Mop wringers for grains

Fittings, parrots, packing, tooling and so on.

Moderator: Site Moderator

Post Reply
User avatar
Brutal
Site Donor
Site Donor
Posts: 1344
Joined: Sat May 18, 2013 6:02 pm

Mop wringers for grains

Post by Brutal » Thu Dec 25, 2014 10:09 pm

Which exact mop wringer did you buy and what you you like about it or wish was better?

I need one asap. I just squeezed 50 pounds of grain and I don't even think i could punch the clown right now.
Steam injection rig http://tinyurl.com/kxmz8hy
All grain corn mash with steam injection and enzymes http://tinyurl.com/mp6zdt5
Inner tube condenser http://tinyurl.com/zkp3ps6

User avatar
shadylane
Site Donor
Site Donor
Posts: 7358
Joined: Sat Oct 27, 2007 11:54 pm
Location: Hiding In the Boiler room of the Insane asylum

Re: Mop wringers for grains

Post by shadylane » Fri Dec 26, 2014 2:29 am

Bought one of theses from lowes.
Not real impressed with it, but it works a hell of a lot better than hand squeezing.
Attachments
086876176445 (400x400).jpg

Bohunk
Angel's Share
Angel's Share
Posts: 165
Joined: Mon Mar 05, 2007 7:30 am
Location: Where the Big Red Play

Re: Mop wringers for grains

Post by Bohunk » Fri Dec 26, 2014 5:31 am

I bought the same one ShadyLane has, not really happy with it, but it does beat a hand job !! I wish I had one of those old fashioned ones made from metal, this plastic one has a lot of spring in it, and you can't really bear down on it like I want to. Better than nothing, I guess.

The Ole Bohunk

User avatar
moosemilk
Site Donor
Site Donor
Posts: 2661
Joined: Tue Mar 18, 2014 10:47 am

Re: Mop wringers for grains

Post by moosemilk » Fri Dec 26, 2014 11:39 am

I have the same one as well. Just don't fill it with too much grain and it works well. Squeeze a little out at a time.

User avatar
corene1
HD Distilling Goddess
Posts: 3023
Joined: Tue Jan 08, 2013 8:05 pm
Location: The western Valley

Re: Mop wringers for grains

Post by corene1 » Fri Dec 26, 2014 11:54 am

Mine is very similar to that one, I got it at Lowe's. It has the metal handle and the pivot assembly is all metal. I use the 5 gallon paint strainer bags and fill it about 1/2 full, it will take my grains to almost dry. I typically lose about 1/2 to 3/4 of a gallon from a 10 gallon mash. I don't squeeze the last bit of the grain bed where all the yeast and barm is laying.

User avatar
Brutal
Site Donor
Site Donor
Posts: 1344
Joined: Sat May 18, 2013 6:02 pm

Re: Mop wringers for grains

Post by Brutal » Fri Dec 26, 2014 1:07 pm

Has anyone tried just getting the replacement squeezer and hanging it on a bucket?
Steam injection rig http://tinyurl.com/kxmz8hy
All grain corn mash with steam injection and enzymes http://tinyurl.com/mp6zdt5
Inner tube condenser http://tinyurl.com/zkp3ps6

ShineRunnah
Swill Maker
Posts: 313
Joined: Tue Nov 04, 2014 11:44 pm

Re: Mop wringers for grains

Post by ShineRunnah » Fri Dec 26, 2014 1:30 pm

Tried a mop wringer.Use an apple press now. Way better. Costs more, but it works a lot better.

User avatar
corene1
HD Distilling Goddess
Posts: 3023
Joined: Tue Jan 08, 2013 8:05 pm
Location: The western Valley

Re: Mop wringers for grains

Post by corene1 » Fri Dec 26, 2014 1:34 pm

Brutal wrote:Has anyone tried just getting the replacement squeezer and hanging it on a bucket?
With the narrow bottom of the bucket it is a little tippy.

