Christmas Build
Moderator: Site Moderator
- Oldvine Zin
- Distiller
- Posts: 2457
- Joined: Sat Jun 06, 2015 9:16 pm
- Location: Pacific Northwest
Christmas Build
Well I think that the build will go way past Christmas but most of the parts are Christmas presents to myself. ( Sounded like good reasoning to the soh ) Thinking about a 4" flute. Spent a little time online ordering parts and the first box of shinny stainless showed up today 
You do not have the required permissions to view the files attached to this post.
- bearriver
- Master of Distillation
- Posts: 4442
- Joined: Fri Nov 22, 2013 10:17 pm
- Location: Western Washington
Re: Christmas Build
4" flute, the king of the hobby arena.
Way to go Olvine Zin! Nice project
Way to go Olvine Zin! Nice project
- Badmotivator
- Angel's Share

- Posts: 937
- Joined: Tue Jan 20, 2015 9:01 pm
- Location: Oregon
Re: Christmas Build
I'll be following along, Zin. Looks like you've got some 4s, some 3s and some 2s there?
Trying to make it real compared to what?
The Badmotivator Bain-Marie and Oak Barrel
Badmotivator Barrel Construction, Start to Finish
The Badmotivator Bain-Marie and Oak Barrel
Badmotivator Barrel Construction, Start to Finish
- BoisBlancBoy
- Distiller
- Posts: 1165
- Joined: Wed Mar 27, 2013 7:17 pm
- Location: Tip of the Mitt
Re: Christmas Build
Ill be looking forward to seeing it's progress, even though I may be a bit jealous!
- Oldvine Zin
- Distiller
- Posts: 2457
- Joined: Sat Jun 06, 2015 9:16 pm
- Location: Pacific Northwest
Re: Christmas Build
Yup, planning on a modular 4" plated column, 2" - long sweep 180 to a 3" shotgun. Should be a fun build!!Badmotivator wrote:I'll be following along, Zin. Looks like you've got some 4s, some 3s and some 2s there?
- Oldvine Zin
- Distiller
- Posts: 2457
- Joined: Sat Jun 06, 2015 9:16 pm
- Location: Pacific Northwest
Re: Christmas Build
More parts at my doorstep today
Not sure if I want to use these for 1 1/2" sight glasses or go with larger tri clover ones
Not sure if I want to use these for 1 1/2" sight glasses or go with larger tri clover ones
You do not have the required permissions to view the files attached to this post.
- Swedish Pride
- Master of Distillation
- Posts: 2870
- Joined: Tue Aug 26, 2014 2:16 am
- Location: Emerald Isle
- Oldvine Zin
- Distiller
- Posts: 2457
- Joined: Sat Jun 06, 2015 9:16 pm
- Location: Pacific Northwest
Re: Christmas Build
Today's delivery - shiny copper plates 
You do not have the required permissions to view the files attached to this post.
-
Deerhunter
- Swill Maker
- Posts: 477
- Joined: Sun Jan 27, 2013 10:01 pm
- Location: New York
Re: Christmas Build
what fitting you using for the sight glasses?
Sky Diving without a parachute is a once in a life time experience!
- Oldvine Zin
- Distiller
- Posts: 2457
- Joined: Sat Jun 06, 2015 9:16 pm
- Location: Pacific Northwest
Re: Christmas Build
Still undecided on the glass holders, going with a 2" tri clamp would be easy but I kind of like the look of the trap adapter - they are a little more streamline and copperDeerhunter wrote:what fitting you using for the sight glasses?
- Oldvine Zin
- Distiller
- Posts: 2457
- Joined: Sat Jun 06, 2015 9:16 pm
- Location: Pacific Northwest
Re: Christmas Build
Came home tonight to a couple more packages - it still feels like Christmas 
First one from McMaster - 1 3/4" boro sight glass, they are a perfect fit on the trap adapters - smaller than using 2" tri clover fittings but I like the more streamline look of them.
Next big box - Thank-you Kentucky shiner!
a shiny 3 to 4 adapter to fit my keg and a 3' piece of 4"

And a boring little box with a pound of Harris solder and flux - I think that those big tubes are going to eat up a lot of solder.
