Oak and whiskey

Treatment and handling of your distillate.

Moderator: Site Moderator

Post Reply
User avatar
corene1
HD Distilling Goddess
Posts: 3045
Joined: Tue Jan 08, 2013 8:05 pm
Location: The western Valley

Oak and whiskey

Post by corene1 »

Just when you think you have read enough there is always more. In a recent post a question was asked about spirit being hot after only a few weeks on oak when the spirit had been smooth before the oak. It made me think of how much I don't know about aging and oak . So I started looking and found this article. I think it will help all of us learn a bit more plus there are some great links to information regarding other aspects of distillation. Now I just need to get out my dictionary to figure out some of the words.
http://whiskyscience.blogspot.com/2011/ ... vours.html" onclick="window.open(this.href);return false;" rel="nofollow
User avatar
T-Pee
Site Donor
Site Donor
Posts: 4355
Joined: Mon Feb 18, 2013 9:20 pm
Location: The wilds of rural California

Re: Oak and whiskey

Post by T-Pee »

First two sentences:
Hundreds of different flavour compounds have been identified in whisky. The synthesis and degradation and synergistic properties of these compounds is still poorly understood as there are so many aspects contributing to the result of cask maturation.
Interesting read. I'll call it FM and leave it at that though.

tp
User avatar
S-Cackalacky
retired
Posts: 5990
Joined: Fri Feb 08, 2013 4:35 pm
Location: Virginia, USA

Re: Oak and whiskey

Post by S-Cackalacky »

I tried reading it, but after a while the words just went into my eyes and bounced off my feeble brain.
Every new member should read this before doing anything else:
User avatar
bearriver
Site Donor
Site Donor
Posts: 4442
Joined: Fri Nov 22, 2013 10:17 pm
Location: Western Washington

Re: Oak and whiskey

Post by bearriver »

Gives me a few hours worth of words to research... :thumbup:
ShineRunnah
Swill Maker
Posts: 313
Joined: Tue Nov 04, 2014 11:44 pm

Re: Oak and whiskey

Post by ShineRunnah »

Good read. Tells me I need to go talk to my lumber supplier and get him to source me some European oak from a few different areas. Time for some experimentation!

Been thinking about a sherry cask for some time now, as I'm kinda addicted to Scotch. A friend of a friend owns a winery, I think its time to go for a visit...
User avatar
jedneck
Site Donor
Site Donor
Posts: 3769
Joined: Thu Jan 10, 2013 5:16 pm
Location: drive to the sticks, hang a right past the sticks amd go a couple more miles.

Re: Oak and whiskey

Post by jedneck »

Excellent read, anybody got a link to a good dictionary.
welcome aboard some of us are ornery old coots but if you do a lot of
reading and don't ask stupid questions you'll be alright most are
big help
Dunder
User avatar
bearriver
Site Donor
Site Donor
Posts: 4442
Joined: Fri Nov 22, 2013 10:17 pm
Location: Western Washington

Re: Oak and whiskey

Post by bearriver »

Wikipedia is what I'm using to decode the article.

Control + C = Copy
Control + V = Paste
User avatar
thecroweater
retired
Posts: 6079
Joined: Wed Mar 14, 2012 9:04 am
Location: Central Highlands Vic. Australia

Re: Oak and whiskey

Post by thecroweater »

I love the whisky science blog, read it often, they have had some very interesting blogs of late that i would like to touch on down the track a bit :thumbup:
Those who would give up essential Liberty, to purchase a little temporary Safety, deserve neither Liberty nor Safety. Benjamin Franklin
User avatar
DAD300
Master of Distillation
Posts: 2839
Joined: Wed Mar 02, 2011 11:46 am
Location: Southern U.S.

Re: Oak and whiskey

Post by DAD300 »

Nice article...but...

