- My Pot Still
- Thumper
- Worm
My First Build is finished
Moderator: Site Moderator
Re: My First Build is finished
Looks good!
-
Saltbush Bill
- Site Mod
- Posts: 9750
- Joined: Thu Mar 17, 2011 2:13 am
- Location: Northern NSW Australia
Re: My First Build is finished
Top job on the still Jim , plenty of effort gone into that 
Unfortunately the use of glass thumpers is frowned upon on this forum for safety reasons.
A nice little copper thumper will look better anyway.
Unfortunately the use of glass thumpers is frowned upon on this forum for safety reasons.
A nice little copper thumper will look better anyway.
-
Yummyrum
- Global moderator
- Posts: 7746
- Joined: Sat Jul 06, 2013 2:23 am
- Location: Fraser Coast QLD Aussie
Re: My First Build is finished
+1
You have some real skills there . Make yourself a nice safe Thumper
Happy Still’n
You have some real skills there . Make yourself a nice safe Thumper
Happy Still’n
My recommended goto .
https://homedistiller.org/wiki/index.ph ... ion_Theory
https://homedistiller.org/wiki/index.ph ... ion_Theory
-
corene1
- HD Distilling Goddess
- Posts: 3045
- Joined: Tue Jan 08, 2013 8:05 pm
- Location: The western Valley
Re: My First Build is finished
Hate to be the bad voice but the glass thumper should go. On the coil for the worm. What size is it? Needs to be at least 3/8 inch ID to prevent a possible blockage and pressure buildup. Also It looks to have some low and high spots in the downward spiral. This will lead to puddling and possible huffing when it is in use. It need to be a nice continuous down hill spiral . I check mine by filling the tube up with water and letting it drain, then blow in the tube, if any more water comes out you have a trap in the coil.