First one from McMaster - 1 3/4" boro sight glass, they are a perfect fit on the trap adapters - smaller than using 2" tri clover fittings but I like the more streamline look of them.
Next big box - Thank-you Kentucky shiner!
a shiny 3 to 4 adapter to fit my keg and a 3' piece of 4"
And a boring little box with a pound of Harris solder and flux - I think that those big tubes are going to eat up a lot of solder.
You do not have the required permissions to view the files attached to this post.
- Oldvine Zin
- Distiller
- Posts: 2457
- Joined: Sat Jun 06, 2015 9:16 pm
- Location: Pacific Northwest
Re: Christmas Build
I stumbled upon an 8' long 3" copper tube at almost scrap price
part of that will be my shotgun condenser
You do not have the required permissions to view the files attached to this post.
- Oldvine Zin
- Distiller
- Posts: 2457
- Joined: Sat Jun 06, 2015 9:16 pm
- Location: Pacific Northwest
Re: Christmas Build
Started work on the sight glass holders:
made this jig
needs a little finish work, but not bad for the first cut
made this jig
needs a little finish work, but not bad for the first cut
You do not have the required permissions to view the files attached to this post.
- Snackson
- Rumrunner
- Posts: 516
- Joined: Mon Jun 23, 2014 8:03 pm
- Location: PNW
Re: Christmas Build
Following along with interest, looking nice so far. Where did you get the trap adapters?
- corene1
- HD Distilling Goddess
- Posts: 3053
- Joined: Tue Jan 08, 2013 8:05 pm
- Location: The western Valley
Re: Christmas Build
That sure is a whole bunch of shiny stainless. Are you going to go modular with your column? Looking forward to watching the build.
- Oldvine Zin
- Distiller
- Posts: 2457
- Joined: Sat Jun 06, 2015 9:16 pm
- Location: Pacific Northwest
Re: Christmas Build
Snackson wrote:Following along with interest, looking nice so far. Where did you get the trap adapters?
Supply house dot com - search for 1-1/2" Copper DWV Fitting Trap Adapter (FTG x Slip Joint) less than $9 apiece and:
McMaster car for Heat-Resistant Borosilicate Glass, 1-3/4" Diameter, 3/16" Thick, also less than $9 each
- Oldvine Zin
- Distiller
- Posts: 2457
- Joined: Sat Jun 06, 2015 9:16 pm
- Location: Pacific Northwest
Re: Christmas Build
corene1 wrote:That sure is a whole bunch of shiny stainless. Are you going to go modular with your column? Looking forward to watching the build.
Yes 5 separate removable plate assemblies is the plan.
- Oldvine Zin
- Distiller
- Posts: 2457
- Joined: Sat Jun 06, 2015 9:16 pm
- Location: Pacific Northwest
Re: Christmas Build
Did the rough cuts on my sight glass holders today while babysitting a strip run of a Booners casual corn sugar head
You do not have the required permissions to view the files attached to this post.
-
googe
- retired
- Posts: 3914
- Joined: Wed Jun 20, 2012 6:53 pm
- Location: awwstralian in new zealund
Re: Christmas Build
Nice work.mate, love the jig
. Nice adapters too!. Good luck with the rest of it.
Here's to alcohol, the cause of, and solution to, all life's problems.
"Homer J Simpson"
"Homer J Simpson"
- moosemilk
- Master of Distillation
- Posts: 2662
- Joined: Tue Mar 18, 2014 10:47 am
Re: Christmas Build
Love the build so far! Debating on going with sight glass like yours or tri-clamp 2". I was originally going to go with tri-clamp, but now you have me thinking more because yours also looks nice. Do you know if those parts can be had for 2" sight glass?
- Oldvine Zin
- Distiller
- Posts: 2457
- Joined: Sat Jun 06, 2015 9:16 pm
- Location: Pacific Northwest
Re: Christmas Build
Yea I'm still debating on what style to use, the largest size trap adapter is the 1 1/2", tri clamps will give a larger sight glass at the sacrifice of a bazillion more tri clamp fittings. My build as it is has many and just trying to break it up with a few lessmoosemilk wrote:Love the build so far! Debating on going with sight glass like yours or tri-clamp 2". I was originally going to go with tri-clamp, but now you have me thinking more because yours also looks nice. Do you know if those parts can be had for 2" sight glass?
