Eck
New equipment, AG is my destination :)
Moderator: Site Moderator
-
WooTeck
- Distiller
- Posts: 1775
- Joined: Thu Apr 24, 2014 1:37 am
- Location: scotland
New equipment, AG is my destination :)
ive just ordered 3 60l fermenting bins 2 with taps and bubbler grommets and one with out. plan is to convert them to supper sized mash tuns/ fermenters. plan being get some smaller vessels that fit inside and can contain my entire grain bill. ill then drill lots of little holes in to the smaller ones and use them like a tea infuser. anyone done this and have any tips?
Eck
Eck
-
Bushman
- Admin
- Posts: 18553
- Joined: Tue Mar 30, 2010 5:29 am
- Location: Pacific Northwest
Re: New equipment, AG is my destination :)
No tips but pictures and progress of your build would be nice for others.
-
WooTeck
- Distiller
- Posts: 1775
- Joined: Thu Apr 24, 2014 1:37 am
- Location: scotland
Re: New equipment, AG is my destination :)
Of corse, ill be posting as pictures and documenting progress. win or fail there is a potential to help others
eck
eck
-
WooTeck
- Distiller
- Posts: 1775
- Joined: Thu Apr 24, 2014 1:37 am
- Location: scotland
Re: New equipment, AG is my destination :)
every thing has arrived.
so hears the pictures.
you could go for a symmetrical good to look at pattern but i thought fuck it and attacked it with my drill. should work the same ether way. going to fire it up tonight and get some all grain bourbon on the go.
will be moving to another thread for the recipe and steps. then come back and review how the hardware worked out. wish me luck
eck
so hears the pictures.
you could go for a symmetrical good to look at pattern but i thought fuck it and attacked it with my drill. should work the same ether way. going to fire it up tonight and get some all grain bourbon on the go.
will be moving to another thread for the recipe and steps. then come back and review how the hardware worked out. wish me luck
eck
You do not have the required permissions to view the files attached to this post.
-
WooTeck
- Distiller
- Posts: 1775
- Joined: Thu Apr 24, 2014 1:37 am
- Location: scotland
Re: New equipment, AG is my destination :)
ive found that 7.5 kgs of grain after swelling fill the 25 liter tub so your better of trying to build a false bottom. fortunately the tub wont go to wasted just re-purposed for brewing beer.
the thread for the recipe and steps on the road to AG
eck
the thread for the recipe and steps on the road to AG
eck
-
WooTeck
- Distiller
- Posts: 1775
- Joined: Thu Apr 24, 2014 1:37 am
- Location: scotland
Re: New equipment, AG is my destination :)
after attempting to drain the barrel ive discover it trickles out at about 10min/l(probably not accurate but it wasn't good enough). so ive devised a back up plan where i use hose with many holes drilled in. 22mm x3/4"bsp female coupler. screw it on to the tap and go.
eck
eck
You do not have the required permissions to view the files attached to this post.
-
rager
- Distiller
- Posts: 1584
- Joined: Wed Feb 20, 2013 4:52 pm
Re: New equipment, AG is my destination :)
people are doing the same with copper pipe and elbows. they cut slits with a hack saw. nothing is soldered for easy cleaning. I believe jimbo has a thread about plus others. look in the still accessories threadsWooTeck wrote:after attempting to drain the barrel ive discover it trickles out at about 10min/l(probably not accurate but it wasn't good enough). so ive devised a back up plan where i use hose with many holes drilled in. 22mm x3/4"bsp female coupler. screw it on to the tap and go.
eck