condensor head

jdpete · Post by **jdpete** » Mon Feb 26, 2007 10:40 am

what would the minimum length need to be for a 2" condensor designed like the Nixon/Stone set-up with pipes within pipes for cooling using a 3000 watt boiler.[/url]

jdpete · Post by **jdpete** » Mon Feb 26, 2007 3:20 pm

Here is the design I am referring to. http://homedistiller.org/detail/STILLHEAD.doc" onclick="window.open(this.href);return false;" rel="nofollow

Post by **bourbonbob** » Mon Feb 26, 2007 3:32 pm

I used 13 foot of 1/4 tube, I rolled it around a 1 1/4 inch pipe, there are about 16-17 wraps and it is about 8 inches in length.

trippvc · Post by **trippvc** » Fri Mar 02, 2007 10:35 pm

i wrapped my 1/4" ar

ound a broom handle then around itself. tripp