New Keg Build
Moderator: Site Moderator
-
Sailman
- Rumrunner
- Posts: 552
- Joined: Wed Aug 21, 2019 7:02 am
New Keg Build
I posted some of this before but I feel like this still deserves its own post. I've had this keg for some time and I just recently got started putting it together. One thing that I had to have with this keg was a large opening for the top. I decided to go with a six inch so I could put different size columns on the top via reducers. I wanted an opening to be able to fill the boiler, so what I found that would fit was a 3 inch. For the bottom I went with a one inch drain. For the side i'm gonna do at least one 2 inch for the heating element.
You do not have the required permissions to view the files attached to this post.