new electric element heating, whistling normal?

If it plugs in, post it here.

Moderator: Site Moderator

Post Reply
FtW
Novice
Posts: 56
Joined: Sun Jun 15, 2014 1:13 pm

new electric element heating, whistling normal?

Post by FtW »

Have the new 4500w electric in, controller is the SD DIY controller. When I finished it I tested with some plain water in the boiler, no shocks, controller controlled it properly & it was at a rolling boil in under 1/2 an hour.

Now filled it with 6 gallons of 40% low wines for the first real test, & with the column on the thing is whistling like a kettle within 30 seconds of firing it up, just concerned if this is normal.
User avatar
shadylane
Master of Distillation
Posts: 11521
Joined: Sat Oct 27, 2007 11:54 pm
Location: Hiding In the Boiler room of the Insane asylum

Re: new electric element heating, whistling normal?

Post by shadylane »

Water, mash and low-wines sound different, when heating up.
Don't know why, but they do.
FtW
Novice
Posts: 56
Joined: Sun Jun 15, 2014 1:13 pm

Re: new electric element heating, whistling normal?

Post by FtW »

All good, just did the whistle for a few minutes as it was heating up, so guessing it was normal. Just the sound of a boiling pot now.

It is quick, barely 15 min to get up to running temps, I'm happy!
User avatar
shadylane
Master of Distillation
Posts: 11521
Joined: Sat Oct 27, 2007 11:54 pm
Location: Hiding In the Boiler room of the Insane asylum

Re: new electric element heating, whistling normal?

Post by shadylane »

If the sound a pot makes coming up to temp makes you worry, add a thumper :!:
You won't, stop and ask, you'll kill the power and run.
Post Reply