2" TriClamp Weldless Bulkhead Fitting
Moderator: Site Moderator
2" TriClamp Weldless Bulkhead Fitting
Anyone know where to get one of these besides Stilldragon?
stillin' when I shoulda been buyin'
Re: 2" TriClamp Weldless Bulkhead Fitting
https://www.brewershardware.com/TC20M20.html" onclick="window.open(this.href);return false;" rel="nofollow
I found this. You would still need a bit and gasket.
I found this. You would still need a bit and gasket.
Life is a journey you take alone. Make sure you do what you what makes you happy
- FreeMountainHermit
- Site Donor
- Posts: 1769
- Joined: Thu May 12, 2011 6:45 pm
- Location: Two Dogs Holler, West Virginia
Re: 2" TriClamp Weldless Bulkhead Fitting
That's not what he asked for.pfshine wrote:https://www.brewershardware.com/TC20M20.html
I found this. You would still need a bit and gasket.
Blah, blah, blah,........
- FreeMountainHermit
- Site Donor
- Posts: 1769
- Joined: Thu May 12, 2011 6:45 pm
- Location: Two Dogs Holler, West Virginia
Re: 2" TriClamp Weldless Bulkhead Fitting
What's wrong with buying fron Stilldragon ?700G wrote:Anyone know where to get one of these besides Stilldragon?
Blah, blah, blah,........
- still_stirrin
- Master of Distillation
- Posts: 10344
- Joined: Tue Mar 18, 2014 7:01 am
- Location: where the buffalo roam, and the deer & antelope play
Re: 2" TriClamp Weldless Bulkhead Fitting
I can't answer your question directly. But, (see #11) http://homedistiller.org/forum/viewtopi ... =35&t=5090FreeMountainHermit wrote:....What's wrong with buying fron Stilldragon ?
I'm not the policeman, or the judge (or lawyer). All I know is what I read....
ss
My LM/VM & Potstill: My build thread
My Cadco hotplate modification thread: Hotplate Build
My stock pot gin still: stock pot potstill
My 5-grain Bourbon recipe: Special K
My Cadco hotplate modification thread: Hotplate Build
My stock pot gin still: stock pot potstill
My 5-grain Bourbon recipe: Special K
Re: 2" TriClamp Weldless Bulkhead Fitting
That sure is a fancy part. Wish I knew about those 6 months ago...
- likker liker
- Site Donor
- Posts: 395
- Joined: Tue May 12, 2015 9:38 pm
- Location: the dry side of washington
Re: 2" TriClamp Weldless Bulkhead Fitting
Also
https://www.amazon.com/gp/aw/d/B00835O0 ... UTF8&psc=1#" onclick="window.open(this.href);return false;" rel="nofollow
https://www.amazon.com/gp/aw/d/B00835O0 ... UTF8&psc=1#" onclick="window.open(this.href);return false;" rel="nofollow
- FreeMountainHermit
- Site Donor
- Posts: 1769
- Joined: Thu May 12, 2011 6:45 pm
- Location: Two Dogs Holler, West Virginia
Re: 2" TriClamp Weldless Bulkhead Fitting
What part of weldless did you not understand ?likker liker wrote:Also
https://www.amazon.com/gp/aw/d/B00835O0 ... UTF8&psc=1#" onclick="window.open(this.href);return false;" rel="nofollow
Blah, blah, blah,........
Re: 2" TriClamp Weldless Bulkhead Fitting
still_stirrin wrote:I can't answer your question directly. But, (see #11) http://homedistiller.org/forum/viewtopi ... =35&t=5090FreeMountainHermit wrote:....What's wrong with buying fron Stilldragon ?
I'm not the policeman, or the judge (or lawyer). All I know is what I read....
ss
Read it closer than there was no link posted TADA!
It is what you make it
- shadylane
- Master of Distillation
- Posts: 10407
- Joined: Sat Oct 27, 2007 11:54 pm
- Location: Hiding In the Boiler room of the Insane asylum
Re: 2" TriClamp Weldless Bulkhead Fitting
My Norton virus protection blocked me from visiting that web site due to a "Known security threat"pfshine wrote:https://www.brewershardware.com/TC20M20.html
I found this. You would still need a bit and gasket.
Re: 2" TriClamp Weldless Bulkhead Fitting
Dang fmh. What crawled up your leibig and died.
