silicon tape

Post here whats not safe to do or use.

Moderator: Site Moderator

Post Reply
User avatar
diesel1975
Novice
Posts: 40
Joined: Wed Mar 16, 2016 7:42 am

silicon tape

Post by diesel1975 »

Has anyone ever used silicon tape to seal a lid on a boiler. I can get my hands on some aircraft electrical tape that is made out of silicon tape called fusion tape. Heat is not an issue with this stuff as it will not melt.
User avatar
NZChris
Master of Distillation
Posts: 13062
Joined: Tue Apr 23, 2013 2:42 am
Location: New Zealand

Re: silicon tape

Post by NZChris »

Look up the specs for the product, or contact the manufacturer.
User avatar
diesel1975
Novice
Posts: 40
Joined: Wed Mar 16, 2016 7:42 am

Re: silicon tape

Post by diesel1975 »

•Thickness (in.): 0.018-0.022
•Width (in.): 0.9375-1.0625
•Dielectric Strength (volts/mil): 400 min.
•Tensile Strength (psi): 700 min.
•Elongation (%): 300 min.
•Bond Strength (lbs.in.): 2.0 min
•Volume Resistivity: 1x10^13 min.
•Water Absorption (%): 3 max.
THIS IS THE SPECS
User avatar
Danespirit
Site Donor
Site Donor
Posts: 2647
Joined: Tue Dec 25, 2012 8:09 am
Location: Denmark

Re: silicon tape

Post by Danespirit »

Maybe you'll find your answer here: http://homedistiller.org/forum/viewforum.php?f=41
User avatar
NZChris
Master of Distillation
Posts: 13062
Joined: Tue Apr 23, 2013 2:42 am
Location: New Zealand

Re: silicon tape

Post by NZChris »

diesel1975 wrote:•Thickness (in.): 0.018-0.022
•Width (in.): 0.9375-1.0625
•Dielectric Strength (volts/mil): 400 min.
•Tensile Strength (psi): 700 min.
•Elongation (%): 300 min.
•Bond Strength (lbs.in.): 2.0 min
•Volume Resistivity: 1x10^13 min.
•Water Absorption (%): 3 max.
THIS IS THE SPECS
Those specs tell you nothing about its chemical resistance to the compounds it will be subjected to at distillation temperatures.
User avatar
skow69
Site Donor
Site Donor
Posts: 3230
Joined: Tue Dec 06, 2011 3:03 am
Location: Cascadia

Re: silicon tape

Post by skow69 »

Important when looking up the properties of materials:

SILICON is used to make semiconductors.

SILICONE is the rubbery stuff your tape is made from.
Distilling at 110f and 75 torr.
I'm not an absinthe snob, I'm The Absinthe Nazi. "NO ABSINTHE FOR YOU!"
greggn
Site Donor
Site Donor
Posts: 1380
Joined: Sun Jul 27, 2014 11:59 am
Location: East Coast

Re: silicon tape

Post by greggn »

The backing may be silicone but what's the adhesive ?
________________

I drank fifty pounds of feed-store corn
'till my clothes were ratty and torn
Hound Dog
Master of Distillation
Posts: 3002
Joined: Wed Jul 31, 2013 4:45 pm
Location: Hounds Hollow, VA

Re: silicon tape

Post by Hound Dog »

You must not have done much reading here. I can't believe you mentioned the "S" word and have not been warned of the impending doom that will fall upon you and all those around you.....
dragonfire.jpg
You have been warned!.......
LM Still Operating Instructions
Cranky's New Distiller's Advice
Using Google Search

Drinking Rum before noon makes you a Pirate not an alcoholic.
User avatar
Mikey-moo
Site Donor
Site Donor
Posts: 1498
Joined: Sat Feb 16, 2013 10:54 am

Re: silicon tape

Post by Mikey-moo »

PTFE can help you avoid a fiery doom. A few wraps of PTFE tape and you're golden.
Best place to start for newbies - click here - Courtesy of Cranky :-)

If you have used this site to save money by making your own top quality booze at home then please consider donating a couple of dollars to help keep this site running. Cheers!
User avatar
still_stirrin
Master of Distillation
Posts: 10337
Joined: Tue Mar 18, 2014 7:01 am
Location: where the buffalo roam, and the deer & antelope play

Re: silicon tape

Post by still_stirrin »

diesel,

Just go to the hardware store and buy some plumber's tape. It's PTFE tape and it is very inexpensive (around a buck USD per roll). Getcha' a couple of rolls so you always have some on hand.

