I keep coming back to see this build
Used it as inspiration back in 2018 for my own built
Search found 24 matches
- Fri Sep 10, 2021 3:13 pm
- Forum: Column Builds
- Topic: 4th Triangle Flute Design & Build
- Replies: 189
- Views: 69826
- Thu Nov 14, 2019 5:50 am
- Forum: Beer, and Wine
- Topic: 85 Home Beers Down The Sink
- Replies: 15
- Views: 3603
Re: 85 Home Beers Down The Sink
I've made some really nice vodka from two - gallon batches of Ale, they were some of my first all grain batches. Ended up with buttery taste that I couldn't stand 🤮 6% wash at 12 gallons, stripped it, the ran through my Boka, collected everything from 94- 89% and dumped the rest :) I think i had a g...
- Sat Apr 13, 2019 9:31 pm
- Forum: Column Builds
- Topic: FLUTE TALK
- Replies: 1867
- Views: 203449
Re: FLUTE TALK
This is what I've built, 4 plates and packed section. Not all of it fit under ceiling in my basement (still too cold in garage) Gives me 95% if i run slower but @93-94% i can collect almost a gallon an hour :crazy: :crazy: Was doing an experiment, hooked up a DCV to output from dephleg to control te...
- Thu Oct 25, 2018 6:52 pm
- Forum: Column Builds
- Topic: FLUTE TALK
- Replies: 1867
- Views: 203449
Re: FLUTE TALK
Happy Belated 8th birthday to "FLUTE TALK" !
Reading you was tough and time consuming, but in the end it was well worth it!
Reading you was tough and time consuming, but in the end it was well worth it!
- Thu Oct 25, 2018 6:49 pm
- Forum: Column Builds
- Topic: 4th Triangle Flute Design & Build
- Replies: 189
- Views: 69826
Re: 4th Triangle Flute Design & Build
Beautiful built! that plumbing work is crazy
- Thu Feb 15, 2018 6:53 pm
- Forum: Column Builds
- Topic: flute or t500 for neutral?
- Replies: 6
- Views: 1907
Re: flute or t500 for neutral?
Its been some time now since original post but it seems to be close to what I am after :) How did you end up going about it ? I have 3"4plate flute and got a 21" piece i can fill with lava rock or ss scrubies Or i can add 4 more plates, i got a piece of copper sheet left that i can make an...
- Sun Jan 21, 2018 7:43 pm
- Forum: Pot Distillation/Thumper and Design
- Topic: New 3 inch Flute Build
- Replies: 23
- Views: 4034
Re: New 3 inch Flute Build
How did it all work out for you ? Care to share some picsltures ?
- Sun Jan 21, 2018 6:02 pm
- Forum: Column Builds
- Topic: Emptyglass flute build.
- Replies: 254
- Views: 32180
Re: Emptyglass flute build.
It's been few years since this was written but i just to say thank you Emptyglass
Im working on a 3" flute and reading this helped a lot
Im working on a 3" flute and reading this helped a lot
- Fri Jan 12, 2018 9:46 am
- Forum: The Construction Site
- Topic: Building an Alembic with Optional Offset Column Hybrid
- Replies: 44
- Views: 8396
Re: Building an Alembic with Optional Offset Column Hybrid
This looks amazing!
- Fri Jan 12, 2018 9:38 am
- Forum: The Construction Site
- Topic: Looking to build a 3 inch 5 Plate Still
- Replies: 118
- Views: 13547
Re: Looking to build a 3 inch 5 Plate Still
Toolman - what did you end up doing for your glass ?
I tried mcmaster too and yeah, still won't ship to personal accounts across the border
I tried mcmaster too and yeah, still won't ship to personal accounts across the border
- Wed Dec 27, 2017 8:31 pm
- Forum: Research and Theory
- Topic: Rerunning Feints
- Replies: 154
- Views: 87765
Re: Rerunning Feints
Thanks for quick responses :) I have it airing for 24 hours already, along with other stuff i ran, will give it another day get some good water and go through it again. One thing i forgot to mention, bought a absinthe essence and made a 1.75l bottle of it - i was garbage, tasted awful, so i put that...
- Wed Dec 27, 2017 2:30 pm
- Forum: Research and Theory
- Topic: Rerunning Feints
- Replies: 154
- Views: 87765
Re: Rerunning Feints
Have to ask a question, my head is about to explode with all the treads i've read in past 24 hours about Feints Runs I've been collecting low wines from runs for a couple of months, I tried 9 most viewed recipes in "Tried and true recipe book" ( :crazy: :crazy: :crazy: :crazy: ) Everything...
- Thu Nov 23, 2017 4:15 am
- Forum: Boilers
- Topic: Guinness keg
- Replies: 17
- Views: 3909
Re: Guinness keg
Hello!
Did you get it all finished ?
Can you share some pictures?
I am in preparing stage of turning keg into boiler and any ideas help
Did you get it all finished ?
Can you share some pictures?