Basically different woods, methods of making the barrel, toasts and chars give different taste notes to the final aged product!
CCVM http://homedistiller.org/forum/viewtopi ... d#p7104768" onclick="window.open(this.href);return false;" rel="nofollow
Ethyl Carbamate Docs viewtopic.php?f=6&t=55219&p=7309262&hil ... e#p7309262
DSP-AR-20005
User avatar
Da Yooper
Swill Maker
Posts: 390
Joined: Thu Feb 14, 2013 10:20 pm

Re: Oak and whiskey

Post by Da Yooper »

WOW :crazy: ^^^^^^^well said DAD^^^^^^that makes more sence
Fail to plan == plan to fail
User avatar
corene1
HD Distilling Goddess
Posts: 3045
Joined: Tue Jan 08, 2013 8:05 pm
Location: The western Valley

Re: Oak and whiskey

Post by corene1 »

I stumbled across this as I was looking for answers to a previous post about a 4 week old whisky that had gotten hotter instead of smoother after the oak was put into the jar. I did find the answer in this article . I know that different toasting times and temps do make a difference in the flavor profiles of a whiskey as well as the depth and severity of the char. I just like to know why it happens so I can make subtle changes to the flavor of my whiskies. There are tons of links to other interesting distilling processes also. One interesting one is the different distilling temperatures that render out different phenols into the spirit and where they come across in the run. These too can change the flavor profile of a whiskey.
User avatar
T-Pee
Site Donor
Site Donor
Posts: 4355
Joined: Mon Feb 18, 2013 9:20 pm
Location: The wilds of rural California

Re: Oak and whiskey

Post by T-Pee »

Funny you should post this, Corene. I had a bit of an eye-opener recently myself: http://homedistiller.org/forum/viewtopi ... =4&t=50348

tp
MDH
Distiller
Posts: 1001
Joined: Tue Nov 29, 2011 4:33 pm
Location: Pacific Northwest

Re: Oak and whiskey

Post by MDH »

WhiskyScience is an excellent blog, a good summary of research. I recommend reading the posts on copper and sulfur.
The still is not a liar. Mash and ferment quality is 99.9% of your performance.
User avatar
DAD300
Master of Distillation
Posts: 2839
Joined: Wed Mar 02, 2011 11:46 am
Location: Southern U.S.

Re: Oak and whiskey

Post by DAD300 »

I love that chart...
Oak toasting chart.jpg
Oak toasting chart.jpg (14.66 KiB) Viewed 28320 times
I do sticks and chips in glass jugs.

Now, I'm trying to figure out the affects of charring after toasting. Charring has been far harder to figure out than toasting.

My take so far, has been to toast all sticks around 440F and char half.
CCVM http://homedistiller.org/forum/viewtopi ... d#p7104768" onclick="window.open(this.href);return false;" rel="nofollow
Ethyl Carbamate Docs viewtopic.php?f=6&t=55219&p=7309262&hil ... e#p7309262
DSP-AR-20005
MDH
Distiller
Posts: 1001
Joined: Tue Nov 29, 2011 4:33 pm
Location: Pacific Northwest

Re: Oak and whiskey

Post by MDH »

For truly authentic, complex whisky, you want a little bit of everything, including some raw.
The still is not a liar. Mash and ferment quality is 99.9% of your performance.
User avatar
DAD300
Master of Distillation
Posts: 2839
Joined: Wed Mar 02, 2011 11:46 am
Location: Southern U.S.

Re: Oak and whiskey

Post by DAD300 »

MDH...that's very profound...the outside of a barrel isn't toasted or charred. Jeezzz...now I have to try raw wood.
CCVM http://homedistiller.org/forum/viewtopi ... d#p7104768" onclick="window.open(this.href);return false;" rel="nofollow
Ethyl Carbamate Docs viewtopic.php?f=6&t=55219&p=7309262&hil ... e#p7309262
DSP-AR-20005
User avatar
jedneck
Site Donor
Site Donor
Posts: 3769
Joined: Thu Jan 10, 2013 5:16 pm
Location: drive to the sticks, hang a right past the sticks amd go a couple more miles.

Re: Oak and whiskey

Post by jedneck »

I use 2x2x6 inch blocks that are chard no toast. I find that it gives a more complex flavour to my untrained palate.
welcome aboard some of us are ornery old coots but if you do a lot of
reading and don't ask stupid questions you'll be alright most are
big help
Dunder
User avatar
MichiganCornhusker
retired
Posts: 4527
Joined: Mon Jun 23, 2014 9:24 am

Re: Oak and whiskey

Post by MichiganCornhusker »

DAD300 wrote:MDH...that's very profound...the outside of a barrel isn't toasted or charred. Jeezzz...now I have to try raw wood.
Was just thinking about that a few days ago when I picked up a 5 gallon barrel. Anyone know how they toast a barrel, but only on the inside? I'm thinking about taking the barrel apart to clean it up, (inspired by RandyMarshCT) and toasting the staves in the oven at 380 for a few hours before reassembling. Would be a darker barrel then.
Shouting and shooting, I can't let them catch me...
User avatar
DAD300
Master of Distillation
Posts: 2839
Joined: Wed Mar 02, 2011 11:46 am
Location: Southern U.S.

