Difference between revisions of "Yeast"

From Distillers Wiki
Jump to: navigation, search
(moved some links around, added some others.)
(External Links: added link)
Line 49: Line 49:
*[http://www.yeastgenome.org/VL-yeast.html All About Yeast]
*[http://www.yeastgenome.org/VL-yeast.html All About Yeast]
*[http://www.whitelabs.com/ White Labs Yeast Company]
*[http://www.whitelabs.com/ White Labs Yeast Company]
*[http://www.mrmalty.com/starter_faq.php Mr Malty Yeast Starter FAQs]

Revision as of 11:57, 1 February 2018

Saccharomyces cerevisiae


Yeast a single celled organism capable of fermenting carbohydrates and responsible for changing sugar to alcohol in the fermentation process.

The most common yeast used in alcohol production is Saccharomyces cerevisiae. According to The Alcohol Textbook this yeast has been used to produce 23.8% ABV in "batch fermentation with all carbohydrate provided at the start of fermentation." (Ingledew, p. 76.) There are several yeast strains available to suit virtually any type of beverage alcohol production.

There are several factors that can cause yeast distress.

Dry Yeast

Dry yeast should be rehydrated before use. This ensures viability.

  1. Put 1 cup of warm (95-105F, 35-40C) boiled water into a sanitized jar and stir in the yeast. Cover with Saran Wrap and wait 15 minutes.
  2. "Proof" the yeast by adding one teaspoon of extract or sugar that has been boiled in a small amount of water. Allow the sugar solution to cool before adding it to the jar.
  3. Cover and place in a warm area out of direct sunlight.
  4. After 30 minutes or so the yeast should be visibly churning and/or foaming, and is ready to pitch.

Liquid Yeast

Liquid yeast can be pitched without any preparation for smaller batches. "Smack Packs" contain yeast and nutrients and also can be pitched directly without extra preparation.

Yeast Starter

Yeast starter ready for pitching

A media in which yeast is activated and encouraged to multiply to a high density so that when added to a wash it will have a better chance of populating it successfully. It is also used to decrease fermentation time. By pitching more yeast it takes less time to fully ferment the wash and reduces the chance for infection. Above just rehydrating yeast, a Yeast starter is used to kick start fermentation. They are also used in larger batch processing as it is less expensive to create a starter than buy the correct amount of yeast.

Yeast Bomb

A Yeast Bomb is a mixture of extra nutrients to increase fermentation speed. The nutrients are not added until the yeast is pitched. The B vitamins increases the activity of the yeast. The yeast hulls and other ingredients prove nutrients needed for aggressive growth. This is added to the wash at the same time as the yeast is.

From the Pugirum thread:

2 vitamin B, crushed with mortar and pestle
5 teaspoons of 20-0-0, agricultural fertilizer
1/4 teaspoon of epsom salt
1/4 cup bakers yeast
1 gallon water
Boil all for 15 minutes and strain.

Creating a fruit based Yeast Starter

There are several ways to make a starter. To make a really vigorous starter for inoculating a must initially or restarting a stuck fermentation, in a quart jar dissolve 1 teaspoon of sugar and 1/8 teaspoon of yeast nutrient in 1 cup of warm water (less than 104°F.). To this, add 1/4 cup of the juice from the must to be fermented. Sprinkle 1 packet of active dry yeast on the surface of the liquid. Do not stir. Cover the jar with a paper towel or napkin held in place with a rubber band. Wait for the yeast to become active. This could become obvious in as little as 15 minutes or could take as long as 2-4 hours. If no evidence of activation in 4 hours, the yeast was too old or dead from exposure to temperature extremes (usually heat, but possibly extreme cold). In such a case, sprinkle another packet of yeast into same jar and recover. When yeast (first or second sachet) is evidently active, add another 1/4 cup of juice from the must and recover.

Wait until vigorous activity returns (usually 30-90 minutes) and add another 1/4 cup of juice. When again vigorously active, add yet another 1/4 cup of juice. Wait 1-2 hours and gently pour half the liquid over the surface of the must. Do not stir. The idea is for the starter to remain on or close to the surface where there is plenty of air for the yeast to "breath." Cover the primary fermentation vessel with a sanitized cloth or sheet of plastic. After 2-4 hours, the surface of the must should have small bubbles rising from fermentation or a healthy layer of yeast culture. Stir shallowly and recover the primary. Wait another 2-4 hours and fermentation should be more vigorous. Add the remainder of the starter and stir deeply. Recover primary. If the starter does not produce a vigorous fermentation in the primary, add another 1/4 cup of juice to the reserved half of the starter media. Wait 2 hours and add yet another 1/4 cup of juice. This starter is now 2 parts juice and 1 part water. When this is fermenting vigorously, add half of it to the must as before and try again.

HD Posts

External Links