My first try at all grain.... lost I be...

Many like to post about a first successful ferment (or first all grain mash), or first still built/bought or first good run of the still. Tell us about all of these great times here.
Pics are VERY welcome, we drool over pretty copper 8)

Moderator: Site Moderator

Post Reply
User avatar
workpress
Novice
Posts: 80
Joined: Sun Oct 30, 2016 5:25 pm
Location: Kingsville

My first try at all grain.... lost I be...

Post by workpress »

Happy New Year

Today I decided to do an all grain mash
I used
Malted rye 10 lbs
Malted barely 10 lbs
Cracked corn 5 lbs
(In 12 gallons of water) total

First I boiled the corn at 200f for 1.5 hours to breake the starch out
Perhaps 3 gallons corn and liquid.

I boiled up 9 gallons of water and added my rye and barley
along with my corn slime into my fermenter
Stirred the daylights out of it (temp was at 150)
then let it sit. covered in an insulated blanket
Stirring every 15 min for an hour and a half
Things liquified well seems more viscous than
A sweet feed sugar wash...
I tested the sg and it read 1.20 this is where I get lost
Is that high ? Do I need another decimal point
Making it 1.020 then with that number it seems lower?

I think I have at least done something correct as my mash
Is not a sticker mess.

Some clarification would help as I am confused
Thank you

Workpress
User avatar
acfixer69
Global moderator
Posts: 4826
Joined: Mon Dec 20, 2010 3:34 pm
Location: CT USA

Re: My first try at all grain.... lost I be...

Post by acfixer69 »

First thought is, are you temperature correct and are there solids in there.

AC
User avatar
workpress
Novice
Posts: 80
Joined: Sun Oct 30, 2016 5:25 pm
Location: Kingsville

Re: My first try at all grain.... lost I be...

Post by workpress »

No solids I used a mesh mash bag, the hydrometer conversion, could be a problem if I did the math wrong. I will double check.
User avatar
TDick
Distiller
Posts: 1365
Joined: Thu Jun 01, 2017 9:25 pm
Location: Sweet Home

Re: My first try at all grain.... lost I be...

Post by TDick »

I am a NOOB
:mrgreen:
That being said, I suggest going to Tried and True Recipes and find an all grain recipe.
I ASSuME since you joined 2 months ago, you've read Cranky's Spoon Fed and the other "STRONGLY SUGGESTED" posts for Noobs.

Whether you choose to follow the grain bill or not, read the entire thread for the recipe!
It will show you the logic and thought process of someone who has succeeded in what you are trying to do.
Also questions and observations from others who have tried the same recipe.

Just an noob observation, I did NOT read your procedure, but it looks like you used 2 pounds of grain per gallon of water.
I was told use minimum of 2.5 to 3 pounds per gallon.
But again, read a recipe and follow their guidance.
Good luck!
:mrgreen:
Last edited by TDick on Mon Jan 01, 2018 2:32 pm, edited 1 time in total.
zapata
Distiller
Posts: 1664
Joined: Fri Jul 07, 2017 1:06 pm

Re: My first try at all grain.... lost I be...

Post by zapata »

Something is off. No way you could possibly be at 1.200 (you would be below 1.100 even if your grains were 100% sugar).

The word "cracked corn" stands out, corn usually should be ground much finer than a crack. But you're right about the opposite too, 1.020 does seem too low given the high ratio of barley and rye malts should have easily given more than that.

Double check the gravity reading and temperature?
Does it pass the iodine test?
How does it taste?
Last edited by zapata on Mon Jan 01, 2018 2:33 pm, edited 1 time in total.
User avatar
fizzix
Site Donor
Site Donor
Posts: 3698
Joined: Tue Dec 05, 2017 4:08 pm

Re: My first try at all grain.... lost I be...

Post by fizzix »

workpress wrote:...I boiled up 9 gallons of water and added my rye and barley along with my corn slime into my fermenter
Stirred the daylights out of it (temp was at 150) then let it sit...
To clarify, you added rye and barley at 150°right?
The way it's worded it LOOKS like you added them and the corn slime to the 9 gallons of boiling water, and only stirred at 150.
Sorry if I'm reading that wrong.
User avatar
workpress
Novice
Posts: 80
Joined: Sun Oct 30, 2016 5:25 pm
Location: Kingsville

Re: My first try at all grain.... lost I be...

Post by workpress »

Thanks for the replies so far so fast

I added the boiled water (200f) to the 20 lbs of rye and barley
Stirred it up well and then mixed in my corn. Also used some cool water to wash out
My pots. The temperature at this point was 158f.

As for the iodine test I have not done it as i have to get some and will
test it in a couple hours (have to socialize with family...lol) but I am assuming it is ok sort of
because the mash is liquid and not a gummy mess.
jb-texshine
Master of Distillation
Posts: 3036
Joined: Thu Feb 12, 2015 12:03 am
Location: Texan living in Missouri

Re: My first try at all grain.... lost I be...

