So, the small brewer wasnt cutting it. I was given a 15.5 gl keg with 12 year old beer in it. now this is my first ever experience with a keg so I had no idea after 12 years it would have pressure..and beer.. so I innocently push down on the ball valve, and took a amber hopps shower at about 150 PSI and beer shot about 20' in the air and when I thought it was all done, WRONG, i pulled the snap ring and the assembly inside near took my head off
then I get it all empties out after the wife is done LHFAO and I pull the snap ring, and assembly, then I dump what little is left and not soaked into my clothes, and start filling it with HOT soapy water to start the cleaning process. Man I stink like a drunk right now! Shes still LHFAO
image.jpeg
image2.jpeg
image3.jpeg
image4.jpeg
so, now to decide what kind of standpipe to make? does it need (or matter) if its water cooled or is coiled into a bucket of ice just fine? does it make a difference? My WHOLE goal is to make good bourbon not shine. so I'm hoping for the best build from here on to make it right!
You do not have the required permissions to view the files attached to this post.