- moosemilk
- Master of Distillation
- Posts: 2662
- Joined: Tue Mar 18, 2014 10:47 am
Re: Christmas Build
Oldvine Zin wrote:
Yea I'm still debating on what style to use, the largest size trap adapter is the 1 1/2", tri clamps will give a larger sight glass at the sacrifice of a bazillion more tri clamp fittings. My build as it is has many and just trying to break it up with a few less
Not to mention the tri-clamp route costs a bazillion more dollars.
- Oldvine Zin
- Distiller
- Posts: 2457
- Joined: Sat Jun 06, 2015 9:16 pm
- Location: Pacific Northwest
Re: Christmas Build
A little progress today making short tubes from a long one:
You do not have the required permissions to view the files attached to this post.
- moosemilk
- Master of Distillation
- Posts: 2662
- Joined: Tue Mar 18, 2014 10:47 am
Re: Christmas Build
That is looking fantastic. The stainless ferrules really look sharp on that copper! Thanks for the updates, keep 'em coming please!
- rgreen2002
- Distiller
- Posts: 1313
- Joined: Sun Dec 08, 2013 2:57 pm
- Location: Northeastern USA
Re: Christmas Build
Oldvine Zin wrote: I stumbled upon an 8' long 3" copper tube at almost scrap pricepart of that will be my shotgun condenser
Where exactly does one go to "stumble" upon 8 feet of 3 inch beauty...? I'm looking for copper in all the wrong places...
HD Glossary - Open this
A little spoon feeding *For New & Novice Distillers - start here
BEST WAY TO GET ANSWERS FROM HOME DISTILLER
"In theory there is no difference between theory and practice. In practice there is."
A little spoon feeding *For New & Novice Distillers - start here
BEST WAY TO GET ANSWERS FROM HOME DISTILLER
"In theory there is no difference between theory and practice. In practice there is."
- Oldvine Zin
- Distiller
- Posts: 2457
- Joined: Sat Jun 06, 2015 9:16 pm
- Location: Pacific Northwest
Re: Christmas Build
Craigslist and a bit of drivingrgreen2002 wrote:[
Where exactly does one go to "stumble" upon 8 feet of 3 inch beauty...? I'm looking for copper in all the wrong places...
- raketemensch
- Distiller
- Posts: 2001
- Joined: Sun Nov 09, 2014 2:10 pm
- Location: Tralfamadore
Christmas Build
Nice work, man. She's going to be beautiful.
I agree, the stainless ferrules are striking.
I agree, the stainless ferrules are striking.
- moosemilk
- Master of Distillation
- Posts: 2662
- Joined: Tue Mar 18, 2014 10:47 am
Re: Christmas Build
I picked up an immaculate 51" length of 4" type L copper pipe . . . at scrap copper prices. Best thing to do . . . make friends with the guys at the local scrap yard. Drop by once a week. My length cost me less than $50 Cdn. Hell, if you trust the guy, bring him a pint. The world still does run a lot on the "who you know not what you know" way of thinking. At least in my parts!rgreen2002 wrote:Oldvine Zin wrote: I stumbled upon an 8' long 3" copper tube at almost scrap pricepart of that will be my shotgun condenser
Where exactly does one go to "stumble" upon 8 feet of 3 inch beauty...? I'm looking for copper in all the wrong places...
- Oldvine Zin
- Distiller
- Posts: 2457
- Joined: Sat Jun 06, 2015 9:16 pm
- Location: Pacific Northwest
Re: Christmas Build
+1 moosemilk.moosemilk wrote: I picked up an immaculate 51" length of 4" type L copper pipe . . . at scrap copper prices. Best thing to do . . . make friends with the guys at the local scrap yard. Drop by once a week. My length cost me less than $50 Cdn. Hell, if you trust the guy, bring him a pint. The world still does run a lot on the "who you know not what you know" way of thinking. At least in my parts!
-
yakattack
- Distiller
- Posts: 1755
- Joined: Sun Nov 16, 2014 5:37 am
Re: Christmas Build
Oldvine. Where did you order your slip furred for the 4 inch from. Only been able to find butt weld ones myself...
Yak
Yak
HDNB wrote: The trick here is to learn what leads to a stalled mash....and quit doing that.