I think each side of the jig could be a 1X3 (trimmed on edge to give the 2X2 inside dimensions). Then attach the pieces to make the box with open ends.McIndy wrote:How did you assemble your jig? Looks like from what I can tell, one piece of 4x4 hollowed out somehow?
McIndy
Twin Slant Plate the full still -- Liquorice Stick
Moderator: Site Moderator
Re: Twin Slant Plate the full still -- Liquorice Stick
Still happy, Still learning, Still reading
Theo
New distiller reading lounge. http://homedistiller.org/forum/viewforum.php?f=46
Theo
New distiller reading lounge. http://homedistiller.org/forum/viewforum.php?f=46
Re: Twin Slant Plate the full still -- Liquorice Stick
Great jig. On bottom of box what does it have wrote..."??? Pipe flush with bottom of box"...does it say 2ft. Can't quite make it out.
-
- Rumrunner
- Posts: 706
- Joined: Wed Feb 03, 2010 6:11 am
Re: Twin Slant Plate the full still -- Liquorice Stick
the box says "set pipe flush with bottom of box" this is because for a while I was building boka heads that allowed people to just slip couple 2" sections of pipe onto them to make there own boka
The box was assembled out of 1" x 3" pine and made to fit the pipe tight enough to almost force it over the pipe
The box was assembled out of 1" x 3" pine and made to fit the pipe tight enough to almost force it over the pipe
Daddy used, to say " Any landing you can walk away from is a good one"
Calculations don't mean shit when compared to the real world practical experience of many...RAD 9/2010
Calculations don't mean shit when compared to the real world practical experience of many...RAD 9/2010
Re: Twin Slant Plate the full still -- Liquorice Stick
Nice work. I can tell this isn't your first rodeo!