1 inch spear into the keg right
I was thinking id reduce ito to 3/4 or half because it not long enough and i dont have a 1 inch coupler or more 1 inch pipe around, just reducers from 1 to 1/2 or 3/4...
Thoughts? Rest of the system is mostly 2 inch. See recent thread for build.
Im.leaning toward the 3/4 but the 1/2 parts are more plentiful in my shed
Thump spear reduction
Moderator: Site Moderator
Thump spear reduction
<no stopping to corner anytime [] no parking passenger zone>
When people tell me I'll regret that in the morning, I sleep till noon.
When people tell me I'll regret that in the morning, I sleep till noon.
Re: Thump spear reduction
3/4 will be ok. I think 1/2 might be too small. The 1/2 might also be ok, but I think it would have a noticeable effect on vapor speed going into the thumper.
Re: Thump spear reduction
Thats what im thinking. I found the 3/4 reducer so im in business
<no stopping to corner anytime [] no parking passenger zone>
When people tell me I'll regret that in the morning, I sleep till noon.
When people tell me I'll regret that in the morning, I sleep till noon.
-
- Master of Distillation
- Posts: 3387
- Joined: Thu Dec 01, 2016 6:27 pm
- Location: Ontario
Re: Thump spear reduction
Should be good..
My is 1" reduced at the foot to 3/4", and works fine..
Mars
My is 1" reduced at the foot to 3/4", and works fine..
Mars
" I know quite certainly that I myself have no special talent. Curiosity, Obsession and dogged endurance, combined with self-criticism, have brought me to my knowledge and understanding "
– Albert Einstein
– Albert Einstein
-
- Site Donor
- Posts: 93
- Joined: Sun Jun 11, 2017 12:13 pm
- Location: Florida
Re: Thump spear reduction
Stiller and, do you run solids. Corn using that spear?