OZ Engineering shop for a still

Vapor, Liquid or Cooling Management. Flutes, plates, etc.

Moderator: Site Moderator

Post Reply
Vickypoint
Novice
Posts: 10
Joined: Sat Jul 30, 2005 7:18 pm
Location: By the seaside in Oz

OZ Engineering shop for a still

Post by Vickypoint »

Can the OZ guys on here recommend an Engineering shop they have found to do a good job when welding stainless steel.I want to get a VM knocked up. Please PM details.

Thanks :D
"Experience is a hard teacher because she gives the test first, the lesson afterwards"
Vernon Saunders Law
Top
olddog
retired
Posts: 3618
Joined: Fri Jan 16, 2009 6:16 pm
Location: WEST OZ

Re: OZ Engineering shop for a still

Post by olddog »

East or West
OLD DOG LEARNING NEW TRICKS ......
Top
Vickypoint
Novice
Posts: 10
Joined: Sat Jul 30, 2005 7:18 pm
Location: By the seaside in Oz

Re: OZ Engineering shop for a still

Post by Vickypoint »

East if possible Cane toad land.
"Experience is a hard teacher because she gives the test first, the lesson afterwards"
Vernon Saunders Law
Top
olddog
retired
Posts: 3618
Joined: Fri Jan 16, 2009 6:16 pm
Location: WEST OZ

Re: OZ Engineering shop for a still

Post by olddog »

Perhaps someone in Banana bending land could respond, it might be easier to get one built in copper than stainless steel too.
OLD DOG LEARNING NEW TRICKS ......
Top
Stimson
Novice
Posts: 27
Joined: Mon Sep 28, 2009 3:07 am
Location: SE Qld

Re: OZ Engineering shop for a still

Post by Stimson »

In Brisbane try SIMPLY STAINLESS at 29-31 Timms Rd, Everton Hills 0412 159 232. Harry will help you out with your welding needs. He does a very good job. I had him help me out.
Top
Post Reply

Return to “Column Builds”