I started some research on a bane-marie/steam jacket pot for stripping, and avoiding scorch. Does anyone have experience with this Oakstills model, or something similar? https://oakstills.com/products/100l-cop ... bain-marie
The jacket is rated at 7.25psi (0.05MPa ), and comes with a 4.25psi (.03MPa) PRV
so my question is, is 4.25 enough pressure to generate high enough temperature for the 26 gallon boiler? From the reading I did, it sounds like you want closer to 1 bar, or around 14psi.
oakstills bain-marie
Moderator: Site Moderator
-
The Booze Pipe
- Trainee
- Posts: 791
- Joined: Wed Aug 19, 2015 5:00 pm
- Location: PNW
oakstills bain-marie
13.5g/50L keg
modular 3" pot/VM copper&stainless w/offset gin head
26g jacketed 4" stripping still
12,000watts of fury
modular 3" pot/VM copper&stainless w/offset gin head
26g jacketed 4" stripping still
12,000watts of fury