Quit trying to "bend the rules"... be safe as advised. Do it right!
ss
My LM/VM & Potstill: My build thread
My Cadco hotplate modification thread: Hotplate Build
My stock pot gin still: stock pot potstill
My 5-grain Bourbon recipe: Special K
rad14701
retired
Posts: 20865
Joined: Wed Dec 19, 2007 4:46 pm
Location: New York, USA

Re: silicon tape

Post by rad14701 »

Without MSDS proof of safety, and lengthy collaboration, nobody here is going to just say "go ahead and use it" about ANY currently unapproved materials... PTFE is the only tape approved at this point, and even that took years of discussions here in these forums... And if it is actual tape, with adhesive, it will never be approved here...
User avatar
shadylane
Master of Distillation
Posts: 10363
Joined: Sat Oct 27, 2007 11:54 pm
Location: Hiding In the Boiler room of the Insane asylum

Re: silicon tape

Post by shadylane »

diesel1975
Sorry for the beating you just took :lol:
But saying silicone, glass thumpers and thermometers on a potstill,,,,,, get's some of the folks here riled up :lol:
User avatar
shadylane
Master of Distillation
Posts: 10363
Joined: Sat Oct 27, 2007 11:54 pm
Location: Hiding In the Boiler room of the Insane asylum

Re: silicon tape

Post by shadylane »

diesel1975 wrote:Has anyone ever used silicon tape to seal a lid on a boiler. I can get my hands on some aircraft electrical tape that is made out of silicon tape called fusion tape. Heat is not an issue with this stuff as it will not melt.
The tape in question is excellent for electrical insulation.
But isn't good for sealing the lid on a moonshine still
mulligan
Bootlegger
Posts: 112
Joined: Thu Sep 29, 2016 6:39 pm

Re: silicon tape

Post by mulligan »

shadylane wrote:diesel1975
Sorry for the beating you just took :lol:
But saying silicone, glass thumpers and thermometers on a potstill,,,,,, get's some of the folks here riled up :lol:
Well since I started off on the wrong foot here I'll be dumb enough to ask ...

How come the adhesive on ptfe tape is considered safe and doesn't cause concern

(before anyone bites my head off, I really want to know and am not trying to start an argument or be otherwise awkward. I 100% intend to always use ptfe washers, gaskets seals etc.)

(edit to say it's the adhesive on ptfe tape I'm confused by, not why ptfe is OK compared to silicon)
User avatar
Bigbob
Site Donor
Site Donor
Posts: 3128
Joined: Sun Jun 22, 2014 2:57 pm
Location: SE Oklahoma

Re: silicon tape

Post by Bigbob »

Ptfe tape has no adhesive.
If you wear underwear then it's a dress!
http://homedistiller.org/forum/viewtopi ... 15&t=62150 How I run a small still
mulligan
Bootlegger
Posts: 112
Joined: Thu Sep 29, 2016 6:39 pm

Re: silicon tape

Post by mulligan »

Bigbob wrote:Ptfe tape has no adhesive.
ahh OK, we only mean plumbers tape for help with joint sealing. There are many ptfe adhesive tapes eg for wrapping cardboard homemade gaskets in so surface is ptfe and can replace a silicon gasket.

Thanks for clarification.

edit http://homedistiller.org/forum/search.p ... tfe+gasket
jb-texshine
Master of Distillation
Posts: 3036
Joined: Thu Feb 12, 2015 12:03 am
Location: Texan living in Missouri

Re: silicon tape

Post by jb-texshine »

If it has adhesive period its out of bounds mulligan. Even for ez gaskets. Anytime you see ptfe on HD it is referring to non adhesive plumbers thread tape. It does stick to itself kinda though,but no adhesives.
Jbt
Remember not to blow yourself up,you only get to forget once!


