Hello I am Atton from the PRA, I am a software dev student and with some luck hopefully a future code monkey. I am into all things systems be them automotive engines, electronics, firearms, computers and machines in general. I also happen to when seasons permitting run my still from time to time for the production of spirit for various uses and in other cases for the production of a genuine Aussie dark rum.
Of which came to a screaming halt thanks to a thermal fuse. (I literally ran the boiler as conservatively as possible and it did not fail during operation)
While my hand tool and building skills are somewhat limited they have improved over time. To the point where I can make car repairs on some minor things with the limited tools I have. Other than that I dare say I am a bucket of flaws with at times the brain of a Koala.
Hello From the People's Republic Of Australia
Moderator: Site Moderator
- Saltbush Bill
- Site Mod
- Posts: 9677
- Joined: Thu Mar 17, 2011 2:13 am
- Location: Northern NSW Australia
Re: Hello From the People's Republic Of Australia
Welcome Atton
At least a Koala knows that Australia is not a Republic
Suggest you keep politics and your hobbies separated..
At least a Koala knows that Australia is not a Republic
Suggest you keep politics and your hobbies separated..
Re: Hello From the People's Republic Of Australia
Trample the injured and hurdle the dead.
Re: Hello From the People's Republic Of Australia
You're going to want to review your wiring situation. Thermal breaker tripping would indicate that you have too small wires supplying it, causing too much resistance and/or too much voltage drop (increasing heat and current in the circuit)
Re: Hello From the People's Republic Of Australia
Apologises for stretching the rulesLWTCS wrote: ↑Thu Oct 28, 2021 6:49 am Welcome.
https://homedistiller.org/forum/viewtop ... =35&t=5090
Re: Hello From the People's Republic Of Australia
Wow, the wokes are on to you straight away mate. Other than that, you will learn a lot here.
-
- Distiller
- Posts: 1199
- Joined: Fri Apr 17, 2015 3:57 pm
- Location: Far northern tropics of Australia.
Re: Hello From the People's Republic Of Australia
gday old mate, don’t crack the sads over a few drongos going the raw prawn, give them the flick and she’ll be right.
--
50L Beer keg boiler, 2200W element
Modular 2" Pot Still
opinions are free and everybody has them, experience costs you time
50L Beer keg boiler, 2200W element
Modular 2" Pot Still
opinions are free and everybody has them, experience costs you time
Re: Hello From the People's Republic Of Australia
atton wrote: ↑Fri Oct 29, 2021 12:37 amApologises for stretching the rulesLWTCS wrote: ↑Thu Oct 28, 2021 6:49 am Welcome.
https://homedistiller.org/forum/viewtop ... =35&t=5090
Not to worry.
At times an enthusiastic interest at getting straight to the meat and potatoes of the intended subject matter can render some of the other reading content here a bit less interesting.
I just want you to understand what ultimately keeps the peace here.
Dog whistle terminology best left at the door. Keep to distilling talk and ya just can't go wrong.
No matter.
Welcome again.
Trample the injured and hurdle the dead.
- Yummyrum
- Global moderator
- Posts: 7657
- Joined: Sat Jul 06, 2013 2:23 am
- Location: Fraser Coast QLD Aussie
Re: Hello From the People's Republic Of Australia
What he said
Welcome mate.
Welcome mate.
My recommended goto .
https://homedistiller.org/wiki/index.ph ... ion_Theory
https://homedistiller.org/wiki/index.ph ... ion_Theory