My Completed Boka

Post your builds here.

Moderator: Site Moderator

Post Reply
mozzie26
Novice
Posts: 34
Joined: Thu Jun 17, 2010 12:36 am
Location: Oz

My Completed Boka

Post by mozzie26 »

Here is my completed Boka, There like A***holes, every ones got one! :lol:
Got my first batch of BW going, it has gone from 1.074 to 1.030 in two days.

Image
Austin Nichols
Rumrunner
Posts: 723
Joined: Thu Jun 24, 2010 8:57 pm
Location: Dow nunda QLD

Re: My Completed Boka

Post by Austin Nichols »

Looking good Mozz :wink:

Everyone's got one because they work mate, and you will enjoy yours too.

Nice work!

Cheers.
SuburbanStiller
Swill Maker
Posts: 163
Joined: Tue Oct 12, 2010 11:11 pm

Re: My Completed Boka

Post by SuburbanStiller »

That's a purdy rig, bet it works a champ. Electric element?
LWTCS wrote:Recon i am an intermet lilker geek
mozzie26
Novice
Posts: 34
Joined: Thu Jun 17, 2010 12:36 am
Location: Oz

Re: My Completed Boka

Post by mozzie26 »

SuburbanStiller wrote:That's a purdy rig, bet it works a champ. Electric element?
Yeah electric 2200w.
docdave
Bootlegger
Posts: 148
Joined: Mon Aug 23, 2010 1:44 pm

Re: My Completed Boka

Post by docdave »

mozzie,

Is that pump quiet and if so, what type and flow rate is it?

DocDave
blanikdog
Angel's Share
Angel's Share
Posts: 4545
Joined: Tue Aug 09, 2005 11:55 pm
Location: Bullamakanka, Oztrailya

Re: My Completed Boka

Post by blanikdog »

Yairsss mozzie, Nice work. Boka's are very popular because as Austin said, 'they work'.

Stay Safe
Simple potstiller. Slow, single run.
(50 litre, propane heated pot still. Coil in bucket condenser - No thermometer, No carbon)
The Reading Lounge AND the Rules We Live By should be compulsory reading

Cumudgeon and loving it.
mozzie26
Novice
Posts: 34
Joined: Thu Jun 17, 2010 12:36 am
Location: Oz

Re: My Completed Boka

Post by mozzie26 »

docdave wrote:mozzie,

Is that pump quiet and if so, what type and flow rate is it?

DocDave
Pump makes a bit of noise( about as load as a car idling). Got it off ebay for $35AUS plus postage. Pumps way more then the still requires, I just have about 80% flowing back to the tank so the pump doesn't get loaded up. Most the pumps I was looking at were submersible and I wanted something that could suck.

Power 370W / 0.5HP
Maximum Capacity 35 litres/min
Maximum Head 35 metre
Maximum Suction 9 metre
Speed 2850 RPM
Inlet/Outlet pipe size 1 inch
Power Single-phase voltage 240V
Frequency 50 Hz
Maximum Pressure 10 Bar
Fluid Temperature Up to 80° C
Max. Ambient Temperature Up to 40° C
Cord Length 1 metre
Net Weight 5.8 kg
Gross Weight 6.2 kg
Post Reply