Boom