Re: Oak and whiskey

Post by DAD300 »

I have three little barrels...I keep thinking about what it would be to take them apart and get them back together.
CCVM http://homedistiller.org/forum/viewtopi ... d#p7104768" onclick="window.open(this.href);return false;" rel="nofollow
Ethyl Carbamate Docs viewtopic.php?f=6&t=55219&p=7309262&hil ... e#p7309262
DSP-AR-20005
User avatar
MichiganCornhusker
retired
Posts: 4527
Joined: Mon Jun 23, 2014 9:24 am

Re: Oak and whiskey

Post by MichiganCornhusker »

DAD300 wrote:I have three little barrels...I keep thinking about what it would be to take them apart and get them back together.
No sweat: http://homedistiller.org/forum/viewtopi ... =4&t=52710
Shouting and shooting, I can't let them catch me...
MDH
Distiller
Posts: 1001
Joined: Tue Nov 29, 2011 4:33 pm
Location: Pacific Northwest

Re: Oak and whiskey

Post by MDH »

DAD300 wrote:MDH...that's very profound...the outside of a barrel isn't toasted or charred. Jeezzz...now I have to try raw wood.
'Generally speaking the cooperages don't make a perfectly even toast because they're using open flame. Once the spirit passes through the charred layer, it hits the more caramelly toasted woods, then a small amount into less toasted, more raw wood. The general makeup of what the Whisky is exposed to, I think, would be charred and some toasted, with only a bit of raw.
The still is not a liar. Mash and ferment quality is 99.9% of your performance.
ShineRunnah
Swill Maker
Posts: 313
Joined: Tue Nov 04, 2014 11:44 pm

Re: Oak and whiskey

Post by ShineRunnah »

You may be using raw oak without even knowing it. Try cutting some of your charred/toasted sticks in half to see what the center looks like.

Think of it like cooking a steak. High heat for a short time will give you exterior char, some internal toast and a center that is nearly raw.
User avatar
MichiganCornhusker
retired
Posts: 4527
Joined: Mon Jun 23, 2014 9:24 am

Re: Oak and whiskey

Post by MichiganCornhusker »

ShineRunnah wrote:You may be using raw oak without even knowing it. Try cutting some of your charred/toasted sticks in half to see what the center looks like.
Done it. I was surprised that the toasting seemed to happen evenly throughout the stick right from the beginning.
Here is a pic showing a stick that was toasted and charred next to one that was just charred. The charring does very little beyond the surface. I have been really happy with the toast/char combo.
Toast no Toast.jpg
Here is a stick toasted for 80 min:
Toasted 80.jpg
Shouting and shooting, I can't let them catch me...
Chucker
Swill Maker
Posts: 190
Joined: Thu Apr 24, 2014 11:05 am

Re: Oak and whiskey

Post by Chucker »

I've been searching for info on the board concerning aging and there is a ton of great stuff here but a couple of things really stand out; a) A lot of this is very personal and subjective, and, b) There seem to be more differences than similarities in preferences and techniques. I would say that most comments seem to be geared toward non-barrel methods since glass seems to me much more accessible. Within those comments and even among the differences there is probably more commonality to the physics than seems evident within the individual method.
The root of my question line has had more to do with time than anything and how to more readily discern when desirable flavors have peaked and more specifically when enough is enough.
I use gallon jugs and finger sized sticks of charred white oak. I used to simply blast and stir a small pile with a blowtorch but have more recently switched to a small screen basket held over flame, shaking and stirring to get some even and deeper char until they all start catching fire quickly. All are then quenched and rinsed in a bucket of water to rinse off loose ash. As another post notes I concur that this invokes some degree of toasting, varying degrees of char, and some raw wood interior. All of this varies with stick size and the amount of direct flame contact they've had.
The imparted color, aroma, and flavor has been impressive. My ratio has been arbitrary and based on the jug size more than anything; I just try for a single layer to float in about 3 liters of 55-60%. I'd really like to hear more about what others here have perceived as under/over-oak flavors, or for that matter what constitutes excellence.
My washes have been based on brown sugar and corn after beginning with oats. The corn tastes better and next season will incorporate more corn. I use an adapted CM head on a gas fired 10 gal kettle. My best results so far have been to do a stripping run as a pot still and then a finishing run with reflux to a composite of 160 proof. Learning all of the time and especially from this site.
Would really welcome input/comments/further questions.
User avatar
culvercreek
Novice
Posts: 69
Joined: Tue Apr 29, 2014 9:05 am