User avatar
Truckinbutch
Site Donor
Site Donor
Posts: 7947
Joined: Sun Feb 03, 2013 12:49 pm

Re: Mop wringers for grains

Post by Truckinbutch » Fri Dec 26, 2014 1:48 pm

ShineRunnah wrote:Tried a mop wringer.Use an apple press now. Way better. Costs more, but it works a lot better.
AH HA ! Lightbulb just went on :idea: I got all the parts to make a press : 20 ton long stroke hydraulic cylinder , wood , metal , and tools to build the press I have been putting off because the apple crop has been failing every year here . Bet that will knock the socks off a mop bucket .............
If you ain't the lead dog in the team , the scenery never changes . Ga Flatwoods made my avatar and I want to thank him for that .
Don't drink water , fish fornicate in it .

User avatar
shadylane
Site Donor
Site Donor
Posts: 7358
Joined: Sat Oct 27, 2007 11:54 pm
Location: Hiding In the Boiler room of the Insane asylum

Re: Mop wringers for grains

Post by shadylane » Fri Dec 26, 2014 2:24 pm

I've got a apple press and the mop wringer is easier to use for squeezing mash.

User avatar
moosemilk
Site Donor
Site Donor
Posts: 2661
Joined: Tue Mar 18, 2014 10:47 am

Re: Mop wringers for grains

Post by moosemilk » Fri Dec 26, 2014 2:36 pm

Ohhhhh, TB just made my light bulb go on. Got a MIG welder for Christmas and on top of a few things I need to fix, I have been thinking of other projects. Apple press!

User avatar
Prospekt
Novice
Posts: 75
Joined: Thu Nov 21, 2013 10:04 am
Location: North of 49

Re: Mop wringers for grains

Post by Prospekt » Sun Jan 04, 2015 6:16 pm

I feel your pain Brutal. I've sworn off fermenting on-grain entirely after a season of ripped cloths, sloppy funnels, messy floors, and sore, pruny hands. False bottom...here we come.
Learn from yesterday, live for today.

User avatar
Brutal
Site Donor
Site Donor
Posts: 1344
Joined: Sat May 18, 2013 6:02 pm

Re: Mop wringers for grains

Post by Brutal » Fri Jan 16, 2015 8:56 pm

Almost forgot to come back and update this. I did order a mop bucket and I didn't get the same rubbermaid as everyone else. Call me devil's advocate :moresarcasm: So I got the "Genuine Joe" splash guard from Amazon. I think I works really good. Hell of a lot better than these old mitts do. It is of course plastic but bending was minimal in my one-time-so-far experience. I elected to leave the wheels off of it. I just set it on the floor. It's not like I'm going to be doing different ferments in different rooms. This kept it from rolling while I was pushing on it. The side of the bucket did bend when I put a lot of pressure on it, but it wasn't any big deal. It's a strong design bucket and it has rough graduated marks in it so you can tell when you can't pick it up anymore. The handle is great, and there is a handle spot under the back that makes it good for pouring. Another striking thing about it was that it's so clean when you get it. I didn't want to use a brush on it but I just rinsed it out with a dish rag and hot water. I could not detect any smell from the plastic at all. It's make of #5 Polypropylene. I paid less the the rubbermaid too. If you need a mop bucket check this out.
http://www.amazon.com/Genuine-Joe-GJO60 ... B001PMJUKI
Steam injection rig http://tinyurl.com/kxmz8hy
All grain corn mash with steam injection and enzymes http://tinyurl.com/mp6zdt5
Inner tube condenser http://tinyurl.com/zkp3ps6

User avatar
raketemensch
Site Donor
Site Donor
Posts: 1994
Joined: Sun Nov 09, 2014 2:10 pm
Location: Tralfamadore