I am in preparing stage of turning keg into boiler and any ideas help
- Tue Nov 21, 2017 8:52 pm
- Forum: Related Electric Accessories
- Topic: 10,000w SCR vs SSR
- Replies: 195
- Views: 31480
Re: 10,000w SCR vs SSR
Just placed order for: 10000W SCR Digital Voltage Regulator Module Board Speed Control Dimmer Thermostat AC 220V 80A Dernord 2 Inch (OD64) Tri-clamp Ripple Heating Element Electric Water Heater 5500W 240V On ama zon .ca prime, at least if it is wrong stuff return is free :) :wink: I have nice box an...
- Thu Nov 16, 2017 8:22 pm
- Forum: Column Builds
- Topic: Dan's Flute x2, 4" x 5 plate 42" column
- Replies: 444
- Views: 157627
Re: Dan's Flute x2, 4" x 5 plate 42" column
Finally got to the last page! took me days to go through, very informative. Thank you Dan! Will be building 3" 5 plate, since copper is very expensive in my area and 4" in nearly non existent and 3"x36" pipe my neighbour hooked me up for free :) I must have been too tired and mis...
- Mon Nov 13, 2017 9:47 pm
- Forum: The Construction Site
- Topic: Building an Alembic with Optional Offset Column Hybrid
- Replies: 44
- Views: 8396
Re: Building an Alembic with Optional Offset Column Hybrid
:crazy: :crazy: i have same issue, as soon as i see anything copper i start thinking of how can i use it to make a still :) Collecting material to build 3" flute I've been picking up all vases that are for sale around town, thinking of making something like you have here, yours looks very nice!...
- Tue Nov 07, 2017 3:35 pm
- Forum: ** Welcome Center **
- Topic: Hello from Ontario
- Replies: 14
- Views: 1690
Re: Hello from Ontario
Welcome, another Canadian!
I fix cnc machines
Sent from my
I fix cnc machines
Sent from my
- Thu Nov 02, 2017 11:47 am
- Forum: Column Builds
- Topic: 3" Flute Build
- Replies: 79
- Views: 10276
Re: 3" Flute Build
When you use one of phases with ground to make 120 just remeber if that devices catches fire you will not be protected very well, t will catch fire before tripping the breaker.
Some people hook up their washing machines to one phase of dryer plug, not very good idea.
Some people hook up their washing machines to one phase of dryer plug, not very good idea.
- Wed Nov 01, 2017 6:55 pm
- Forum: ** Welcome Center **
- Topic: Hello from Winnipeg, Canada
- Replies: 7
- Views: 1489
Re: Hello from Winnipeg, Canada
Thanks for welcomes :) good to be here Been busy reading forums. Got a different boiler now, my own, 30 liter ss pot. Built a new head also. Finally got a 15 gallon beer keg now looking to use 3" pipe i got laying in my garage to build a flute :) Im at 4 gen Sweet feed and 3rd gen UJSSM also 50...
- Thu Oct 12, 2017 8:18 am
- Forum: Tried and True Recipes
- Topic: NChooch's Carolina Bourbon
- Replies: 1043
- Views: 280666
Re: NChooch's Carolina Bourbon
I did stir it, have SS paint mixing propeller attached to my drill the material on pot is so thin it turned blue/black where inductive heater is Got pot with thicker bottom and it went quite well. the smell is incredible! felt like eating some of it ) I failed to read the whole tread later edition o...
- Tue Oct 03, 2017 8:37 pm
- Forum: Tried and True Recipes
- Topic: sweetfeed whisky
- Replies: 4220
- Views: 672252
Re: sweetfeed whisky
first batch went well, ended up with 1 liter 63% 1 liter 50% and almost 4 liters of 40% (I stopped distilling at 20%) as per instructions I added sugar again to hot backset, stirred it and once cooled down added to fermenter - not long after it started bubbling again, not as nice as first time but i...
- Thu Sep 28, 2017 7:01 pm
- Forum: Tried and True Recipes
- Topic: NChooch's Carolina Bourbon
- Replies: 1043
- Views: 280666
Re: NChooch's Carolina Bourbon
Learned my lesson: do not use cheap SS pots on induction stove - 5 minutes after I put it on came the smell of burning. Will try to do it again tomorrow, will get myself a better pot :) Not that much corn had actually burned, just very fine powder, I am debating weather I should throw it all away or...
- Thu Sep 28, 2017 6:57 pm
- Forum: Tried and True Recipes
- Topic: sweetfeed whisky
- Replies: 4220
- Views: 672252
Re: sweetfeed whisky
Will be running mine tomorrow: ~8lb sweet feed with molasses added little corn, maybe 1lb ~8lb sugar 8.5 tbs red star bakers yeast 6 gal of water Started at 1.085 on Sept 23rd today it is 0.093 (I'm amazed) Still occasional bubbles, not sure if it is done (first time doing anything with grain) Have ...
- Sat Sep 23, 2017 8:46 pm
- Forum: ** Welcome Center **
- Topic: Hello from Winnipeg, Canada
- Replies: 7
- Views: 1489
Hello from Winnipeg, Canada
Hello, My name is Dima, I'm 31, industrial mechanic. Live in Winnipeg, Canada but born and raised in Ukraine, left homeland 15 years ago, but call Canada my home and it is home for my children. Like to do things, figure out how they work and try to improve :) My cousin (35 years older than i am) bac...