Home Distiller

im deferentially going to try playing with this i have some old car rims lying rwd from partners ex and they were going to the tip till i layed clame to them now going to attempt some different ideas see Wat works the best

thanks didnt need like a full description that a great help thamkyou

I think, if anything, Ill reinforce the existing burner and place it on some cement stepping stones to give extra clearance beneath it. Due to proximity of landlord, im forced to use this apparatus in my sun porch with a wooden floor. extreme care shall be taken personally i would weld a few legs o...

im not entirely sur if this would work but a hot water cilender might work and they r mostly mad of copper and u can get them around 30 L well smallest ones i know of feel free to blast me guys if im wrong

I used to go to Wyoming in the summers and work a cattle ranch so I made one up and sent to my buddys out there to heat branding irons quick. Well they showed it round and I ended up making about 20 more for them to sell. Made em up out of scrap pipe and cut the flares out of a SS panel from some o...

thanks can i get the gas usage of that burner pleese as i guide

well if ya got quite a few, might as well turn some of them into fermenters...i got around 11-15 kegs. figurin' on bout a half dozen for my stills/brewing setup, leaving me with a few for fermenters. especially since i can fermenter 10-12 gallons in one, then siphon it directly into my boiler of th...

i am looking at gas burners their is doable ring ones at now bare with me 320 grams per hour or this 3X burner with more outlets for the flame at 67 mega jewels now i don't know the equivalent of a mega jewels but was hoping one of the guys hear could help me figure out if that would b sufficient to...

As requested , http://i153.photobucket.com/albums/s239/johnhoe/IMG_2044.jpg http://i153.photobucket.com/albums/s239/johnhoe/IMG_2043.jpg http://i153.photobucket.com/albums/s239/johnhoe/IMG_2042.jpg http://i153.photobucket.com/albums/s239/johnhoe/IMG_2041.jpg will this burner heat a 50L keg? looks k...

Here is a simple guide to removing sankey keg valves. Step 1: You must depressurise the keg first . Depressurize the keg by pushing down on the ball in the center of the valve. This can get messy, especially if there is any beer in the keg, and it takes a bit of pressure so I did not take a pic. Li...

After much reading I think I will build one of Harry's design still heads. It looks excellent. One issue for me is cooling water supply is rain water and LIMITED, so an efficient recycling system is necessary. Space is a problem so it cannot be too big, large garbage bin is ideal. I can either use ...

i need to know will i have to upscale this for a 50L beer keg or will it b fine on that scale and how would i go about connecting if possible can someone email me the design to a still like this or a link so i can look at constructing it
p.s does it have a reflux capacity