Search found 233 matches
- Sat Jun 04, 2011 6:31 pm
- Forum: Column Builds
- Topic: Using a swept tee in 2" VM - any effect?
- Replies: 1
- Views: 729
Re: Using a swept tee in 2" VM - any effect?
Put the sweep on the bottom, you have a valve to control flow anyway so it's no biggie if it lets too much through
- Thu Jun 02, 2011 11:10 pm
- Forum: Column Builds
- Topic: 3" Bok?
- Replies: 2
- Views: 715
Re: 3" Bok?
Double helix != double wound
You could do it in 3/8" in 3". I'd go for 5/16" at least. Stuff it with mesh (cause why not). At 9" it should be sweet though
You could do it in 3/8" in 3". I'd go for 5/16" at least. Stuff it with mesh (cause why not). At 9" it should be sweet though
- Sun May 29, 2011 7:06 pm
- Forum: Still Related Hardware
- Topic: Brass Valves
- Replies: 12
- Views: 2946
Re: Brass Valves
Why do you need a return to column valve as well as a take off valve? Is it so you got like RLM and LM?
- Fri May 27, 2011 7:20 pm
- Forum: The Construction Site
- Topic: and still yet another 2" Bok...
- Replies: 13
- Views: 3117
Re: and still yet another 2" Bok...
I have spirals of 1.6mm tig wire inside all 5 of the tubes in my shotgun. It's an overkill piece of equipment anyway so its hard to say.. but nothing gets out, thats for sure
- Fri May 27, 2011 7:17 pm
- Forum: Column Builds
- Topic: Custom VM 'seagull' tee for flow direction
- Replies: 8
- Views: 11778
Re: Custom VM 'seagull' tee for flow direction
I ended up using head pressure, rather than flow direction. This T is sitting around in a bag as it has been since we welded it up Maybe I'll do something with it this weekend, would be interesting!
- Wed May 25, 2011 3:33 pm
- Forum: Column Builds
- Topic: Reflux return point
- Replies: 32
- Views: 2468
Re: Reflux return point
Lol. Prairiepiss has a good point, hadn't even thought of that. Some sort of catching condensate-catching device (ie slant-plate or bubble plate) will be required to direct the reflux. If you have that you may as well smash a valve on and have a LM/VM combo. Or at least a plugged take-off so you can...
- Wed May 25, 2011 3:15 pm
- Forum: Column Builds
- Topic: Reflux return point
- Replies: 32
- Views: 2468
Re: Reflux return point
LW - could be way off base here but - that's at the bottom of the column based on the excerpt?
What about half way up? That leaves you half-way between the two methods.. seems like it would be problematic to me?
I'm probably wrong though.. I'm okay with it!
What about half way up? That leaves you half-way between the two methods.. seems like it would be problematic to me?
I'm probably wrong though.. I'm okay with it!
- Wed May 25, 2011 2:18 pm
- Forum: Column Builds
- Topic: Reflux return point
- Replies: 32
- Views: 2468
Re: Reflux return point
What thread prairiepiss?
You want your return below your VM take-off ideally.. but not half-way down the packing o_o
On top, to be sure.
You want your return below your VM take-off ideally.. but not half-way down the packing o_o
On top, to be sure.
- Wed May 25, 2011 12:57 pm
- Forum: The Construction Site
- Topic: Old Dog's Stumpy Still
- Replies: 8
- Views: 6237
Re: Old Dog's Stumpy Still
Where's that thermo from?
- Tue May 24, 2011 2:53 pm
- Forum: Column Builds
- Topic: New Take on a Great Design... ODs Magic Flute - Mark 2...
- Replies: 490
- Views: 84433
Re: New Take on a Great Design... ODs Magic Flute - Mark 2.
Real?
The top plate give different results?
Isn't it just vapor path - plate - vapor path - dephlegmator, no matter which way you do it?
I'm just talkin shit here but - I don't see how this would be the case? Maybe a very small difference but surely not by much?
The top plate give different results?