Re: Mop wringers for grains

Post by raketemensch » Fri Jan 26, 2018 10:52 am

Brutal wrote:Almost forgot to come back and update this. I did order a mop bucket and I didn't get the same rubbermaid as everyone else. Call me devil's advocate :moresarcasm: So I got the "Genuine Joe" splash guard from Amazon. I think I works really good. Hell of a lot better than these old mitts do. It is of course plastic but bending was minimal in my one-time-so-far experience. I elected to leave the wheels off of it. I just set it on the floor. It's not like I'm going to be doing different ferments in different rooms. This kept it from rolling while I was pushing on it. The side of the bucket did bend when I put a lot of pressure on it, but it wasn't any big deal. It's a strong design bucket and it has rough graduated marks in it so you can tell when you can't pick it up anymore. The handle is great, and there is a handle spot under the back that makes it good for pouring. Another striking thing about it was that it's so clean when you get it. I didn't want to use a brush on it but I just rinsed it out with a dish rag and hot water. I could not detect any smell from the plastic at all. It's make of #5 Polypropylene. I paid less the the rubbermaid too. If you need a mop bucket check this out.
http://www.amazon.com/Genuine-Joe-GJO60 ... B001PMJUKI
Sorry for the necro, but are you still happy with this wringer?

User avatar
Brutal
Site Donor
Site Donor
Posts: 1344
Joined: Sat May 18, 2013 6:02 pm

Re: Mop wringers for grains

Post by Brutal » Sat May 12, 2018 7:36 pm

Sorry for the months late response bubba.

We moved to the country close to two years ago. It was rough move, and I thought I would have MORE free time here. LOLOLOLOLOLOLOOOO. I haven't made anything since then. I actually made a 20 gallon ujssm starter mash but it is still sitting in the fermenters to this day. And I think it turned.. That wringer was good. I'm not saying someone couldn't build a better one, but its not a bad investment at all. Brutal says go for it!
Steam injection rig http://tinyurl.com/kxmz8hy
All grain corn mash with steam injection and enzymes http://tinyurl.com/mp6zdt5
Inner tube condenser http://tinyurl.com/zkp3ps6

User avatar
fizzix
Site Donor
Site Donor
Posts: 3696
Joined: Tue Dec 05, 2017 4:08 pm

Re: Mop wringers for grains

Post by fizzix » Sat May 12, 2018 7:54 pm

I've used the F^CK out of my Genuine Joe GJO02347 wringer for both distilling and beer brewing grains.
Wouldn't trade it.
It drains a grain bed, leaving the grain damp only. I sparge and wring beer grain with same effective results.
I don't remember who tipped me off on using one of these, but I remember he said it was a life changer.
It is.

User avatar
jon1163
Site Donor
Site Donor
Posts: 499
Joined: Wed Jul 05, 2017 8:57 pm

Re: Mop wringers for grains

Post by jon1163 » Sat May 12, 2018 8:16 pm

fizzix wrote:I've used the F^CK out of my Genuine Joe GJO02347 wringer for both distilling and beer brewing grains.
Wouldn't trade it.
It drains a grain bed, leaving the grain damp only. I sparge and wring beer grain with same effective results.
I don't remember who tipped me off on using one of these, but I remember he said it was a life changer.
It is.
+1. just don't get greedy and try to wring too much at once. slow and easy wins the race. I can wring 30 gallons of mash in about 20 minutes

User avatar
Durhommer
Distiller
Posts: 2217
Joined: Tue Mar 12, 2019 11:23 am

Re: Mop wringers for grains

Post by Durhommer » Wed Aug 28, 2019 7:39 am

jon1163 wrote:
Sat May 12, 2018 8:16 pm
fizzix wrote:I've used the F^CK out of my Genuine Joe GJO02347 wringer for both distilling and beer brewing grains.
Wouldn't trade it.
It drains a grain bed, leaving the grain damp only. I sparge and wring beer grain with same effective results.
I don't remember who tipped me off on using one of these, but I remember he said it was a life changer.
It is.
+1. just don't get greedy and try to wring too much at once. slow and easy wins the race. I can wring 30 gallons of mash in about 20 minutes
Same bucket here seems solid enough and yeah I just cleaned with hot water and starsan'd it .I feel silly now all the juice ive thrown out not wringing
You have two ears and one mouth for a reason....

Post Reply