Clearing a wash

Any hardware used for mashing, fermenting or aging.

Moderator: Site Moderator

Post Reply
Guest

Clearing a wash

Post by Guest » Wed Feb 15, 2006 3:34 pm

using a reflux what purpous, if any is there in clearing a wash totally??

pipe_cleanner
Novice
Posts: 20
Joined: Tue Feb 14, 2006 11:50 am
Location: Brisbane, AU

Post by pipe_cleanner » Wed Feb 15, 2006 3:36 pm

For one the reflux will have a eisier job of stripping all the other stuff from the alcohol. Making it more efficent at its job.

knuklehead
Rumrunner
Posts: 641
Joined: Fri Oct 22, 2004 2:52 pm
Location: Canada

Post by knuklehead » Wed Feb 15, 2006 3:38 pm

It's not really necessary, some do some don't. You'll have to try it and decide for yourself.
... I say God bless you, I don't say bless you ... I am not the Lord, I can't do that ...
Dane Cook

crackher

Post by crackher » Thu Feb 16, 2006 1:17 pm

i would have to say that clearing a wash will provide you with a more stable boil. Think of boiling piece wihch are placed inside your pot. if you have a ton of slugde kicking arounf the bottom it will not boil as effectivly. Also I would assume that the column (when doing large runs) may begin to lose effective plates since the packing will begin to get dirty. but i am not a chemist, I am only thinking out loud here..but I do know that the cleaner the wash the easier the clean up afterwards...

possum
Distiller
Posts: 1159
Joined: Thu Sep 08, 2005 9:33 am
Location: small copper potstill with limestone water

Post by possum » Thu Feb 16, 2006 1:40 pm

Clearing the wash could be desireable if you have an internal heating element to prevent scorching.
Hey guys!!! Watch this.... OUCH!

Post Reply