These are a fully modular design, meaning you can option them as you require. 3 or 4 plates for whiskey is a typical starting point. 5 plates with a packable section for vodka production will give you all you need for both vodka and whiskey making.
The flanges are fully compatible with triclamp/triclover components, including Mile Hi stuff. They have been engineered over time to give maximum flexibility, great performance and a great tasting product.
They are made in Australia using as much local content as possible, we support local suppliers where we can. We are endorsed by Olddog, the maker of the original magic flute. The products we make stay true to his original design philosophy's.
The support of the greater HD community and the great minds within it has made these stills possible so if you are a donating member of HD, you get an instant $20 discount and all sales to non donating members get a $10 donation to HD. So, if you are not a donating member, donate and save!
We can offer relatively short delivery times and a machine that will work, out of the box.
Prices vary depending on the options you want and if you are U.S. based or down under. As per the rules of this forum, please PM any requests for prices or further information.
And all our stuff is full copper, right down to the parrot beak. The modular stills are supplied with silicone gaskets, however Teflon or cork works equally as well, depending on your preference. We only use high grade silver bearing solder. Please ask around if you have any doubts about the quality of the product and service.
We also make pot stills and can supply parts and components.
- A 4 plate set up, ideal for whiskey, rum or brandy
- A 5 plate with a packable section, vodka, gin and neutral
- Modules with pressed flanges. Triclamp compatible, no joints to fail
- Gasket detail of the module flanges