Search found 27 matches

by emiliokiedoke
Wed Jan 04, 2012 6:14 pm
Forum: My First .....
Topic: sleaved parrot blues
Replies: 8
Views: 935

Re: sleaved parrot blues

IMG_1162.JPG
by emiliokiedoke
Wed Jan 04, 2012 6:13 pm
Forum: My First .....
Topic: sleaved parrot blues
Replies: 8
Views: 935

Re: sleaved parrot blues

IMG_1161.JPG
by emiliokiedoke
Wed Jan 04, 2012 6:12 pm
Forum: My First .....
Topic: sleaved parrot blues
Replies: 8
Views: 935

Re: sleaved parrot blues

IMG_1160.JPG
by emiliokiedoke
Wed Jan 04, 2012 6:05 pm
Forum: My First .....
Topic: sleaved parrot blues
Replies: 8
Views: 935

Re: sleaved parrot blues

it's sleaved with a liebig so i could cool the distilate to a temp to where i wouldn't have to use a temperature conversion chart to read my hydrometer. i'll try and post pics right now
by emiliokiedoke
Wed Jan 04, 2012 11:10 am
Forum: My First .....
Topic: sleaved parrot blues
Replies: 8
Views: 935

sleaved parrot blues

well i tried and i tried... i have built a 3" bok and tried to incorporate a sleaved parrots beak attached to the collum but cant get the little f****r to stop leaking so i guess i'm going to have to scrap the idea for now as its delaying my first runs. this post probably doesn't belong here bu...
by emiliokiedoke
Sun Sep 25, 2011 4:47 pm
Forum: Novice Distillers
Topic: cleaning plastic fermenting barrell
Replies: 7
Views: 622

Re: cleaning plastic fermenting barrell

thank you for all the help. i was going to use the barrell for a rice ferment, (sake and U.R.R.V.) i think i might try a vodka soaked towel? then just run with it
by emiliokiedoke
Sat Sep 24, 2011 6:00 pm
Forum: Novice Distillers
Topic: cleaning plastic fermenting barrell
Replies: 7
Views: 622

cleaning plastic fermenting barrell

i just bought a 40 gallon blue barrell from my local brew house. it's empty but had contained malt and there is a bit left in there. what is a safe way to remove the syrupy remnants? i was going to use this as my fermenter. thank you
by emiliokiedoke
Fri Sep 09, 2011 7:57 am
Forum: Still Related Hardware
Topic: needle valve composition
Replies: 3
Views: 690

Re: needle valve composition

thank you
by emiliokiedoke
Thu Sep 08, 2011 6:32 pm
Forum: Still Related Hardware
Topic: needle valve composition
Replies: 3
Views: 690

needle valve composition

hello all. in my search for ss needle valves i have found many of the stem tips are chrome plated stainless steel. is this acceptable? this is the one i already purchased for my take off and i am pretty sure it's all stainless http://catalog.hoke.com/Asset/2100_SERIE.pdf" onclick="window.o...
by emiliokiedoke
Thu Apr 07, 2011 12:41 pm
Forum: Novice Distillers
Topic: cultivating wild yeast
Replies: 7
Views: 686

Re: cultivating wild yeast

found it! http://purl.access.gpo.gov/GPO/LPS94139" onclick="window.open(this.href);return false;" rel="nofollow
by emiliokiedoke
Sun Mar 20, 2011 4:37 pm
Forum: Novice Distillers
Topic: copper needle valve
Replies: 3
Views: 1523

Re: copper needle valve

interesting. thank you sir
by emiliokiedoke
Sat Mar 19, 2011 11:17 pm
Forum: Novice Distillers
Topic: cultivating wild yeast
Replies: 7
Views: 686

Re: cultivating wild yeast

when i found it the first time it was when golden pond passed, rip. and i read that he was into wild yeast so i started reading his posts and it was a splinter off of one of those i think that someone else posted, i don't know, i can't find it anymore
by emiliokiedoke
Sat Mar 19, 2011 10:35 pm
Forum: Novice Distillers
Topic: cultivating wild yeast
Replies: 7
Views: 686

Re: cultivating wild yeast

sorry. i was trying to ask if anyone had the link
by emiliokiedoke
Sat Mar 19, 2011 11:48 am
Forum: Novice Distillers
Topic: cultivating wild yeast
Replies: 7
Views: 686

cultivating wild yeast

there is a link somewhere on this site that takes you to some "bio fuel.gov" type of site and it goes into extreme detail on cultivating wild yeast. i had the link written down but it has left me to somewheres unknown. thank you
by emiliokiedoke
Sat Mar 19, 2011 11:11 am
Forum: Novice Distillers
Topic: bok plate spacing
Replies: 4
Views: 428