Isn't it just vapor path - plate - vapor path - dephlegmator, no matter which way you do it?
I'm just talkin shit here but - I don't see how this would be the case? Maybe a very small difference but surely not by much?
- Tue May 24, 2011 1:12 am
- Forum: Column Builds
- Topic: help with 3 inch stainless VM-LM design
- Replies: 10
- Views: 2164
Re: help with 3 inch stainless VM-LM design
So ethanol vapor is heavier than air. Therefore, the greater the distance between your take-off and coil condenser, the greater the weight of the ethanol pushing down on the take-off. Basically, if the distance is bigger, you can have a smaller take-off arm and achieve the same rate. Think about it ...
- Sat May 21, 2011 1:49 pm
- Forum: Column Builds
- Topic: Centering Rings
- Replies: 3
- Views: 1240
Re: Centering Rings
Cut them off at like 40mm ID I reckon. 1" is getting pretty small. But primo!
- Thu May 19, 2011 10:03 pm
- Forum: Column Builds
- Topic: Dan's Flute x2, 4" x 5 plate 42" column
- Replies: 444
- Views: 170686
Re: Dan's Flute x2, 4" x 5 plate 42" column
How'd you get em cut?
- Thu May 19, 2011 7:14 pm
- Forum: Column Builds
- Topic: 60" column
- Replies: 24
- Views: 2600
Re: 60" column
If your column isn't too narrow at any point, and your still doesn't leak, it will probably work.. don't get too caught up in exact dimensions, I am slowly coming around (a little ) to rad's way of thinking in some departments.. just build it ..
- Thu May 19, 2011 7:07 pm
- Forum: Column Builds
- Topic: help with 3 inch stainless VM-LM design
- Replies: 10
- Views: 2164
Re: help with 3 inch stainless VM-LM design
I want to start building my first still, and would love any advice, suggestions, concerns etc. This might look a little extreme for a first build but I figure it might as well also be my last. My logic is there’s no point fucking around. I want to make a 3 inch vm/lm combo. The build will be all st...
- Wed May 18, 2011 3:37 pm
- Forum: The Construction Site
- Topic: Tom . CHCH New Zealand . Stainless fractioning
- Replies: 9
- Views: 2041
Re: Tom . CHCH New Zealand . Stainless fractioning
I'm in ChCh too, you got that WPOSW on yet?
- Mon May 09, 2011 2:36 pm
- Forum: Still Related Hardware
- Topic: Sight glass - what kind of glass?
- Replies: 1
- Views: 660
Sight glass - what kind of glass?
Am spending the day whipping up the prototype for some nice tri-clamp sight glass units I'm gonna be selling.. I got a quote for the glass disc component for $1.00 each. When I mentioned it needed to withstand about 100 degrees the guy said I'd need Robax, and it would cost 5$ each.. what kind of gl...
- Fri May 06, 2011 11:11 am
- Forum: Drinks and Drinking
- Topic: Anybody like red eyes ?
- Replies: 16
- Views: 2735
Re: Anybody like red eyes ?
Yes THM, I have read, and understood, the rules.
Think I'll stay away from anywhere except the commercial links section in the future.
Think I'll stay away from anywhere except the commercial links section in the future.
- Fri May 06, 2011 1:46 am
- Forum: The Construction Site
- Topic: Hybrid monster
- Replies: 24
- Views: 4590
Re: Hybrid monster
Christchurch bro. Spend a fair bit of time in akl one way n another though.
You ever wanna take ya stilling to the next level and get a ss VM or LM.. look me up
You ever wanna take ya stilling to the next level and get a ss VM or LM.. look me up
- Thu May 05, 2011 11:25 pm
- Forum: Drinks and Drinking
- Topic: Anybody like red eyes ?
- Replies: 16
- Views: 2735
Re: Anybody like red eyes ?
Man, pretty heavy.. just a wee joke as far as I can see?
No need to go coming down heavy.. Nobody's posting detailed instructions on the synthesis of methamphetamine..
