Water pumps

Anything cooling/condenser related.

Moderator: Site Moderator

Post Reply
holliday
Bootlegger
Posts: 129
Joined: Sun Nov 18, 2012 8:53 pm

Water pumps

Post by holliday »

What kind of water pumps do you all use for your condenser and how many gph?
User avatar
Coyote
retired
Posts: 1649
Joined: Fri Apr 03, 2009 3:13 pm
Location: Oregon

Re: Water pumps

Post by Coyote »

I run a 134 GPH 120 Volt pond pump on top of a 55 gallon barrel

Coyote
"Slow Down , You'll get a more harmonious outcome"
"Speed & Greed have no place in this hobby"
holliday
Bootlegger
Posts: 129
Joined: Sun Nov 18, 2012 8:53 pm

Re: Water pumps

Post by holliday »

Coyote wrote:I run a 134 GPH 120 Volt pond pump on top of a 55 gallon barrel

Coyote
What size condenser do you have?
HolyBear
Distiller
Posts: 1600
Joined: Sun Mar 04, 2012 3:23 am
Location: Prolly diggin through Dnders posts

Re: Water pumps

Post by HolyBear »

It will depend mainly on the column height if you have a reflux still... pumps are rated on how high they will pump and amount at that height. Little bit of advise would be to over buy because they do get week over time. So, say your keg is on top of a turkey fryer, tower on top of that, and reflux inlet is 7'... get one that will pump to atleast 9', 12' would be better...
"They who can give up essential liberty to obtain a little temporary safety deserve neither liberty nor safety." Benjamin Franklin
User avatar
heynonny
Swill Maker
Posts: 464
Joined: Fri Jun 06, 2008 7:17 am
Location: SoCal

Re: Water pumps

Post by heynonny »

I use a bilge pump @ about 300 gph as i recall. At the boat place for about $50 six years ago. Still going strong, they sell parts, ie new impellers, motors, the base housing even. Run it off a 12 v battery charger with an amp gauge, no prime = about 1/2 amp or less, (needle barely moves off peg) when pumping agua = about 2 amps. I know when I have flow. -hey-
  
 
 
       Oh,look!! Its a hole in the space-time contuum!!
marshrunner757
Swill Maker
Posts: 207
Joined: Sun Jul 24, 2011 7:51 am
Location: Louisiana

Re: Water pumps

Post by marshrunner757 »

I use a 50 psi on demand 12v pump powered with battery charger with an inline ball valve to control flow. Close the valve, pump shuts off, open valve wide open and it runs wide open and anything in between.

Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Post Reply