Post by jb-texshine »

workpress wrote:Thanks for the replies so far so fast

I added the boiled water (200f) to the 20 lbs of rye and barley
Stirred it up well and then mixed in my corn. Also used some cool water to wash out
My pots. The temperature at this point was 158f.

As for the iodine test I have not done it as i have to get some and will
test it in a couple hours (have to socialize with family...lol) but I am assuming it is ok sort of
because the mash is liquid and not a gummy mess.
You denatured the enzymes. The malt mash temp is 148-155 max. Throw some sugar in it or heat the whole lot and hit it with enzymes or malt.
Remember not to blow yourself up,you only get to forget once!


Deo Vendice

Never eat Mexican food north or east of Dallas tx!
User avatar
workpress
Novice
Posts: 80
Joined: Sun Oct 30, 2016 5:25 pm
Location: Kingsville

Re: My first try at all grain.... lost I be...

Post by workpress »

So... even mixing in the grain at 200f into the water for as short time can
denature the enzymes in the grain? Wow interesting ....
User avatar
workpress
Novice
Posts: 80
Joined: Sun Oct 30, 2016 5:25 pm
Location: Kingsville

Re: My first try at all grain.... lost I be...

Post by workpress »

This adventure is based on uncle Jesse’s how I do a cooked rye mash...
User avatar
bitter
Site Donor
Site Donor
Posts: 1999
Joined: Tue Feb 03, 2015 4:51 pm
Location: Great White North

Re: My first try at all grain.... lost I be...

Post by bitter »

Yeah you definitely denatured the enzymes. You could get some more malt heat things up and then add some milled malt (6 row) aiming at a temp of about 145-150f. When making beer you bring the temp to 170 f to stop all conversion and denature the enzymes for mashout. And for beer anything above about 156-158f is not going to get any ferment-able sugars.. You want in the 145-148F ideally for the most ferment-able wort.

B
User avatar
MichiganCornhusker
retired
Posts: 4527
Joined: Mon Jun 23, 2014 9:24 am

Re: My first try at all grain.... lost I be...

Post by MichiganCornhusker »

workpress wrote:So... even mixing in the grain at 200f into the water for as short time can
denature the enzymes in the grain? Wow interesting ....
UJ uses 170F strike water in his rye recipe and the mash quickly goes down to 150f.
Using 200F strike water will definitely wipe out your malts.

I like to add my grains at 150F and then heat the mash back up to 148F.
Some suggest mashing at even lower temps.
Shouting and shooting, I can't let them catch me...
jb-texshine
Master of Distillation
Posts: 3036
Joined: Thu Feb 12, 2015 12:03 am
Location: Texan living in Missouri

Re: My first try at all grain.... lost I be...

Post by jb-texshine »

Homebrewing.com strike water temp calculator is what I use. Wish we had one like it here...
Remember not to blow yourself up,you only get to forget once!


Deo Vendice

Never eat Mexican food north or east of Dallas tx!
zapata
Distiller
Posts: 1664
Joined: Fri Jul 07, 2017 1:06 pm

Re: My first try at all grain.... lost I be...

Post by zapata »

So, assuming you dont have high quality enzymes laying around.... but if you heat it up to 150, you'll want to add about 7 pounds of 2 row or 6 pounds of 6 row malt to convert everything. Based on brewers friend recipe calculator.

Or just add sugar and make it a sugar head.
User avatar
corene1
HD Distilling Goddess
Posts: 3045
Joined: Tue Jan 08, 2013 8:05 pm
Location: The western Valley

Re: My first try at all grain.... lost I be...

Post by corene1 »

I would agree that you denatured your enzymes and you should either reheat your mash to 148-150 and add liquid enzymes or add more water and mash in some more malted grain at 148 to 150 . You could make it into a sugar head also.
Just a thought on your procedure for next time using that grain bill. I would take 7 gallons of water and bring it to a boil then turn off the heat and stir in your crack corn and get it mixed well. Fire up the burner again and bring the mix back to a slow boil stirring constantly for about 15 minuets this will keep it from scorching. Cracked corn is tough to get all the starch out of and it needs a lot of muscle to make it right. Turn the heat off and let it rest at temperature for at least 90 more minuets stirring occasionally. At 185 I use some high temp liquid enzymes but at 5 pounds of corn and 7 gallons of water it shouldn't get too thick. After that I would add the remaining 5 gallons of water and get the entire batch batch of corn and water to 156 degrees and stir in the 20 pounds of malted grains . Make sure they are ground so they will release their starch and enzymes . Hold this at 148 for at least 60 to 90 minuets and stir occasionally. I wrap my mash tun with a heating blanket during this process to help hold the temperature steady. Then let the mash rest and cool. there should be a nice liquid layer on top after awhile. Take a sample of this clear liquid and cool it to do your SG test with ,not the cloudy mash. It should be in the 1.052 to 1.058 range a bit higher or lower depending on the efficiency of your grains and mashing procedure. A perfect conversion should be 1.069 so figure 85% of that would be a very good conversion. Cool the mash down to your yeasts preferred fermentation temperature and there you have it. You should also read about nutrients and PH balances. All are necessary for a good AG mash. Here is a nice calculator to help determine strike water temperatures for any desired grain bill and resting schedule. https://www.brewersfriend.com/mash/" onclick="window.open(this.href);return false;" rel="nofollow.
AG mashes are not difficult but are very demanding that you use proper mash protocall.
User avatar
HDNB
Site Mod
Posts: 7360
Joined: Mon Feb 17, 2014 10:04 am
Location: the f-f-fu frozen north

