New still, build complete
Posted: Fri Jan 08, 2021 5:18 pm
Hey guys and gals,
Good evening (or morning for our Aussie and NZ friends)!
I built a 2” Boka this week using the wisdom shared here. The build was an interesting process. I previously have struggled with sweating copper. I watched a few YT videos and refined my skills. I will say that this build went smoothly and better than expected.
I started with the coil winding. I bought a roll of 1/4” refrigeration copper and built a winding jig. I filled the tube with water and it rolled up fairly easily.
The rest of the still went together and it was straightforward with all the info here. I’m running a 5’ column packed with copper mesh. I already have an electric HERMS brewing system so I’m using my 20 gal brew kettle with the 5500W element for power.
I ran a vinegar cleaning run today. Thankfully all my joints held and there were no leaks.
Can’t wait to run my sacrificial run and then my first product.
Good evening (or morning for our Aussie and NZ friends)!
I built a 2” Boka this week using the wisdom shared here. The build was an interesting process. I previously have struggled with sweating copper. I watched a few YT videos and refined my skills. I will say that this build went smoothly and better than expected.
I started with the coil winding. I bought a roll of 1/4” refrigeration copper and built a winding jig. I filled the tube with water and it rolled up fairly easily.
The rest of the still went together and it was straightforward with all the info here. I’m running a 5’ column packed with copper mesh. I already have an electric HERMS brewing system so I’m using my 20 gal brew kettle with the 5500W element for power.
I ran a vinegar cleaning run today. Thankfully all my joints held and there were no leaks.
Can’t wait to run my sacrificial run and then my first product.