Funnel porn, let's see em

[jedneck]

Built a funnel this morning. Its just a piece of sheet and an old 3/4 inch fitting with a piece of 10g wire rolled into the lip for strength. Don't have any build pics.

[acfixer69]

Looks cool Jed, I made one similar a few years back but I used the two finger rule

AC
see if I can find a pic she is a rustic one

[Bigbob]

You guys are too clean!

A gift from my son

[skow69]

This is the biggest funnel that can be made from 1" pipe. 6,28" long. With welsh seams. Little
tiny Welsh seams.

I love Welsh seams.

[Nutmegmooner]

See if I can get this picture thing figured out. The first is a copper bowl that I transformed. I love for collecting distillate. Second was a stainless bowl and it works real well for filling my keg boiler. (Well, close enough)

attachment=0]DSCN0975.jpg[/attachment

[CR33G3R]

Here are the two I use

[shadylane]

Here's one of them

[Swedish Pride]

[url Funnel pics[/url]

they are lovely, did you make them?

Not sure if if it's your name in the photobucket tab, may want to change it if so.

[bearriver]

Jed, I like the wire you put on the lip. That was a good idea.

Here is two more for the DIYers in the room. I used a dog food bowl and a sankey spear for the first, then copper scrap for the 2nd.

Scuse the mess.

[mtnshiner85]

Here's mine

[JBs]

Here’s the one I use

[ezlle71]

Just made this one tonight. 20oz sheet copper and a 1”x 1/2 “ fittingxcoupling and a stub of 1/2”

[Bushman]

Since this old thread has been revived if people are interested in making a funnel here is a link to more funnels made by our members.
https://homedistiller.org/forum/viewtop ... 83&t=23206