Re: Oak and whiskey

Post by culvercreek »

Interesting read. I have seen a lot of stick pictures posted on the site and most of them have very little exposed end grain. When I was toasting and charring my sticks I opted for the more crosscut in forming the sticks rather that ripping the wood. It made sense to me since this allows more access to the grain of the wood, since wood is basically bundles of tubes. My thought process was more contact area. Have any of you noticed a difference the direction of cuts make in your process?
Democracy is two wolves and a lamb voting on what to have for lunch. Liberty is a well-armed lamb contesting the vote. Benjamin Franklin

The trouble with Socialism is, sooner or later you run out of other people's money- Margaret Thatcher
User avatar
corene1
HD Distilling Goddess
Posts: 3045
Joined: Tue Jan 08, 2013 8:05 pm
Location: The western Valley

Re: Oak and whiskey

Post by corene1 »

culvercreek wrote:Interesting read. I have seen a lot of stick pictures posted on the site and most of them have very little exposed end grain. When I was toasting and charring my sticks I opted for the more crosscut in forming the sticks rather that ripping the wood. It made sense to me since this allows more access to the grain of the wood, since wood is basically bundles of tubes. My thought process was more contact area. Have any of you noticed a difference the direction of cuts make in your process?
]

Absolutely! The more end grain that is exposed the faster the wood will transmit flavors into the white whiskey. This will also cause over oaking very quickly.
pulsetech
Site Donor
Site Donor
Posts: 178
Joined: Thu Aug 14, 2014 8:26 pm
Location: Melbourne Australia

Re: Oak and whiskey

Post by pulsetech »

Isn't end grain avoided because of the tanins ? A barrel has very little if any and grain exposure. I like my staves long and thin . 1/2 x 1/2 x 6 seems to be a nice size. I have stoped toasting and gone for exterior char only just like a barrel would be. Not saying I'm right or anyone else is wrong just another way to get it done
chris8sirhc
Novice
Posts: 50
Joined: Fri Feb 13, 2015 7:07 pm

Re: Oak and whiskey

Post by chris8sirhc »

pulsetech wrote:Isn't end grain avoided because of the tanins ? A barrel has very little if any and grain exposure. I like my staves long and thin . 1/2 x 1/2 x 6 seems to be a nice size. I have stoped toasting and gone for exterior char only just like a barrel would be. Not saying I'm right or anyone else is wrong just another way to get it done
yup, end grain imparts a "brown paper bag" flavor compared to side grain.
ipee7ABV
Rumrunner
Posts: 623
Joined: Fri Jan 06, 2012 9:01 pm
Location: chain o lakes

Re: Oak and whiskey

Post by ipee7ABV »

pulsetech wrote:Isn't end grain avoided because of the tanins ? A barrel has very little if any and grain exposure. I like my staves long and thin . 1/2 x 1/2 x 6 seems to be a nice size. I have stoped toasting and gone for exterior char only just like a barrel would be. Not saying I'm right or anyone else is wrong just another way to get it done
I still have a lot to learn but if you think about it the staves are just end grain split.
User avatar
Bobdoe
Bootlegger
Posts: 141
Joined: Tue Mar 24, 2015 11:47 am

Re: Oak and whiskey

Post by Bobdoe »

I hope this question is on-topic. Bear with me here: I enjoy a nice cigar now and then and I can taste a definite difference when I light a cigar off a lighter vs one lit with a piece of burning wood.

So, is charring a piece of wood with a torch going to give different flavors to a drink compared to a piece of oak or other wood that is charred with wood flame?

Bobdoe
The Bluegrass Biochemist - Converting malted corn mash using salivary amylase from the spit of Kentucky virgins
Post Reply