Shady, I have never had a problem with Brewer's hardware. Great prices and they ship fast.
Shady, I have never had a problem with Brewer's hardware. Great prices and they ship fast.
Life is a journey you take alone. Make sure you do what you what makes you happy
-
- Master of Distillation
- Posts: 3002
- Joined: Wed Jul 31, 2013 4:45 pm
- Location: Hounds Hollow, VA
Re: 2" TriClamp Weldless Bulkhead Fitting
+1 on the Brewers Hardware. Good dependable place for parts and fittings of all sizes. Takes way less time to get than ordering from China on ebay too.pfshine wrote:Dang fmh. What crawled up your leibig and died.
Shady, I have never had a problem with Brewer's hardware. Great prices and they ship fast.
The piece in question looks pretty specialized. Personally, I would buy as advertised and roll with it.
LM Still Operating Instructions
Cranky's New Distiller's Advice
Using Google Search
Drinking Rum before noon makes you a Pirate not an alcoholic.
Cranky's New Distiller's Advice
Using Google Search
Drinking Rum before noon makes you a Pirate not an alcoholic.
- likker liker
- Site Donor
- Posts: 395
- Joined: Tue May 12, 2015 9:38 pm
- Location: the dry side of washington
Re: 2" TriClamp Weldless Bulkhead Fitting
Ok jack aFreeMountainHermit wrote:What part of weldless did you not understand ?likker liker wrote:Also
https://www.amazon.com/gp/aw/d/B00835O0 ... UTF8&psc=1#" onclick="window.open(this.href);return false;" rel="nofollow
It's just advice, they have lots of fitting. Do I need to point out the exact one for someone to use
- shadylane
- Master of Distillation
- Posts: 10407
- Joined: Sat Oct 27, 2007 11:54 pm
- Location: Hiding In the Boiler room of the Insane asylum
Re: 2" TriClamp Weldless Bulkhead Fitting
Looked up Brewers Hardware's website and they have some good stuff at a good price.
But my virus protection doesn't like this link https://www.brewershardware.com/TC20M20.html" onclick="window.open(this.href);return false;" rel="nofollow
But my virus protection doesn't like this link https://www.brewershardware.com/TC20M20.html" onclick="window.open(this.href);return false;" rel="nofollow
Re: 2" TriClamp Weldless Bulkhead Fitting
It's a 2" triclamps ferrule by 2" male npt
Life is a journey you take alone. Make sure you do what you what makes you happy
- FreeMountainHermit
- Site Donor
- Posts: 1769
- Joined: Thu May 12, 2011 6:45 pm
- Location: Two Dogs Holler, West Virginia
Re: 2" TriClamp Weldless Bulkhead Fitting
Something wrong with helping the OP with his/her request , Jack ?likker liker wrote:Ok jack aFreeMountainHermit wrote:What part of weldless did you not understand ?likker liker wrote:Also
https://www.amazon.com/gp/aw/d/B00835O0 ... UTF8&psc=1#" onclick="window.open(this.href);return false;" rel="nofollow
It's just advice, they have lots of fitting. Do I need to point out the exact one for someone to use
My Google Fu has failed me in my attempts to find such an item. Possibly a proprietary item from SD ?
Blah, blah, blah,........
Re: 2" TriClamp Weldless Bulkhead Fitting
That is why I posted the one I did. All it needs is a nut and gasket. Which are quite easy to acquire if you don't already have them.
Life is a journey you take alone. Make sure you do what you what makes you happy
-
- Site Donor
- Posts: 1338
- Joined: Sun Dec 02, 2012 10:40 am
Re: 2" TriClamp Weldless Bulkhead Fitting
PF that 2" pipe thread is tapered... not straight like the fitting from SD...
FS
FS
Do it Safely read The safety section: http://homedistiller.org/forum/viewforum.php?f=33
New Distillers Reading: http://homedistiller.org/forum/viewforum.php?f=46
Hookline's Basic Still Designs: http://homedistiller.org/forum/viewtopi ... =1&t=18873
New Distillers Reading: http://homedistiller.org/forum/viewforum.php?f=46
Hookline's Basic Still Designs: http://homedistiller.org/forum/viewtopi ... =1&t=18873
Re: 2" TriClamp Weldless Bulkhead Fitting
Ok. But it would still work just fine with the nut and gasket. The further down the threads you go the bigger it gets to the 2" max. Either way the gasket makes the seal not the threads. I ain't trying to be snotty with ya fs at all just not seeing it like you right now.
