Ujssm question ?

Grain bills and instruction for all manner of alcoholic beverages.

Moderator: Site Moderator

Post Reply
bht9665
Novice
Posts: 79
Joined: Mon Dec 10, 2012 4:33 am

Ujssm question ?

Post by bht9665 »

I am on my 8 generation of ujssm. I have never had a problem with any of my ferments. This last ferment didn't start very fast and is bubbling very slow. I wonder if my ph is to low and I should put something in my next ferment. Any thoughts?
just-a-sip
Rumrunner
Posts: 660
Joined: Wed Nov 24, 2010 3:31 pm

Re: Ujssm question ?

Post by just-a-sip »

bht9665 wrote:I am on my 8 generation of ujssm. I have never had a problem with any of my ferments. This last ferment didn't start very fast and is bubbling very slow. I wonder if my ph is to low and I should put something in my next ferment. Any thoughts?
i know some guys who swear they go deeper, however i have never been able to get real successful after 7 or 8 gens.. that's about as deep as i go and yess your PH may be off by now. if you dont get all the Alcohol out of the fermenter, add to much backset back, or let ferment dry, you can definitely mess up the pH
Just-A-Sip
wineboxwilly
Novice
Posts: 8
Joined: Sat Apr 06, 2013 10:56 am

Re: Ujssm question ?

Post by wineboxwilly »

Can the PH be adjusted back at this point? or is it better to just restart a new batch?
Fastill
Trainee
Posts: 898
Joined: Sat Mar 13, 2010 6:28 pm
Location: Where we drink more beer than you!

Re: Ujssm question ?

Post by Fastill »

wineboxwilly wrote:Can the PH be adjusted back at this point? or is it better to just restart a new batch?
If you have been replacing spent corn you could save it a couple ways. I use calcium carbonate from the brewstore to bring my ph back up to a reasonable number, and I use alot more backset than the recipe calls for.
You could also just use almost no backset for a generation, a sweet run so to say, and start over with fresh yeast. You could wash your corn of old yeast, sort of a cleanup in your fermenter. I try not to let the yeast sludge build up too much because I think it may shield some of the corn from the sugary fermenting liquid, hiding the nutrients.
Or you could just start over if corn is cheap and easy to get for you.
Good luck, I hope you can save it.
A.D.D. and HD don't go together. This hobby takes time and dedication to learn and do it right and safe.
Fill the pool before you jump in head first!
http://homedistiller.org/forum/viewtopi ... 15&t=52975
wineboxwilly
Novice
Posts: 8
Joined: Sat Apr 06, 2013 10:56 am

Re: Ujssm question ?

Post by wineboxwilly »

I just drained my fermenter on my latest run. What I noticed was that I was leaving almost a gallon of mash in with my corn because I was only siphoning it off to the top of my corn, add that to the 25% or 1 gallon of backset and I think I was getting into too much backset/mash and not enough fresh. I gave it a real good aeration and a stir so I will let you know if its come back full force. I am a little less then 25% on this one so it will be a tad sweeter.
Post Reply