Big shout out to all of you builders out there for sharing
This is a rendering of my simple potstill with liebig and thumper. Sorry, no photos yet.
It's based on a 15.5g keg with 5500w element and phase angle contoller.
I've included plans for a thumper (that I have not built yet) to be built into a poney keg.
It's designed to be partly modular... Can be used with/without thumper for stripping/spirit runs.
Any comments welcome
CAD rendering and specs of potstill with thumper
Moderator: Site Moderator
-
Tap
- Swill Maker
- Posts: 250
- Joined: Thu Sep 05, 2013 4:13 pm
CAD rendering and specs of potstill with thumper
You do not have the required permissions to view the files attached to this post.
Too much of anything is bad, but too much good whiskey is barely enough