Deo Vendice

Never eat Mexican food north or east of Dallas tx!
User avatar
cranky
Master of Distillation
Posts: 6505
Joined: Fri Sep 27, 2013 3:18 pm
Location: Pacific Northwest

Re: silicon tape

Post by cranky »

Just for the sake of clarity, What is commonly referred to as F-4 tape (aircraft electrical tape) has no adhesive, it only sticks to itself. It's great stuff for many uses and is resistant to most chemicals but I wouldn't use it on a still because silicone does degrade so PTFE is the better option.
Hound Dog
Master of Distillation
Posts: 3002
Joined: Wed Jul 31, 2013 4:45 pm
Location: Hounds Hollow, VA

Re: silicon tape

Post by Hound Dog »

Since ptfe is teflon, glue does not stick to it. It cannot have an adhesive back for this reason. Buy some and you will see.
LM Still Operating Instructions
Cranky's New Distiller's Advice
Using Google Search

Drinking Rum before noon makes you a Pirate not an alcoholic.
User avatar
der wo
Master of Distillation
Posts: 3817
Joined: Mon Apr 13, 2015 2:40 am
Location: Rote Flora, Hamburg

Re: silicon tape

Post by der wo »

I have here some adhesive ptfe. It is this "extruded" "expanded" or "e-ptfe". The stuff feels like cooked pasta, some of them have a thin strip of glue at the back, some not. I don't use them. It is not better than normal ptfe tape, at least for the places at my still where I use ptfe, because once it is compressed it remains flat and hard like the normal plumbers tape. Unlike silicone or rubber, which would be very helpful for some constructions of course (sight glasses for example).
In this way, imperialism brings catastrophe as a mode of existence back from the periphery of capitalist development to its point of departure. - Rosa Luxemburg
riff42
Swill Maker
Posts: 242
Joined: Wed Aug 23, 2006 5:08 pm
Location: My desk, somewhere in the east of somewhere....

Re: silicon tape

Post by riff42 »

Hound Dog wrote:Since ptfe is teflon, glue does not stick to it. It cannot have an adhesive back for this reason. Buy some and you will see.
Ya sure?

http://catalog.cshyde.com/category/all- ... ptfe-tapes" onclick="window.open(this.href);return false;" rel="nofollow
---
I want my last words to be:
"Hey, this is kind of fun!!"
zapata
Distiller
Posts: 1664
Joined: Fri Jul 07, 2017 1:06 pm

Re: silicon tape

Post by zapata »

Der wo, have you actually tried it or does it just seem unsuitable? At least one member swears by it in multiple builds. Or are there eptfe tapes with more or less elasiticity or memory or whatever it would be called? I'm eyeballing it for a current project hence the question.
Klein
Site Donor
Site Donor
Posts: 202
Joined: Sat Jul 16, 2016 10:03 am
Location: Canada

Re: silicon tape

Post by Klein »

If it has any adhesive then it is not useable, simple as that. No one here is going to say otherwise.
User avatar
der wo
Master of Distillation
Posts: 3817
Joined: Mon Apr 13, 2015 2:40 am
Location: Rote Flora, Hamburg

Re: silicon tape

Post by der wo »

Yes. I tried to seal a flange (from lid to riser) and to seal a cooking pot lid. The flange worked one time very well, but the second time the ptfe layer was too flat. But probably if I had used more of the e-PTFE, it would work. The adhesive layer is very useful, because PTFE normally is very slippery. And I thought it would be ok, because it's only a small strip in the middle, and when compressed, it never would have contact to the alcohol.
To seal the lid was cheaper and more durable with a few wraps of normal teflon tape and the flange I soldered on the lid. The best is to build the still in a way, that you can seal everything without such expensive and perhaps not 100% safe stuff.

zapata, it only compresses, it doesn't go back to the original shape like rubber or silicone does. It feels like cooked pasta, a bit harder. Actually I have sealed the flange once with a spaghetti. It worked better than e-ptfe, because it dries when the lid gets hot and then it sticks very strong. But it worked also only once of course. Same like flour paste would.
Post your plans of your build and we will find a solution without e-PTFE.
In this way, imperialism brings catastrophe as a mode of existence back from the periphery of capitalist development to its point of departure. - Rosa Luxemburg
Post Reply