Re: bok plate spacing

thank you samohon. 1" it is. with the bottom lip of the top plate being lower than the over flow lip on the bottom that shouldn't happen as long as i stick with the template and not increase the degree of my slots, correct? this is also to not restrict vapor flow?
by emiliokiedoke
Sat Mar 19, 2011 10:58 am
Forum: My First .....
Topic: 3" bok
Replies: 3
Views: 558

Re: 3" bok

pics will be up soon.
by emiliokiedoke
Sat Mar 19, 2011 9:36 am
Forum: Novice Distillers
Topic: bok plate spacing
Replies: 4
Views: 428

bok plate spacing

i've read on here that a lot of people prefer to keep their plates spaced at 5/8" on a two inch column i just printed up the template and it has them at 3/4" for a two inch. i have a three inch bok so i enlarged the template by 50% which brought the spacing to one inch. does the with of my...
by emiliokiedoke
Sat Mar 19, 2011 9:20 am
Forum: My First .....
Topic: 3" bok
Replies: 3
Views: 558

3" bok

getting real close, and getting real excited. it's a monster; 5 feet tall. haven't made the plates yet but my condencer is in so i should have room for 48" of packing. as my condencer is only 10 inches, double 3/8ths od with a finger. just sleaved my parrots beak for a liebig. so much for an ap...
by emiliokiedoke
Sat Mar 19, 2011 8:44 am
Forum: Novice Distillers
Topic: copper needle valve
Replies: 3
Views: 1523

copper needle valve

someday real soon i'm gonna have the old lady teach me how to bookmark. i can't find the copper needle valve thread. i don't wan't to mess with brass or stainless and i've read about plans for a copper needle valve but can't seem to locate them. thank you for your help
by emiliokiedoke
Sat Jan 08, 2011 3:18 pm
Forum: Novice Distillers
Topic: 3" bok?
Replies: 4
Views: 545

Re: 3" bok?

thank you austin
by emiliokiedoke
Sat Jan 01, 2011 10:12 am
Forum: Novice Distillers
Topic: 3" bok?
Replies: 4
Views: 545

Re: 3" bok?

cool thread, thank you. it really only compared the outputs of the 3" vm and 3" bok though. i was kinda lookin for the amount of time i would save runn1ng a 3" bok as appossed to a 2" bok. it seems it would be efficient if you just packed it enough. idk.
by emiliokiedoke
Sat Jan 01, 2011 4:45 am
Forum: Novice Distillers
Topic: 3" bok?
Replies: 4
Views: 545

3" bok?

i am about to start a build and i was wondering if anyone has built a 3" diameter bok. if so are you happy with it? does it cut down your run time? i was thinking between 48" and 57" including condencer column height with the two slant plates on 15.5 keg and propane. any thoughts? i j...
by emiliokiedoke
Tue Oct 12, 2010 8:05 am
Forum: Off-Topic Discussion
Topic: legal threat from Jack Daniels
Replies: 51
Views: 5989

Re: legal threat from Jack Daniels

i always liked jim beam better anyways
by emiliokiedoke
Sat Oct 09, 2010 8:29 pm
Forum: Column Builds
Topic: Twin Slant Plate the full still -- Liquorice Stick
Replies: 33
Views: 8930

Re: Twin Slant Plate the full still -- Liquorice Stick

maybe let the parrot perch 12 inc lower sling a lil weinie in the middle
by emiliokiedoke
Fri Oct 08, 2010 9:54 pm
Forum: Column Builds
Topic: Twin Slant Plate the full still -- Liquorice Stick
Replies: 33
Views: 8930

Re: Twin Slant Plate the full still -- Liquorice Stick

doesthe cold finger eliminate the need for a condencer on the take off?
by emiliokiedoke
Fri Oct 08, 2010 9:40 pm
Forum: Off-Topic Discussion
Topic: whats your music
Replies: 2752
Views: 332549

Re: whats your music

headache music!!!!
by emiliokiedoke
Thu Oct 07, 2010 5:50 pm
Forum: ** Welcome Center **
Topic: fng
Replies: 7
Views: 575

fng

how do, i'm so happy i found this site. i've been researching for about a month and thought i knew a little something... then i came here and almost shat myself. i've been creeping around this site for a few weeks and i now realize i know nothing. well, a hell of a lot more than i did before, yet a ...