Tower of Power
Moderator: Site Moderator
-
PipeWelder316
- Novice
- Posts: 40
- Joined: Sun Jul 02, 2017 3:36 pm
Re: Tower of Power
Maybe this will help you or someone else out. viewtopic.php?f=50&t=67217
-
Burl Jerkins
- Novice
- Posts: 31
- Joined: Sun Feb 11, 2018 11:59 am
Re: Tower of Power
Thanks! Turned it on at 6 this morning. So far so good. Looks like I'll finish 30-35 ahead of the gas this time. Started with a really cold wash cause I skipped a week to mash in another batch, thus removing today's wash from the warming pads and just letting it sit in the garage. Was 41 degrees, usually start a wash at 75+. So that added to the time. I'm thinking overall, the electric will shave 60-75 minutes off a run. It's so much easier to control the going with a flame. And no unwanted heat/moisture/COs let into the room.acfixer69 wrote:That looks awesome Burl. Good luck on Saturday.
AC
-
still_stirrin
- Master of Distillation
- Posts: 10371
- Joined: Tue Mar 18, 2014 7:01 am
- Location: where the buffalo roam, and the deer & antelope play
Re: Tower of Power
Burl Jerkins wrote:...It's so much easier to control the going with a flame. And no unwanted heat/moisture/COs let into the room.
My LM/VM & Potstill: My build thread
My Cadco hotplate modification thread: Hotplate Build
My stock pot gin still: stock pot potstill
My 5-grain Bourbon recipe: Special K
My Cadco hotplate modification thread: Hotplate Build
My stock pot gin still: stock pot potstill
My 5-grain Bourbon recipe: Special K