Cot-6 intro

New to distillation, or simply new to the HD forums.
** Your first post MUST go here. Introduce yourself and tell us a bit about your interest in distilling. Any posts asking distilling questions will be deleted. **

Moderator: Site Moderator

Post Reply
Cor-6
Novice
Posts: 4
Joined: Sat Jun 26, 2021 4:19 am

Cot-6 intro

Post by Cor-6 »

I’m old
And I’ve always wanted this as a hobbyist so-here we be
I’ve also been curious for years on the technology of aging
alcohol and the different processes of aging
User avatar
Deplorable
Site Donor
Site Donor
Posts: 3984
Joined: Thu Jun 25, 2020 12:10 pm
Location: In the East, (IYKYK)

Re: Cot-6 intro

Post by Deplorable »

Welcome.
watch your step. lots of rabbit holes.
Fear and ridicule are the tactics of weak-minded cowards and tyrants who have no other leadership talent from which to draw in order to persuade.
User avatar
Twisted Brick
Master of Distillation
Posts: 3771
Joined: Sat Mar 09, 2013 4:54 pm
Location: Craigh Na Dun

Re: Cot-6 intro

Post by Twisted Brick »

Welcome Cor-6!

Little-known side-benefit from distilling is that it makes you younger.

Enjoy.
“Always carry a flagon of whiskey in case of snakebite, and furthermore, always carry a small snake.”

- W.C. Fields

My EZ Solder Shotgun
My Steam Rig and Manometer
Cor-6
Novice
Posts: 4
Joined: Sat Jun 26, 2021 4:19 am

Re: Cot-6 intro

Post by Cor-6 »

Twisted brick I like your last monomer design
Just a note if you ever get sick of the cleaning solder and flux you can always tig weld the copper I was born and bread on tig welding copper on high temp combust it’s
It cleans up allot better than solder holds a lot more pressure and is just nicer to machine if needed
tiramisu
Swill Maker
Posts: 489
Joined: Wed Dec 26, 2018 3:03 pm

Re: Cot-6 intro

Post by tiramisu »

Side note... There is no technology that replaces aging in a barrel. The sooner you start the less likely it will still be in the barrel when you die.
Post Reply