On Track with Copper Lengths

Putting older posts here. Going to try to keep the novice forum pruned about 90 days work. The 'good' old stuff is going to be put into appropriate forums.

Moderator: Site Moderator

Post Reply
Doc Stonewall
Novice
Posts: 1
Joined: Tue Jan 15, 2013 2:13 pm

On Track with Copper Lengths

Post by Doc Stonewall »

HI guys,

I wanted to make sure I'm on track with my copper dimensions before I finish soldering her up. Both the condenser and column (2") are 2 1/2 feet long. She'll be mounted on a full size keg and heated by a propane burner. Any help is greatly appreciated.

Thanks,
Doc
Attachments
Still Mock-up.jpg
Top
Prairiepiss
retired
Posts: 16571
Joined: Sat Dec 18, 2010 7:42 am
Location: Somewhere in the Ozarks

Re: On Track with Copper Lengths

Post by Prairiepiss »

Looks fine to me. As long as it puts the take off where you want it. It should do a great job.
It'snotsocoldnow.

Advice For newbies by a newbie.
CM Still Mods
My Stuffs
Fu Man

Mr. Piss
That's Princess Piss to the haters.
Top
Post Reply

Return to “Novice Forum Graveyard”