That sorta stuff can kill the mood quick!
No need to go coming down heavy.. Nobody's posting detailed instructions on the synthesis of methamphetamine..
That sorta stuff can kill the mood quick!
- Thu May 05, 2011 11:20 pm
- Forum: The Construction Site
- Topic: Hybrid monster
- Replies: 24
- Views: 4590
Re: Hybrid monster
Don't stress it too much buddy, I'm with you on this one. Plus.. I put so much other shit into my body.. a bit of plastic would have to be one of the safer things
You in NZ?
You in NZ?
- Wed May 04, 2011 10:55 pm
- Forum: Off-Topic Discussion
- Topic: Sick old man
- Replies: 57
- Views: 4239
Re: Sick old man
Yeah, who cares.. I thought you were all old buggers except for us sprightly young NZers
- Wed May 04, 2011 2:47 am
- Forum: The Construction Site
- Topic: Hybrid monster
- Replies: 24
- Views: 4590
Re: Hybrid monster
Boy you spent some dollars on them..
What was your starting %?
What was your starting %?
- Mon May 02, 2011 8:47 pm
- Forum: My First .....
- Topic: MY FIRST WINEOS PLAIN OLD SUGAR WASH
- Replies: 11
- Views: 1638
Re: MY FIRST WINEOS PLAIN OLD SUGAR WASH
Hey buddy. With a valved reflux and WPOSW I guess you made yourself some neutral. No blending to do there really - you wanna take the hearts cut and that's it (for me, anyways. Guess I just wanna drink without tasting anything usually :P) As for finishing and aging: You could run it through some car...
- Mon May 02, 2011 11:45 am
- Forum: Off-Topic Discussion
- Topic: Bin Laden killed in secret raid
- Replies: 56
- Views: 4496
Re: Bin Laden killed in secret raid
They showed us the pic on our 6 o'clock news. Hope I don't get banned for this, it's pretty rough :D http://2.bp.blogspot.com/-tpnrTZSgs5Y/Tb6LDyOaWII/AAAAAAAAB-s/XYntx88Kw-8/s320/osama%2Bkilled.jpg ONE - NIL! PS Couldn't find the high res version sorry chaps. The one I saw on the news was a much mo...
- Mon May 02, 2011 11:39 am
- Forum: Off-Topic Discussion
- Topic: Bin Laden killed in secret raid
- Replies: 56
- Views: 4496
Re: Bin Laden killed in secret raid
Come on guys, be serious for a minute. How do you think it would affect Obama's election chances if bin Laden released a video of himself tomorrow, still alive and kicking? There is no way Obama would go on TV like that and risk everything, unless he were pretty damn confident he were telling the tr...
- Sun May 01, 2011 12:32 pm
- Forum: Off-Topic Discussion
- Topic: Tornados
- Replies: 14
- Views: 1057
Re: Tornados
Thoughts and prayers.
- Wed Apr 27, 2011 10:47 am
- Forum: Column Builds
- Topic: New Take on a Great Design... ODs Magic Flute - Mark 2...
- Replies: 490
- Views: 84433
Re: New Take on a Great Design... ODs Magic Flute - Mark 2.
Your neutral tree may as well just be a bunch of packing for the column.. just my take on it..
- Wed Apr 27, 2011 10:45 am
- Forum: Column Builds
- Topic: LM/VM Bev Nap Sketch
- Replies: 6
- Views: 1043
Re: LM/VM Bev Nap Sketch
ok here is updated sketch. I realized when I was looking at that condenser the cool input is on the opposite side so I switched the liebig to the other side. Which I actuall prefer because I want to orient the knob to the gate valve 45 degrees so it is easier to turn when this thing is 6-7 feet in ...
- Mon Apr 25, 2011 9:24 pm
- Forum: Column Builds
- Topic: Curved plate design on a LM reflux still
- Replies: 24
- Views: 2592
Re: Curved plate design on a LM reflux still
I gotta agree with everyone else.. sure does look cool.. until it's inside your still and you can't see it no more