Re: My first try at all grain.... lost I be...

Post by HDNB »

personally i'd go for the enzyme or more malt...and soon! sugar heading that mess 'o unfermentables is begging for a stall.

hard to distill stalled 1.05 material and get a quality product.

on the bright side, 25 pounds of grain ain't likely gonna break you...so it may be a good time to toss it, take your lumps and make a new mash. after reading a bit more about the process?

but what do i know...2 of my last 5 ferments stalled. beats the shit outta me why. i used the exact ingredients, temperatures and PH on all 5. i think ima go read for a while!
I finally quit drinking for good.

now i drink for evil.
User avatar
workpress
Novice
Posts: 80
Joined: Sun Oct 30, 2016 5:25 pm
Location: Kingsville

Re: My first try at all grain.... lost I be...

Post by workpress »

Wow I am always amazed at the helpfulness here thank you guys
I gave a lot to learn and I am in the correct place for that I will keep
you posted... I am going to get som liquid enzymes tomorrow...

Thanks for the help

Workpress
User avatar
workpress
Novice
Posts: 80
Joined: Sun Oct 30, 2016 5:25 pm
Location: Kingsville

Re: My first try at all grain.... lost I be...

Post by workpress »

So I re heated my mash up to 145f
and added amylase enzyme stirred it in and let it hold at temp for 1 hour
I sampled again with my hydrometer and corrected the reading to be
sg 1.075 still on the low side but I pitched my yeast so we will see how
it ferments.

Again thank you for the great advice

Workpress
StillerBoy
Master of Distillation
Posts: 3387
Joined: Thu Dec 01, 2016 6:27 pm
Location: Ontario

Re: My first try at all grain.... lost I be...

Post by StillerBoy »

Hope you gave it a good stir to oxygenate the mash, and watch the Ph within 24 hours..

HDNB.. it may apply to you on your stalled ferments..

Mars
" I know quite certainly that I myself have no special talent. Curiosity, Obsession and dogged endurance, combined with self-criticism, have brought me to my knowledge and understanding "

– Albert Einstein
User avatar
fizzix
Site Donor
Site Donor
Posts: 3698
Joined: Tue Dec 05, 2017 4:08 pm

Re: My first try at all grain.... lost I be...

Post by fizzix »

workpress, here are a couple of charts that got my mind right over the heat/enzyme issues:
denature chart.jpg
chart2.JPG
User avatar
workpress
Novice
Posts: 80
Joined: Sun Oct 30, 2016 5:25 pm
Location: Kingsville

Re: My first try at all grain.... lost I be...

Post by workpress »

Thank you the time temp chart on top is great.

Thank you

Workpress
User avatar
still_stirrin
Master of Distillation
Posts: 10337
Joined: Tue Mar 18, 2014 7:01 am
Location: where the buffalo roam, and the deer & antelope play

Re: My first try at all grain.... lost I be...

Post by still_stirrin »

workpress wrote:Thank you the time temp chart on top is great.
And “the curve” for 170*F would be a vertical line ON the Y-axis....no measreable time of activity...denatured immediately.
ss
My LM/VM & Potstill: My build thread
My Cadco hotplate modification thread: Hotplate Build
My stock pot gin still: stock pot potstill
My 5-grain Bourbon recipe: Special K
User avatar
workpress
Novice
Posts: 80
Joined: Sun Oct 30, 2016 5:25 pm
Location: Kingsville

Re: My first try at all grain.... lost I be...

Post by workpress »

Hi fellas

So to update you on my progress with this all grain adventure, I have learned a lot and have more work to do on my second attempt. Thank you all again.

