Could I keep the hearts from the 1st spirits run, mix that with my 1/2 boiler of low wines and water (Keeping at 80 abv or less) and run that as like a 1.5x spirit run distillate?
Or should I keep the hearts out and throw the heads / tails into the extra half boiler? I’m looking for a pure neutral / grain spirit. No taste.
Thank you!
If I have a boiler and a half of low wines, what’s do I do?
Moderator: Site Moderator
- still_stirrin
- Master of Distillation
- Posts: 10337
- Joined: Tue Mar 18, 2014 7:01 am
- Location: where the buffalo roam, and the deer & antelope play
Re: If I have a boiler and a half of low wines, what’s do I do?
Or (3), take all of the collection from your 1st spirit run (called “high wines”) and add that to the remaining low wines and rerun that as the last spirit run. And then, make cuts on that.
ss
ss
My LM/VM & Potstill: My build thread
My Cadco hotplate modification thread: Hotplate Build
My stock pot gin still: stock pot potstill
My 5-grain Bourbon recipe: Special K
My Cadco hotplate modification thread: Hotplate Build
My stock pot gin still: stock pot potstill
My 5-grain Bourbon recipe: Special K