Has anyone tried making SPP with different hardness wires?
I've done experiments with hard (spring steel) wire & with soft wire. The spring steel sprung back out too far & the soft didn't open out as much as I'd like.
What have others had success with? 1/4 hard? 1/2 hard? Mig wire?
Any guidance appreciated
Best Grade of Wire for SPP?
Moderator: Site Moderator
-
still_stirrin
- Master of Distillation
- Posts: 10371
- Joined: Tue Mar 18, 2014 7:01 am
- Location: where the buffalo roam, and the deer & antelope play
Re: Best Grade of Wire for SPP?
A couple of threads for you to read:
http://homedistiller.org/forum/viewtopi ... 50&t=49704
http://homedistiller.org/forum/viewtopi ... =2&t=52445
Cheers.
ss
http://homedistiller.org/forum/viewtopi ... 50&t=49704
http://homedistiller.org/forum/viewtopi ... =2&t=52445
Cheers.
ss
My LM/VM & Potstill: My build thread
My Cadco hotplate modification thread: Hotplate Build
My stock pot gin still: stock pot potstill
My 5-grain Bourbon recipe: Special K
My Cadco hotplate modification thread: Hotplate Build
My stock pot gin still: stock pot potstill
My 5-grain Bourbon recipe: Special K