So my wash fermented out in 9 days due to the cooler temps. And my sg was at 0.995. I tan it through my pot still and the alcohol was quite fruity and mellow the final collection was at 74% when the two runs were mixed into my aging jar. I then toasted and charred some red oak cubes and am letting it age so far the coloure is a light pink and the smell is fabulous. So I will wait and see what happens to it in 6 months lol

Thank you again for the advice and comments

Workpress
User avatar
fizzix
Site Donor
Site Donor
Posts: 3698
Joined: Tue Dec 05, 2017 4:08 pm

Re: My first try at all grain.... lost I be...

Post by fizzix »

Hey that's great. Nice low finish at 0.995, too.
User avatar
rgreen2002
Site Donor
Site Donor
Posts: 1309
Joined: Sun Dec 08, 2013 2:57 pm
Location: Northeastern USA

Re: My first try at all grain.... lost I be...

Post by rgreen2002 »

Good on you workpress.

Two pieces of advice for the future:

1. Read here: http://braukaiser.com/wiki/index.php?ti ... Conversion" onclick="window.open(this.href);return false;" rel="nofollow
The info is "must know" IMHO if you plan on continuing in all grain. The second graph above comes from this site. Usually, still_stirrin drops this bomb on folks(like me). I beat him to the punch :lol:

2. Have a look here: https://enzymash.biz/index.php?route=common/home" onclick="window.open(this.href);return false;" rel="nofollow
Liquid enzymes, again IMHO, give you a more complete conversion and in the long run will be cheaper than malting or purchasing pounds of malted grains. I have not really noticed a taste difference and last I recall no one else has posted about a real difference as of yet( I haven't looked in a while TBH). They are idiot proof for idiots like me!
HD Glossary - Open this
A little spoon feeding *For New & Novice Distillers - start here
BEST WAY TO GET ANSWERS FROM HOME DISTILLER
"In theory there is no difference between theory and practice. In practice there is."
User avatar
jonnys_spirit
Site Donor
Site Donor
Posts: 3629
Joined: Wed Oct 21, 2015 7:58 am
Location: The Milky Way

Re: My first try at all grain.... lost I be...

Post by jonnys_spirit »

workpress wrote:Hi fellas

So to update you on my progress with this all grain adventure, I have learned a lot and have more work to do on my second attempt. Thank you all again.

So my wash fermented out in 9 days due to the cooler temps. And my sg was at 0.995. I tan it through my pot still and the alcohol was quite fruity and mellow the final collection was at 74% when the two runs were mixed into my aging jar. I then toasted and charred some red oak cubes and am letting it age so far the coloure is a light pink and the smell is fabulous. So I will wait and see what happens to it in 6 months lol

Thank you again for the advice and comments

Workpress
Hey WP, you might want to pull that red oak and look for some barrel staves or something (white oak). Red oak is much more resinous and I heard it makes liquor smell or taste like cat urine but I could be wrong - I read that on the interwebs.

Good luck and cheers!
-j
————
i prefer my mash shaken, not stirred
————
User avatar
acfixer69
Global moderator
Posts: 4826
Joined: Mon Dec 20, 2010 3:34 pm
Location: CT USA

Re: My first try at all grain.... lost I be...

Post by acfixer69 »

jonnys_spirit wrote:
workpress wrote:Hi fellas

So to update you on my progress with this all grain adventure, I have learned a lot and have more work to do on my second attempt. Thank you all again.

So my wash fermented out in 9 days due to the cooler temps. And my sg was at 0.995. I tan it through my pot still and the alcohol was quite fruity and mellow the final collection was at 74% when the two runs were mixed into my aging jar. I then toasted and charred some red oak cubes and am letting it age so far the coloure is a light pink and the smell is fabulous. So I will wait and see what happens to it in 6 months lol

Thank you again for the advice and comments

Workpress
Hey WP, you might want to pull that red oak and look for some barrel staves or something (white oak). Red oak is much more resinous and I heard it makes liquor smell or taste like cat urine but I could be wrong - I read that on the interwebs.

Good luck and cheers!
-j
Red oak is called piss oak up here and makes good pallets.

AC
User avatar
workpress
Novice
Posts: 80
Joined: Sun Oct 30, 2016 5:25 pm
Location: Kingsville

Re: My first try at all grain.... lost I be...

Post by workpress »

You guys are a wealth of information, thank you. I did just find a source for whiskey
Barrel stays just two towns over from me, so I am set up. I am slowly going to look for some liquid enzyme
Locally first, then on the web if I have no luck.
Thank you all
Workpress
User avatar
fizzix
Site Donor
Site Donor
Posts: 3698
Joined: Tue Dec 05, 2017 4:08 pm

Re: My first try at all grain.... lost I be...

Post by fizzix »

As rgreen linked: EnzyMash is a great source for liquid enzymes.
Those are very popular here.
I happen to use Brewhaus Dry Alpha & Gluco enzymes with great success also. Busts up Booner's all-corn nicely.
These would be a second choice. I use them because I'm loyal to Brewhaus (they are just good folks is all) and bought a shit load of it.
Post Reply