Life is a journey you take alone. Make sure you do what you what makes you happy
-
- Rumrunner
- Posts: 710
- Joined: Thu Jun 05, 2014 10:37 am
- Location: New Zealand
Re: 2" TriClamp Weldless Bulkhead Fitting
You could get a 2" triclover ferrel and a 2" pipe nipple and weld them together, then all you need are a couple of nuts and a gasket
Re: 2" TriClamp Weldless Bulkhead Fitting
I'm pretty sure NPS would be much more ideal than NPT in this particular application, just at a glance. Corene or one of our other fine machinists would know for sure.
700G, will they not ship it to you? $40 seems like a great price for what it is. I'm not advocating or bashing the vendor, so much as just curious why you are asking...
700G, will they not ship it to you? $40 seems like a great price for what it is. I'm not advocating or bashing the vendor, so much as just curious why you are asking...
Re: 2" TriClamp Weldless Bulkhead Fitting
Thanks PF, I went ahead and ordered that part plus gaskets and a nut. Only reason I asked for a vendor other than Stilldragon, is that they are out of stock until Oct. and it's the only part I lack on my project.
stillin' when I shoulda been buyin'
- FreeMountainHermit
- Site Donor
- Posts: 1769
- Joined: Thu May 12, 2011 6:45 pm
- Location: Two Dogs Holler, West Virginia
Re: 2" TriClamp Weldless Bulkhead Fitting
700G, would you please post the nut and gasket that you ordered as the link that PF posted is for a 2" NPT fitting and I'm very confused now.
Thank you, Sir.
Thank you, Sir.
Blah, blah, blah,........
Re: 2" TriClamp Weldless Bulkhead Fitting
A Jam Nut:FreeMountainHermit wrote:700G, would you please post the nut and gasket that you ordered as the link that PF posted is for a 2" NPT fitting and I'm very confused now.
Thank you, Sir.
Silicone O-ring to be wrapped with teflon:
stillin' when I shoulda been buyin'
- FreeMountainHermit
- Site Donor
- Posts: 1769
- Joined: Thu May 12, 2011 6:45 pm
- Location: Two Dogs Holler, West Virginia
Re: 2" TriClamp Weldless Bulkhead Fitting
Thanks, buddy. I''ve never seen one in 2 inch. Hope it works out great for ya.
Keep us posted on your build and put up a pic or two !!!
Keep us posted on your build and put up a pic or two !!!
Blah, blah, blah,........
Re: 2" TriClamp Weldless Bulkhead Fitting
700G McMasterCarr has Fep over Silicone O-rings that size for about $6.00 also PTFE but they are some what harder material might be tougher to seal. Thanks guys for the info on Brewershardware, good prices.
Re: 2" TriClamp Weldless Bulkhead Fitting
Thanks!srs787 wrote:700G McMasterCarr has Fep over Silicone O-rings that size for about $6.00 also PTFE but they are some what harder material might be tougher to seal. Thanks guys for the info on Brewershardware, good prices.
and FreeMountainHermit, I'll have pics in a week or so.
stillin' when I shoulda been buyin'
Re: 2" TriClamp Weldless Bulkhead Fitting
Stilldragon has since been removed from the ban list... just an update, just in case noobs like myself reads this post.
http://homedistiller.org/forum/viewtopi ... 35&t=59208
http://homedistiller.org/forum/viewtopi ... 35&t=59208
Re: 2" TriClamp Weldless Bulkhead Fitting
... and since I didn't know such a thing existed, but it might be nice to have on hand, there is a 1.5" version available here:
https://www.brewhardware.com/product_p/tc15wlf.htm" onclick="window.open(this.href);return false;" rel="nofollow
https://www.brewhardware.com/product_p/tc15wlf.htm" onclick="window.open(this.href);return false;" rel="nofollow
________________
I drank fifty pounds of feed-store corn
'till my clothes were ratty and torn
I drank fifty pounds of feed-store corn
'till my clothes were ratty and torn
Re: 2" TriClamp Weldless Bulkhead Fitting
I bought several from overseas if you still need one