My starter still
Moderator: Site Moderator
My starter still
Chinese pot still but it does everything I need it to do.
Nothing to see and nothing to hide.
- Deplorable
- Site Donor
- Posts: 3984
- Joined: Thu Jun 25, 2020 12:10 pm
- Location: In the East, (IYKYK)
Re: My starter still
You gonna get loved tenderly for that silicone tube off the worm. Change that out for a copper exstention.
Fear and ridicule are the tactics of weak-minded cowards and tyrants who have no other leadership talent from which to draw in order to persuade.
- still_stirrin
- Master of Distillation
- Posts: 10337
- Joined: Tue Mar 18, 2014 7:01 am
- Location: where the buffalo roam, and the deer & antelope play
Re: My starter still
..... or, put a SS funnel in the jar.
ss
ss
My LM/VM & Potstill: My build thread
My Cadco hotplate modification thread: Hotplate Build
My stock pot gin still: stock pot potstill
My 5-grain Bourbon recipe: Special K
My Cadco hotplate modification thread: Hotplate Build
My stock pot gin still: stock pot potstill
My 5-grain Bourbon recipe: Special K
Re: My starter still
I have already upgrade from that still to a reflux still i got tired of dealing with the leak in the lid.
Nothing to see and nothing to hide.
Re: My starter still
Deplorable wrote: ↑Sun Apr 04, 2021 12:46 pm You gonna get loved tenderly for that silicone tube off the worm. Change that out for a copper exstention.
Not worried about it i talked too a local brewery they have been using silicone gaskets and seals for years with no issues besides the alcohol never touches it.
Nothing to see and nothing to hide.
Re: My starter still
That was the first accessory i bought after my hydrometer.
Nothing to see and nothing to hide.
- Saltbush Bill
- Site Mod
- Posts: 9678
- Joined: Thu Mar 17, 2011 2:13 am
- Location: Northern NSW Australia
Re: My starter still
Members have been trying to nudge you gently in the right direction......You are NOT paying attention to what they are telling you!
This forum does not care what the "distillery down the road" thinks is right or wrong.
" These forums take a very strong negative view on the use of plastics and synthetics in distilling. It simply is not safe to use these during any part of the distillation process with the exception of HPDE buckets which are acceptable for fermentation. There simply are too many types of plastics and a lack of reliable information for us to reliably advocate their use anywhere in the distillation apparatus. Also, from past posting history, this topic seems to quickly boil down into an almost religious flame war. Thus we simply will not put up with it, and posts about any form of plastic use will be edited, deleted or locked. "
Re: My starter still
Okay don't get angry with me i didn't even bring up i just posted a picture and then got attacked because my water pump came with something that is apparently a touchy subject im brand new too to the forum member less then a week and kinda having second thoughts now about joining.
Nothing to see and nothing to hide.
-
- Site Donor
- Posts: 1739
- Joined: Wed Dec 30, 2020 10:17 pm
- Location: Northwest France
Re: My starter still
No-one's talking about the tubes carrying coolant, they're talking about the little stub of silicone hose coming off the end of the worm, where the distillate comes out.
"I have a potstill that smears like a fresh plowed coon on the highway" - Jimbo
A little spoon feeding *For New & Novice Distillers
A little spoon feeding *For New & Novice Distillers
- Saltbush Bill
- Site Mod
- Posts: 9678
- Joined: Thu Mar 17, 2011 2:13 am
- Location: Northern NSW Australia
Re: My starter still
No body is getting angry with you ......I'm simply pointing out that the forum has rules and that members are expected to respect those rules.
Maybe you would like to take the time to read them, you can find them at the bottom of this page.
If I was getting angry there would be a 1 Next to your ID.
By the way , NormandieStill is right , its not about your water pump lines.
Maybe you would like to take the time to read them, you can find them at the bottom of this page.
If I was getting angry there would be a 1 Next to your ID.
Thats your choice, but I can tell you that if you do choose to stay you will learn more about the safe and proper ways of distilling than you will anywhere else. This forum has the combined knowledge of thousands of people from hundreds of places on earth that have spent countless hours building stills and then using those stills. You wont find that anywhere else.
By the way , NormandieStill is right , its not about your water pump lines.
Re: My starter still
I tossed that as soon as I purchased the ss jar funnels.NormandieStill wrote: ↑Thu Apr 08, 2021 9:10 pm No-one's talking about the tubes carrying coolant, they're talking about the little stub of silicone hose coming off the end of the worm, where the distillate comes out.
Nothing to see and nothing to hide.
- Kindafrench
- Site Donor
- Posts: 179
- Joined: Mon Apr 08, 2019 2:05 am
Re: My starter still
What material are all these gaskets made of? There could be a bunch of more silicon in the still. My flexible pipe for example, was delivered with silicon gaskets, well, they looked like. Your lids gaskets got the same colour. Please consider using flour paste instead of silicon if it‘s the case.
- rubberduck71
- Site Donor
- Posts: 736
- Joined: Sat May 30, 2020 11:22 am
- Location: Eastern PA
Re: My starter still
+1 to Kindafrench feedback
Another alternative is to wrap said gaskets in plumber's PTFE tape. I did this on my Digiboil conversion kit.
The main point to everyone's comments above is that the ABV% we're making our product at, alcohol becomes a solvent. Anything not PTFE/teflon will eventually break down & leak. And think about where that broken down material is going ---> into stuff you're consuming. Remember all the issues that breast implants caused? And what were they made of? That's right: SILICONE.
I'm also new here (just under 1 year). Some folks on here have forgotten more about this hobby than I'll ever learn. Just head into it knowing that & you'll be fine. Respect the long-timers, continue asking questions, but remember that search function in that blue bar in the top of the screen is your new best friend. 99% of the questions you have can be found with 5 min of effort.
Enjoy the ride,
Duck
Another alternative is to wrap said gaskets in plumber's PTFE tape. I did this on my Digiboil conversion kit.
The main point to everyone's comments above is that the ABV% we're making our product at, alcohol becomes a solvent. Anything not PTFE/teflon will eventually break down & leak. And think about where that broken down material is going ---> into stuff you're consuming. Remember all the issues that breast implants caused? And what were they made of? That's right: SILICONE.
I'm also new here (just under 1 year). Some folks on here have forgotten more about this hobby than I'll ever learn. Just head into it knowing that & you'll be fine. Respect the long-timers, continue asking questions, but remember that search function in that blue bar in the top of the screen is your new best friend. 99% of the questions you have can be found with 5 min of effort.
Enjoy the ride,
Duck
There are two times of year: FOOTBALL SEASON and... Waiting For Football Season