Modular 4" Flutes. All copper.

Forum for manufactures to post ads / links to their products that deal with Distillation

Moderator: Site Moderator

Forum rules
Links may be provided only by dealers themselves.Any seller that gets bad reviews will be removed.One ad per vendor
Locked
emptyglass
Site Donor
Site Donor
Posts: 1543
Joined: Sat Oct 09, 2010 3:59 am
Location: Victoria, Australia.Usually the shed. Sometimes the cellar.

Modular 4" Flutes. All copper.

Post by emptyglass » Sat Mar 15, 2014 3:18 am

Modular Flutes are now for sale.
These are a fully modular design, meaning you can option them as you require. 3 or 4 plates for whiskey is a typical starting point. 5 plates with a packable section for vodka production will give you all you need for both vodka and whiskey making.

The flanges are fully compatible with triclamp/triclover components, including Mile Hi stuff. They have been engineered over time to give maximum flexibility, great performance and a great tasting product.

They are made in Australia using as much local content as possible, we support local suppliers where we can. We are endorsed by Olddog, the maker of the original magic flute. The products we make stay true to his original design philosophy's.
The support of the greater HD community and the great minds within it has made these stills possible so if you are a donating member of HD, you get an instant $20 discount and all sales to non donating members get a $10 donation to HD. So, if you are not a donating member, donate and save!

We can offer relatively short delivery times and a machine that will work, out of the box.
Prices vary depending on the options you want and if you are U.S. based or down under. As per the rules of this forum, please PM any requests for prices or further information.

And all our stuff is full copper, right down to the parrot beak. The modular stills are supplied with silicone gaskets, however Teflon or cork works equally as well, depending on your preference. We only use high grade silver bearing solder. Please ask around if you have any doubts about the quality of the product and service.
We also make pot stills and can supply parts and components.
A 4 plate set up, ideal for whiskey, rum or brandy
A 4 plate set up, ideal for whiskey, rum or brandy
A 5 plate with a packable section, vodka, gin and neutral
A 5 plate with a packable section, vodka, gin and neutral
Modules with pressed flanges. Triclamp compatible, no joints to fail
Modules with pressed flanges. Triclamp compatible, no joints to fail
Gasket detail of the module flanges
Gasket detail of the module flanges
You design it, I make it. Copper and Stainless. Down under. PM me.

Locked