first SF run in pot still

Many like to post about a first successful ferment (or first all grain mash), or first still built/bought or first good run of the still. Tell us about all of these great times here.
Pics are VERY welcome, we drool over pretty copper 8)

Moderator: Site Moderator

Post Reply
swamper
Novice
Posts: 13
Joined: Sat Aug 11, 2012 7:57 am

first SF run in pot still

Post by swamper »

I just finished my first run in pot still mode ( I actuay used my top part of my reflux column with copper packing and only the out flow condenser)
i got 11 jars (1/2 pint about 2/3 full)
the abv was 70,65,58,58,53,45,40,35,30,25,20... threw out 250ml foreshots.
all of the jars smell pretty good the first couple have a sharper smell but I don't know if it is the heads or just because it is more alchol. the last jar didn't really smell any different but I culd see a very light oily film if you held it just right to the light.
should I keep all of this? mix it togather or just keep the middle 4 or 5 jars? Any advise would be appreciated
beowoulfe
Novice
Posts: 97
Joined: Mon Aug 29, 2011 6:17 am
Location: It's sunny here

Re: first SF run in pot still

Post by beowoulfe »

I keep the middle stuff for aging. The rest goes into the feints jar. Feint runs generate some very tasty whiskey when run on their own, for me anyway.
"Patriotism is supporting your country all the time and your government when it deserves it."
--Mark Twain
dakotasnake
Rumrunner
Posts: 680
Joined: Sun Dec 19, 2010 5:38 am
Location: south dakota

Re: first SF run in pot still

Post by dakotasnake »

beowoulfe wrote:I keep the middle stuff for aging. The rest goes into the feints jar. Feint runs generate some very tasty whiskey when run on their own, for me anyway.
plus 1 on that. keep the middle goodies and stash the rest for a future all feints run. the oily stuff is fusal oils from deep in the tails, its worth stashing to. when ya got enuff for a boiler charge saved up dilute with water to under 40abv and rerun it. it will make a fine drop. i have found if ya age the SF on white oak for a 6 mos. then remove the oak and let sit for another 6 mos. its smooth as silk.
today marks the dawn of a new error.
swamper
Novice
Posts: 13
Joined: Sat Aug 11, 2012 7:57 am

Re: first SF run in pot still

Post by swamper »

thanks for the info guys.
how much would you consider the middle or hearts of the run? I'm not a big drinker, just doing this for the education and fun of learning somthing new. I can tell a difference in the smells this morning but I tasted all the jars and they all tasted pretty much the same to me. Is there an ABV that I could use to determine the hearts?
HolyBear
Distiller
Posts: 1600
Joined: Sun Mar 04, 2012 3:23 am
Location: Prolly diggin through Dnders posts

Re: first SF run in pot still

Post by HolyBear »

Hey there swamper. Give this a read to better understand... http://homedistiller.org/forum/viewtopi ... 15&t=11640

And here's an oldy but goody... http://homedistiller.org/forum/viewtopi ... 46&t=13305
"They who can give up essential liberty to obtain a little temporary safety deserve neither liberty nor safety." Benjamin Franklin
beowoulfe
Novice
Posts: 97
Joined: Mon Aug 29, 2011 6:17 am
Location: It's sunny here

Re: first SF run in pot still

Post by beowoulfe »

swamper wrote:thanks for the info guys.
how much would you consider the middle or hearts of the run?
Something you have to figure out yourself. I tasted and tested many batches and now I know to keep a half gallon for aging and a half gallon for feints on a 5 gal charge. But that is my still and I know how it runs. I probably put some good stuff into the feints jar, but I know I will get it back a little down the road. I like feints run whiskey!
"Patriotism is supporting your country all the time and your government when it deserves it."
--Mark Twain
swamper
Novice
Posts: 13
Joined: Sat Aug 11, 2012 7:57 am

Re: first SF run in pot still

Post by swamper »

when you run the feints do you run it in pot still mode? also since I have thrown out the fore shots do you still have to do that on the feints run? I kept the middle 4 jars (2 pints) and put the rest aside to run again when I get enough
beowoulfe
Novice
Posts: 97
Joined: Mon Aug 29, 2011 6:17 am
Location: It's sunny here

Re: first SF run in pot still

Post by beowoulfe »

That's all that I have is a pot still.

I still take a little fores off like 4oz instead of 8, best not to be greedy.

A full boiler charge of feints gets a LOT more usable product than a straight spirit run of a wash, surprisingly more. And HOT, as in ABV. My pot puts out 135 ABV on a wash run and 160 ABV on a feint run (at first anyway, drops slowly as the run progresses).
"Patriotism is supporting your country all the time and your government when it deserves it."
--Mark Twain
swamper
Novice
Posts: 13
Joined: Sat Aug 11, 2012 7:57 am

Re: first SF run in pot still

Post by swamper »

well, I have a 2nd gneration batch ready. I'm going to run it then run what I get back through along with the feints from the first run. I'll let you know how it comes out
swamper
Novice
Posts: 13
Joined: Sat Aug 11, 2012 7:57 am

Re: first SF run in pot still

Post by swamper »

well, I did a stripping run then ran the results with the feints frome tha first run. it came out really good, I could really tell the differents smells in the heads, hearts and tails. should I just keep the heads and tails and run with the next batch?
Post Reply