from nz new s/s collom buld

tuf720 · Post by **tuf720** » Fri Jul 17, 2015 2:24 am

well here is my old set up ,wanted to lear how to an mod from the get go

started with stuff

boliler started

coolers started

defagulater started

the copper pron started for reflulux

tiged copper

start of the bodey

geting there mock up

were im at now so geting there thanks all

Post by **Danespirit** » Fri Jul 17, 2015 2:27 am

Greetings...and welcome in.

Wow..! I can see you got some skills..

You have got yourself a beauty there..but in a welcome thread most just gives a introduction of themselves.
Those pictures would belong in a buildthread...just saying..

Post by **emptyglass** » Sat Jul 18, 2015 6:58 am

nice stuff tuff, a lot of us started with a similar rig

tuf720 · Post by **tuf720** » Tue Jul 28, 2015 11:08 pm

little progress

tuf720 · Post by **tuf720** » Fri Jul 31, 2015 12:57 am

started a in line thumper
half way there no return line yet but soon

Post by **BoomTown** » Fri Jul 31, 2015 3:18 am

wish you lived a little closer to VA, we'd be talking about a build for me. Beautiful work, and love the design and concept.

tuf720 · Post by **tuf720** » Sat Aug 01, 2015 3:55 pm

BoomTown wrote:wish you lived a little closer to VA, we'd be talking about a build for me. Beautiful work, and love the design and concept.

heres hopeing the design works and need to lear how to run it

tuf720 · Post by **tuf720** » Tue Aug 04, 2015 1:03 am

think i need a bigger shed the thumper ads a bit now will have to run it tho the man hole in the roof

Post by **emptyglass** » Tue Aug 04, 2015 7:47 am

I tip my hat to anyone that uses their skills to make a quality item like that tuff.

who cares if you need a ladder

Post by **bearriver** » Tue Aug 04, 2015 8:23 am

The dimples on the column where the sight glasses fit are gorgeous. Nice work.

Post by **FreeMountainHermit** » Tue Aug 04, 2015 8:34 am

I'd be interested in hearing how the dimples were made.

Hydro-forming is pretty much done in a production atmosphere so I'm thinking tuf720 made a die of some sort

Beautiful work.

Carry on ,Sir.

InglisHill · Post by **InglisHill** » Tue Aug 04, 2015 1:15 pm

I believe it was a die press from his mates shop down the road, I'd bet we all wish we had mates like that.

It would look fuckin mean on a copper column as well.

Post by **FreeMountainHermit** » Tue Aug 04, 2015 1:35 pm

I googled tri clamp manifold and came up with some 1 1/2 but nothing as large as what the OP has.

tuf720 · Post by **tuf720** » Tue Aug 04, 2015 11:31 pm

InglisHill wrote:I believe it was a die press from his mates shop down the road, I'd bet we all wish we had mates like that.

It would look fuckin mean on a copper column as well.

your sure right my frend inglishill ill ask if they do copper or can do its

Post by **thecroweater** » Tue Aug 04, 2015 11:39 pm

ok it looked like some kind of branch puller work to me

Post by **pfshine** » Tue Aug 04, 2015 11:52 pm

A t-drill does the job a treat.

Post by **pfshine** » Wed Aug 05, 2015 12:01 am

I would give somebody's right but for this.http://m.ebay.com/itm/T-Drill-T-55-Copp ... nav=SEARCH" onclick="window.open(this.href);return false;" rel="nofollow

tuf720 · Post by **tuf720** » Thu Aug 06, 2015 11:21 pm

return line for thumper started

not long now

tuf720 · Post by **tuf720** » Mon Aug 24, 2015 2:26 am

geting there

got glass

tuf720 · Post by **tuf720** » Fri Sep 04, 2015 1:05 am

bit off a weld up in line thumper

tried my hand a polishing s/s it suxs takes to much time

Post by **bentstick** » Fri Sep 04, 2015 1:31 pm

thecroweater wrote: ok it looked like some kind of branch puller work to me

ya maybe right Crow! Damn ya learn something new everyday! YA?

Tokoroa_Shiner · Post by **Tokoroa_Shiner** » Fri Sep 04, 2015 1:39 pm

bentstick wrote:
thecroweater wrote: ok it looked like some kind of branch puller work to me

ya maybe right Crow! Damn ya learn something new everyday! YA?

It's from a die press

Post by **bentstick** » Fri Sep 04, 2015 2:41 pm

Thank you for the correction! My apologies!

tuf720 · Post by **tuf720** » Sat Sep 12, 2015 1:07 am

lucky the plaster in the shed is in need off re doing home now just wateing on the brews to finish and then 1st run tho

[bg=][/bg]

Post by **pfshine** » Wed Sep 23, 2015 1:32 pm

Well how did she work for ya. Any problems? How many lph and at what percent? And don't feel bad, your not the first to cut a hole in the ceiling.

tuf720 · Post by **tuf720** » Wed Sep 23, 2015 10:55 pm

pfshine wrote:Well how did she work for ya. Any problems? How many lph and at what percent? And don't feel bad, your not the first to cut a hole in the ceiling.

been a hold up with the controller so hopeing to do 1st run in 2 or 3 days

tuf720 · Post by **tuf720** » Sun Oct 04, 2015 5:24 pm

well the wash was a little average and i was laying round on how to run it and did ok but should be better but usd this was a clean run
heres a pic of the control pannle

vid off it running as i sad bit more practice

kiwi Bruce · Post by **kiwi Bruce** » Sun Oct 04, 2015 5:37 pm

BLOODY OATH MATE !! that is one hell of a build there Tuf from Hamilton ! ! Kiwi Bruce

tuf720 · Post by **tuf720** » Sun Oct 04, 2015 10:32 pm

kiwi Bruce wrote:BLOODY OATH MATE !! that is one hell of a build there Tuf from Hamilton ! ! Kiwi Bruce

cheers bruce now better get a nothe brw going

Monkeyman88 · Post by **Monkeyman88** » Mon Oct 05, 2015 12:09 am

Very nice. Looks like will run good.

Home Distiller

from nz new s/s collom buld

from nz new s/s collom buld

Re: from nz new giy

Re: from nz new s/s collom buld

Re: from nz new s/s collom buld

s/s column buld from nz with thumper

Re: from nz new s/s collom buld

Re: from nz new s/s collom buld

Re: from nz new s/s collom buld

Re: from nz new s/s collom buld

Re: from nz new s/s collom buld

Re: from nz new s/s collom buld

Re: from nz new s/s collom buld

Re: from nz new s/s collom buld

Re: from nz new s/s collom buld

Re: from nz new s/s collom buld

Re: from nz new s/s collom buld

Re: from nz new s/s collom buld

Re: from nz new s/s collom buld

Re: from nz new s/s collom buld

Re: from nz new s/s collom buld

Re: from nz new s/s collom buld

Re: from nz new s/s collom buld

Re: from nz new s/s collom buld

Re: from nz new s/s collom buld

Re: from nz new s/s collom buld

Re: from nz new s/s collom buld

Re: from nz new s/s collom buld

Re: from nz new s/s collom buld

Re: from nz new s/s collom buld

Re: from nz new s/s collom buld